Peter W Posted March 31, 2021 Author Share Posted March 31, 2021 29 minutes ago, coneheadff said: Great job on the NLG!! I did it the easy way and took the Eduard wheels...this set includes the lower part of the leg. So you can just cut away the original part, drill a hole in the leg and insert the resin part. Hi Alex - annoyingly I only found out that the Eduard ones included that part after I had done this, otherwise I would have taken the same route. I now know for the next one though 👍 1 Link to comment Share on other sites More sharing options...
Hewy Posted March 31, 2021 Share Posted March 31, 2021 Fine job on the wheel extraction pete, definitely moving in the right direction 👍 Link to comment Share on other sites More sharing options...
coneheadff Posted April 1, 2021 Share Posted April 1, 2021 On 3/31/2021 at 12:13 PM, Peter W said: Hi Alex - annoyingly I only found out that the Eduard ones included that part after I had done this, otherwise I would have taken the same route. I now know for the next one though 👍 At least you didn't completely freak out on that gear. I did and it killed my mojo... 4 1 Link to comment Share on other sites More sharing options...
modelling minion Posted April 1, 2021 Share Posted April 1, 2021 1 hour ago, coneheadff said: At least you didn't completely freak out on that gear. I did and it killed my mojo... That is some fantastic detailing on the brake lines Alex, absolutely superb. You can do mine if you like. 1 Link to comment Share on other sites More sharing options...
coneheadff Posted April 1, 2021 Share Posted April 1, 2021 12 minutes ago, modelling minion said: That is some fantastic detailing on the brake lines Alex, absolutely superb. You can do mine if you like. Thanks Craig! I really had a lot of fun doing that, but then kid's homeschooling started and my missus had some great ideas what I could do at home while I'm on reduced working hours. Boy...wish I could get back to 100% 😜 Even working every day on a Scarebus...oops, I mean Airbus...is more fun. 1 1 Link to comment Share on other sites More sharing options...
Shalako Posted April 1, 2021 Share Posted April 1, 2021 Top notch work on those legs mate!!! 1 Link to comment Share on other sites More sharing options...
Peter W Posted April 1, 2021 Author Share Posted April 1, 2021 Great looking legs Alex 👍 1 Link to comment Share on other sites More sharing options...
coneheadff Posted April 1, 2021 Share Posted April 1, 2021 8 minutes ago, Peter W said: Great looking legs Alex 👍 Thanks a lot Pete and sorry for hijacking your thread. Won't happen again 😁 Link to comment Share on other sites More sharing options...
Peter W Posted April 2, 2021 Author Share Posted April 2, 2021 16 hours ago, coneheadff said: Thanks a lot Pete and sorry for hijacking your thread. Won't happen again 😁 Hijack away Alex, don’t ever a problem when it contributes to the thread 👍 1 Link to comment Share on other sites More sharing options...
basket Posted April 2, 2021 Share Posted April 2, 2021 Hi ! Your work on the legs is a real state of the art . Keep on the good job !! 1 Link to comment Share on other sites More sharing options...
modelling minion Posted April 25, 2021 Share Posted April 25, 2021 Hi Pete, have you been able to do any more progress on your excellent OA-4M? Link to comment Share on other sites More sharing options...
Peter W Posted April 25, 2021 Author Share Posted April 25, 2021 7 hours ago, modelling minion said: Hi Pete, have you been able to do any more progress on your excellent OA-4M? Hi Craig, yes but not moving as quickly as I’d like. I’ve got some paint, bottom and one top colour, on it but not there yet. There should be some pictures soon though, just need to get a little bit more focused. Pete 1 Link to comment Share on other sites More sharing options...
modelling minion Posted April 25, 2021 Share Posted April 25, 2021 Good to know that she is still moving forward Pete, plenty of time left before the end of the GB. Link to comment Share on other sites More sharing options...
Peter W Posted May 6, 2021 Author Share Posted May 6, 2021 I'm back.... Not the most inspiring of pictures nor updates but I thought that I'd better post something to show that I'm still doing something, even if it's at a snail pace. All the colours are on and it's all shiny, ready for decals. I'm finally at the stage where it starts coming together. Back.. sometime soon Pete 8 Link to comment Share on other sites More sharing options...
modelling minion Posted May 6, 2021 Share Posted May 6, 2021 Looking really good Pete, very nice job on the painting and a nice glossy coat ready for the decals too. 1 Link to comment Share on other sites More sharing options...
Peter W Posted May 13, 2021 Author Share Posted May 13, 2021 (edited) Back with another small update but some good steps having been taken. I started to get the decals on and it soon became obvious that the colour mismatch between them and the paint is quite huge. I used Hataka FS34095 Field Green but it's not even close to the decals. In fact, when I then had to touch up a bit of green on the decals, I used Xtracrylix FS34092 to match them. I therefore have no idea which one is correct but not going to lose too much sleep over it now. The longer I look at then the less annoyed I am, so onwards and upwards. The decals went on without too much trouble but there's always one and this one was one of the MARINES decals that caused me a bit of grief and led to the aforementioned touching up afterwards. Thankfully there weren't that many so didn't take too long. After that I added some dirt using Flory-models dark dirt, which got me here: Next was to add some of the loose bits and get it ready for a matt coat: I'm trying to work out what sort of armament that the OA-4M would carry and, as far as I can see, a combination of LAU-10/A Zuni and AGM-45 Shrike on the outer pylons wouldn't be wrong. If anyone knows different then please let me know before I go too far down a wrong avenue. Pete Edited May 13, 2021 by Peter W 5 Link to comment Share on other sites More sharing options...
modelling minion Posted May 13, 2021 Share Posted May 13, 2021 Very nice work Pete, she is looking great. Getting the colours of decals and paint work to match up can be very troublesome as I have had both decals and paint that are not the colours they claim to be which leaves touching up inevitable. For the stores on the outer pylons I would be inclined to go with the LAU-10 as these aircraft were primarily used for fast FAC duties. 2 Link to comment Share on other sites More sharing options...
Peter W Posted May 13, 2021 Author Share Posted May 13, 2021 21 minutes ago, modelling minion said: Very nice work Pete, she is looking great. Getting the colours of decals and paint work to match up can be very troublesome as I have had both decals and paint that are not the colours they claim to be which leaves touching up inevitable. For the stores on the outer pylons I would be inclined to go with the LAU-10 as these aircraft were primarily used for fast FAC duties. Thanks for your thoughts on the weapons Craig. I am really struggling to get any definitive information on this part of the OA-4M. Pete 1 Link to comment Share on other sites More sharing options...
modelling minion Posted May 13, 2021 Share Posted May 13, 2021 14 minutes ago, Peter W said: I am really struggling to get any definitive information on this part of the OA-4M. There is surprisingly little information out there for anything to with the OA-4M including the weapons carried by them, the best thing to do is to scour through any pictures of them you can find in service. Link to comment Share on other sites More sharing options...
Peter W Posted May 16, 2021 Author Share Posted May 16, 2021 OK, so there I was beavering away on this one and suddenly it was finished. I had a couple of great days modelling over the weekend and crossed the finish line today. Last picture here and then off to update the gallery. This group build has been great fun and can't wait for the next one now. Pete 7 Link to comment Share on other sites More sharing options...
basket Posted May 16, 2021 Share Posted May 16, 2021 And another very nice scooter !!! Congrats to you ! 1 Link to comment Share on other sites More sharing options...
modelling minion Posted May 16, 2021 Share Posted May 16, 2021 Well that turned out absolutely fantastic Pete. I really like this scheme and you have done a great job on it. Good to see that you found some Zuni pods for it too, they look very good. The weathering is very nice and subtle and highlights the details and gives her a "used" look without being overdone. Thanks for taking part in the GB and well done on producing such an excellent model. 1 Link to comment Share on other sites More sharing options...
Peter W Posted May 17, 2021 Author Share Posted May 17, 2021 11 hours ago, modelling minion said: Well that turned out absolutely fantastic Pete. I really like this scheme and you have done a great job on it. Good to see that you found some Zuni pods for it too, they look very good. The weathering is very nice and subtle and highlights the details and gives her a "used" look without being overdone. Thanks for taking part in the GB and well done on producing such an excellent model. Thanks Craig, it’s been a fun group build to take part in. I’m now going to poke my head above the covers and take a look at the other builds. I’m so guilty of focussing on my own build and missing all the good stuff going on, including your’s which turned out looking great. Pete 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now