ThreeGreens Posted February 27, 2021 Share Posted February 27, 2021 Great stuff. I’m watching your progress with interest Mark as I’m at the early stages of building the 1:48 SMER swordfish floatplane. It’s an old very basic kit so I’m having to decide how much I want to embellish it. Certainly I’ll improve the cockpit which has no real detailing to speak of. I haven’t got round to putting up a WIP on my progress to date. Must get that sorted in the next few days. Cheers. Phil 2 Link to comment Share on other sites More sharing options...
Teuchter Posted February 27, 2021 Share Posted February 27, 2021 @ThreeGreens that the old Merit kit, I remember back in the 60s, my gran buying it for me on holiday in Coatbridge, then building it at her house, cant remember how I got it home 😀 Looked like a Swordfish to me. Don Link to comment Share on other sites More sharing options...
Marklo Posted February 27, 2021 Author Share Posted February 27, 2021 . 1 hour ago, ThreeGreens said: I’m at the early stages of building the 1:48 SMER swordfish floatplane Goid luck on that one. I’ve built a few Smers and they weren’t that bad. There’s quite a bit of detail in the Airfix kit. You’ll have quite a bit to do even to match it and unlike a lot of open cockpit types everything’s very visible even when fully assembled 1 Link to comment Share on other sites More sharing options...
Marklo Posted February 28, 2021 Author Share Posted February 28, 2021 (edited) Working on the wings. All the struts attached to the upper wing and the rigging lines in. I’ve drilled the lower wings for the stores and drilled and I’ve carved grooves for the rigging lines, based on the clearances of the upper wing and the slight seam line I have on it. If I were doing this again I think I’d start with the lower wing. Edited February 28, 2021 by Marklo 4 Link to comment Share on other sites More sharing options...
Marklo Posted February 28, 2021 Author Share Posted February 28, 2021 (edited) Wing sections complete as is the rigging and dry fitted to the rest of the build. Almost ready for primer. The little bits of masking tape are a desperate attempt to close the hairline gap between the wing pieces, some PPP will probably be needed. Edited February 28, 2021 by Marklo 6 Link to comment Share on other sites More sharing options...
bigbadbadge Posted February 28, 2021 Share Posted February 28, 2021 Good progress Mark, this has come together quickly, good idea for the recessed areas for the rigging Chris 1 Link to comment Share on other sites More sharing options...
Marklo Posted February 28, 2021 Author Share Posted February 28, 2021 5 minutes ago, bigbadbadge said: good idea for the recessed areas for the rigging It’s a great kit but it’s probably the first Airfix oob build that’s forcing me to think ( which is no bad thing btw ) 1 Link to comment Share on other sites More sharing options...
CedB Posted March 1, 2021 Share Posted March 1, 2021 Just caught up with this one Mark - quick progress! Looking good I have one in the stash so thanks for the heads up on the problems. 1 Link to comment Share on other sites More sharing options...
Marklo Posted March 1, 2021 Author Share Posted March 1, 2021 Primed and preshaded. Not sure if I should do the grey or the silver first. 2 Link to comment Share on other sites More sharing options...
Marklo Posted March 1, 2021 Author Share Posted March 1, 2021 Now I have a question for everyone. I’m building with wings folded and doing the silver prewar scheme from the kit. There are a number of bombs to be fitted but my question is this. In practice would the wings have been folded with ordinance attached ? Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 1, 2021 Share Posted March 1, 2021 Looks great Mark, absolutely no idea re the ordinance question fella. Chris Link to comment Share on other sites More sharing options...
Grey Beema Posted March 1, 2021 Share Posted March 1, 2021 My understanding is that the aircraft would be prepped for flight wing folded with wings only swung out as the launch cycle. Was in progress. Link to comment Share on other sites More sharing options...
dogsbody Posted March 1, 2021 Share Posted March 1, 2021 You can just make out the bombs on this Swordfish: It's not easy to find a photo of a Swordfish, with folded wings, with a load of bombs on the racks. Chris 4 1 Link to comment Share on other sites More sharing options...
Marklo Posted March 2, 2021 Author Share Posted March 2, 2021 Thanks Chris. Bombs assembled and painted. First time I’ve ever airbrushed a bomb. Yellow on flat yellow with a drop of orange. Grey on.will let it all set before masking off for the silver. 6 Link to comment Share on other sites More sharing options...
Marklo Posted March 4, 2021 Author Share Posted March 4, 2021 Silver on a mix of Tamiya silver and extra dark sea grey. Unmasked with wings dry fitted. Happy with that. 3 Link to comment Share on other sites More sharing options...
Marklo Posted March 4, 2021 Author Share Posted March 4, 2021 Couldn’t resist starting on the decals. 6 Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 4, 2021 Share Posted March 4, 2021 Looking good Mark. Chris 1 Link to comment Share on other sites More sharing options...
CedB Posted March 5, 2021 Share Posted March 5, 2021 Seconded! 1 Link to comment Share on other sites More sharing options...
Marklo Posted March 5, 2021 Author Share Posted March 5, 2021 A little progress. Spit the obvious gotya, yes the G5K decal is one piece but is supposed to go either side of the interplane struts and of course I had already soaked the decals before realising this. Still fixed with a sharp scalpel and a few expletives. 4 Link to comment Share on other sites More sharing options...
bigbadbadge Posted March 5, 2021 Share Posted March 5, 2021 Ahh yes done similar , the expletives certainly help !!! Great job Mark. Chris 2 Link to comment Share on other sites More sharing options...
Marklo Posted March 7, 2021 Author Share Posted March 7, 2021 Inching along. 6 Link to comment Share on other sites More sharing options...
Marklo Posted March 19, 2021 Author Share Posted March 19, 2021 Getting there. Last of the decals and the tail rigging added. Wings and bombs on next I think. 2 Link to comment Share on other sites More sharing options...
2996 Victor Posted March 19, 2021 Share Posted March 19, 2021 Looking great, Mark, that's really coming together now! 1 Link to comment Share on other sites More sharing options...
Marklo Posted March 30, 2021 Author Share Posted March 30, 2021 (edited) Running out of things to stick on. Wings attached. I found that awfully tricky and particularly fiddly to get the restraining hooks on. Judt the prop, the little bombs a few brackets and an rf wire and I think it’s done. And of course the carpet monster has claimed the spinner, darn….. Edited March 30, 2021 by Marklo 5 Link to comment Share on other sites More sharing options...
2996 Victor Posted March 30, 2021 Share Posted March 30, 2021 Wow! Superb! Hope the carpet monster gives up the spinner..... Cheers, Mark 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now