Evil_Toast_RSA Posted February 12, 2021 Share Posted February 12, 2021 (edited) My FW-190 I started this week has hit the point of IDGAF with some fixes I don't feel like doing right now, so onto the shelf of future inspiration it goes. So, will do a Sea Fury instead. I think by now it's old hat here, so no sprue shots are needed. However, have an Eduard PE set for it! #49878 for anyone curious. So. Will use box markings for the Korean War option, and will never know why they never included the one that shot down a MiG-15, that feat being so mundane and all. Anywho. Gonna start getting plastic shaved for PE, and see which parts I got short shot in my box. Huzzah! [Edit] - will also use Eduard RAF belts from set #49006. Feel free to point out my faux pas, but I'm dead sure the correct style is included. Edited April 5, 2021 by Evil_Toast_RSA 5 Link to comment Share on other sites More sharing options...
Jeff G Posted February 12, 2021 Share Posted February 12, 2021 Can't wait to see how it goes 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 12, 2021 Author Share Posted February 12, 2021 8 minutes ago, Jeff G said: Can't wait to see how it goes Neither can I. I'm used to my amateur skillz, are you? 😆 Anyway, off to a great start. This is what the tailplane looks like without one of Airfix's " "features" ". Trying to remember where else the features were in this kit. Think one of the bits on the cockpit bulkhead? 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 12, 2021 Author Share Posted February 12, 2021 Got the tub started, and calling it a night before my squint becomes permanent 🥴. 7 Link to comment Share on other sites More sharing options...
wellsprop Posted February 12, 2021 Share Posted February 12, 2021 I'm pulling up a seat for this one! Be aware that the cowl needs a little bit of effort and the rivet detail on the rudder isn't to everyone's taste ( I elected to remove it on my build!). Are you going with the kit decals/schemes? Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 12, 2021 Author Share Posted February 12, 2021 @wellsprop I know the cowl is a pig, got my reference builds handy when I get to that part. But, so far none of the problems reported when this kit hit the shelves. Tailplane not short molded. Panel lines equal on both fuselage halves (usual Airfix depth though, but I'm okay with that). The rudder pedals were a bit of a blob though, but PE sorted that out plus it's not easily visible. Yup, kit markings, the 801 Naval Air Squadron on HMS Glory. Getting aftermarket down this end isn't the easiest and cheapest way to spend ones time and money, so AM decals are very low on the list. On the up side, we don't get the first batch on release here in the ex-colonies(case in point, the new Buccaneer only got here end last year) so hopefully some of the early problems get solved by the time we get our paws on them. 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 13, 2021 Author Share Posted February 13, 2021 Been messing around with non PE related stuff today, getting ready for priming internals etc. Ran into a problem, the 20mm Hispano barrels were a tad deformed. So had to come up a solution from my limited supplies. Used hypodermic needles for new ones, cut down with my Dremel. Before: After: Not great from my side, but not wonky either. 5 Link to comment Share on other sites More sharing options...
bigbadbadge Posted February 13, 2021 Share Posted February 13, 2021 Can I pull up a chair. Lovely machine and will like to see how this goes together. I have just got the Frog 72nd Sea Fury to do . Great start with the PE and what a shame about the Canons, great solution too. Chris 1 Link to comment Share on other sites More sharing options...
Gatesy64 Posted February 13, 2021 Share Posted February 13, 2021 Looking forward to this build. I have built one on as Carmichael’s plane but have another I want to detail up. 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 13, 2021 Author Share Posted February 13, 2021 The PE application continues. Cockpit tub and rear bulkhead done with all the PE thats unpainted. Took some liberty with the seat. The Eduard set contains a PE seat, but the kits seat has some lovely molded detail, so I split the difference and kept the kit seat and added the PE around the plastic seat. Hope it will look okay at the end! No, onto the sidewalls..... 6 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 14, 2021 Author Share Posted February 14, 2021 And sidewalls done, most of the PE is colored so will be going on last, was not expecting this! Got the gunsight built up too, no idea why Airfix forgot to put one in, guessing the restored Yeovilton one doesn'thaveone and it slipped through the R&D cracks? Unfortunately primed and got first layer of black down so it looks a bit boring. State of play as of now. Now to get the Hawker yellow primer (called out as Humbrol 74) done. Won't be getting a tin of mystery gloop to do it, so will play around with some VMA 71.107 US interior yellow and either Sky (71.302) or Curtiss Grey (71.296) until I come up with something that might reasonably look close. 3 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 14, 2021 Author Share Posted February 14, 2021 Got quite bit done today. - Hawker yellow bits were done with VMA US interior yellow and Curtiss Grey, no set ratio, just played around. Probably hopelessly inaccurate, so hate mail on a post card please! - Metallic parts (cockpit firewall, wing duct and filter) done in Vallejo Metal Color Semi Matt Aluminium (77.716). - Cockpit was a toughy. It's always a pain in the derriere to make black not only interesting, but less toy like than using straight black. So, used VMA RLM 66 (71.055) as basecoat, then added incremental drops of Neutral Gray (71.051) to try highlight. Seat done in VMC Khaki (70.988). Need to check pics for what, if any, bits and bobs need to be picked out in not-black. 5 Link to comment Share on other sites More sharing options...
David H Posted February 14, 2021 Share Posted February 14, 2021 (edited) 8 hours ago, Evil_Toast_RSA said: And sidewalls done, most of the PE is colored so will be going on last, was not expecting this! Got the gunsight built up too, no idea why Airfix forgot to put one in, guessing the restored Yeovilton one doesn'thaveone and it slipped through the R&D cracks? Unfortunately primed and got first layer of black down so it looks a bit boring. State of play as of now. Now to get the Hawker yellow primer (called out as Humbrol 74) done. Won't be getting a tin of mystery gloop to do it, so will play around with some VMA 71.107 US interior yellow and either Sky (71.302) or Curtiss Grey (71.296) until I come up with something that might reasonably look close. i don't know if this is a useful data point or not, but i made a primer by tinting Tamiya White Surface Primer (square bottle) with Tamiya Yellow Green. I think it would also work by adding Mr Color Yellow Green to their Base White 1000. In fact it might work better, because the Tamiya primer went on a bit rough around the wing root...and it required a bit of sanding to smooth out. Mr Base White seems to go on smoother. Just in case you were curious. -d- Edited February 14, 2021 by David H 1 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 14, 2021 Author Share Posted February 14, 2021 @David H that looks much better than my attempt, will probably try that tomorrow, sure Tamiya XF-2 will make a suitable replacement for the white primer? Link to comment Share on other sites More sharing options...
David H Posted February 14, 2021 Share Posted February 14, 2021 32 minutes ago, Evil_Toast_RSA said: @David H that looks much better than my attempt, will probably try that tomorrow, sure Tamiya XF-2 will make a suitable replacement for the white primer? Not sure, because of its sanding properties. Plain Tamiya will probably scratch off the model if you try to sand it.....but i'm sure it has finer grain, too. -d- Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 17, 2021 Author Share Posted February 17, 2021 Not a thrilling update, just a lot of part prep and getting the internals ready for a oil wash. However, it wouldn't be an Airfix kit without some or other mould problem. That is the rear cowling ring that the exhausts attach too. Are those meant to be raised rivets with some or other detail on it, like a reinforcing plate type thing? A slight faux pas and should be smooth? Answers on a postcard please.... Link to comment Share on other sites More sharing options...
Biggles87 Posted February 17, 2021 Share Posted February 17, 2021 You've made a promising start, I'll pull up a chair if I may. John 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 20, 2021 Author Share Posted February 20, 2021 Done the oil wash on the wheel bay and cockpit Thursday eve, so waiting for that to dry for a few days before I proceed (tomorrow?). Been playing with other sub-assemblies. Tackled the problem child known as "engine cowling". It looks as though the side parts (A 2 & 3) are too small by a few millimeters. So, didn't follow the instructions which call for them to be joined together before attaching the engine front and exhaust ring parts. Been reading up on this, and the internet hive mind suggests the following. Attached A 2 & 3 to the engine front part separately. That particular part (A 3?) was the worst fitting of the two, it seems to have tried to straighten out after being molded. Some TLC using plenty of MEK and brute force got it aligned to the curve. Attached the other parts and voila. Not exactly pretty but no proud parts to sand down and ruin the shape, will fill the gaps with bits of strip styrene. 6 Link to comment Share on other sites More sharing options...
bigbadbadge Posted February 20, 2021 Share Posted February 20, 2021 That's a tidy bit of work on the cowling, especially after what your photo showed further up. Great work. Chris Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 23, 2021 Author Share Posted February 23, 2021 Cockpit finally done. Sadly some of the parts didn't make it (folding tiny PE pieces gives me the squirts) and one or two parts are a bit wonky. But its done! 6 Link to comment Share on other sites More sharing options...
Biggles87 Posted February 23, 2021 Share Posted February 23, 2021 Looks good to me. As I mentioned in another thread, my approach to tiny PE parts is to not use them. John 1 4 Link to comment Share on other sites More sharing options...
wellsprop Posted February 23, 2021 Share Posted February 23, 2021 You're a brave man for tackling that cowl! I gave up and bought a barracuda resin replacement! 1 Link to comment Share on other sites More sharing options...
Hal LH Posted February 23, 2021 Share Posted February 23, 2021 Will be watching this one , hopefully inspire me to get going on with my one, when I've finished my 190D multi build.! I'd already wimped out of tackling the cowling, and got one from Ali, ( actually I think I may have got both, Barracudas as well ) Anyway , Huzzah, Glad to see someone else is enjoying "The Great". 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted February 26, 2021 Author Share Posted February 26, 2021 (edited) Things progressed relatively smoothly this week. There seems to be a slight mould mismatch on the outer wing parts. A slight difference in size that causes the ailerons to not fit very well. Some scraping/sanding/[insert preferred poison here] will sort that out. Otherwise, got cowl sanded and replaced some raised latches I sanded off, as well as some raised panels between the cockpit and cowling, used various strips and sheets of Evergreen. Need to reduce the thickness of 2 of them tomorrow. Otherwise, primed all the other parts to check for issues. Still need to attach some more PE on the fuselage and canopy (shudder...), then starting priming and seeing how many little oopsies I need to fix. Should start applying paint hopefully by Monday, if not earlier, sprog dependant of course 😆! Edited February 26, 2021 by Evil_Toast_RSA Spellingz 10 Link to comment Share on other sites More sharing options...
Biggles87 Posted February 27, 2021 Share Posted February 27, 2021 You've done a great job on the cowling. The whole nose area looks better than the Trumpeter version which just looks wrong to me. John 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now