TEXANTOMCAT Posted July 27, 2021 Share Posted July 27, 2021 My LHS have just called to say mine’s ready for collection TT Link to comment Share on other sites More sharing options...
petetasker Posted July 27, 2021 Share Posted July 27, 2021 Two arrived today in North Cumbria for me. Gutted I can’t get into Wigton until Thursday to collect them. 1 Link to comment Share on other sites More sharing options...
224 Peter Posted July 27, 2021 Share Posted July 27, 2021 And the photographs..... The cockpit and instruments. The seat is a pressed metal bucket for a parachute. This A/C has 4 point belts in black webbing. Conventional instrument pannel, simple enough, no fuel gauges, they are on the upper wing... Magneto switches on the left, the long rod on the right is the flap control lever. Note the padded edge and the sad zipped bag on the RHS wall. This is the fuel filler and gauge. It sits almost 5mm proud of the wing. Note also the fuel tank vent pipe. There is a twin fitting on the other wing. Next the canopy, forst the outside: note the two levers to open and the vent panel in the roof between the clear panels. The same view from the inside.... Note the D handles: the A/C can be flown with the hood open, but is normally flown closed. The yellow levers jettison the hood by releasing the front catches, slipstream does the rest. The canopy slides along the center rail. Time to look at the undercarriage. The wheel has a 4 piston disk brake, the oleo strut has been locked in the "in flight" position, which is wrong for an A/C on the ground. I believe Airfix supply the leg in both positions! Now to the top of the leg.... The landing light is on the Right side only, it is 4" in diameter. The anti spin "Toblerone" ridges are pop riveted on. they don't stop a spn, but make the pre-spin conditions very obvious. The next photo is of the rear fuselage... Note the anti spin strakes and the very obvious aluminium "thing" just in front. I've no idea what it is: Ideas? There seems to be an insulated band about half way up. Now to the front... I was going to show you the engine, but there isn't one.... a structure has been made to hold the prop! Some comments: The wings aft of the main spar and controls are all fabric covered, with zipped access points at various places. The rivets... some are large, others smaller and some pop rivets with a hole in the centre. Anyone feel like drilling those out? The A/C is available for very close inspection, inside and out, at Boscombe Down Aviation Collection. I'm there every Thursday afternoon. Let me know if you need a photo of a particular part! 8 10 Link to comment Share on other sites More sharing options...
Phantom Phil Posted July 27, 2021 Share Posted July 27, 2021 The one fault I coukd find was on the set of undercarriage designed for flight i.e. the oleos are extended... One is missing the lug to attach the main wheel. Definitely looks mis-moulded rather than snapped. I'm not bothered as mine will be on it's undercarriage but even if not, it's easily fixed. Link to comment Share on other sites More sharing options...
wasacop Posted July 28, 2021 Share Posted July 28, 2021 20 hours ago, keithjs said: Anyone got theirs yet who ordered directly from Airfix? Nope!! Still waiting! its been over a week since they took the money! So glad I pre ordered now!! Link to comment Share on other sites More sharing options...
patjb Posted July 28, 2021 Share Posted July 28, 2021 Jadlam are delivering pre orders for receipt tomorrow Link to comment Share on other sites More sharing options...
Stephen Posted July 28, 2021 Share Posted July 28, 2021 I picked up one from my LHS today. Link to comment Share on other sites More sharing options...
Jb65rams Posted July 28, 2021 Share Posted July 28, 2021 Hannants website says they are due in on Friday. Link to comment Share on other sites More sharing options...
TEXANTOMCAT Posted July 28, 2021 Share Posted July 28, 2021 Picked mine up from my LHS today. wow. It is superb. Panel lines much finer than recent releases rivet detail is delicate looks like a quick build. Even has the correct internal windscreen bar as a separate part. The wings are fine! gripes? Well I would have liked the yellow training bands as decals as they did with their Tiger (which were brilliant, they just fell on) and maybe the cowlings are a little thick but otherwise top job. I think Matt Whiting did this - he who did the Blenheim- and you can tell IMHO the best 1/48 surface detail since the late 90s Seafire they deserve to sell shedloads ATB TT 3 1 Link to comment Share on other sites More sharing options...
224 Peter Posted July 28, 2021 Share Posted July 28, 2021 Still waiting for mine from Airfix.... They took money on 21 July, the order status is shown as "Pending"!! I have just got my "Kits World" cockpit panels and seat belts, plus "seat cushions". It will be interesting to see if Airfix has got the parachute style sets right. No cushions on RAF marked aircraft. Link to comment Share on other sites More sharing options...
Black Knight Posted July 28, 2021 Share Posted July 28, 2021 Mine has been sent out from Airfix a few days ago but it'll be delayed by about a week due to the UK Internal Customs my parcels now have to come and go through Link to comment Share on other sites More sharing options...
Black Knight Posted July 28, 2021 Share Posted July 28, 2021 On 27/07/2021 at 18:43, 224 Peter said: Note the anti spin strakes and the very obvious aluminium "thing" just in front. I've no idea what it is: Ideas? There seems to be an insulated band about half way up. Its called a 'blade' aerial Link to comment Share on other sites More sharing options...
TEXANTOMCAT Posted July 28, 2021 Share Posted July 28, 2021 1 hour ago, 224 Peter said: Still waiting for mine from Airfix.... They took money on 21 July, the order status is shown as "Pending"!! I have just got my "Kits World" cockpit panels and seat belts, plus "seat cushions". It will be interesting to see if Airfix has got the parachute style sets right. No cushions on RAF marked aircraft. Seat cushions are optional in the kit and marked only for use on restored aircraft kit option 1 Link to comment Share on other sites More sharing options...
Des Posted July 28, 2021 Share Posted July 28, 2021 2 hours ago, Black Knight said: Mine has been sent out from Airfix a few days ago but it'll be delayed by about a week due to the UK Internal Customs my parcels now have to come and go through Can't quite get my head round our brave new 2021 re-definition of nation-state but will you get hit for any form of tax/duty/handling fee? Link to comment Share on other sites More sharing options...
Black Knight Posted July 28, 2021 Share Posted July 28, 2021 Shouldn't. I got an order from Airfix delivered today - no charges applied. But it was delayed by an extra 4 or 5 days, was due about 22nd, arrived 28th 1 Link to comment Share on other sites More sharing options...
theplasticsurgeon Posted July 29, 2021 Share Posted July 29, 2021 On 7/27/2021 at 8:01 PM, Phantom Phil said: The one fault I coukd find was on the set of undercarriage designed for flight i.e. the oleos are extended... One is missing the lug to attach the main wheel. Definitely looks mis-moulded rather than snapped. I'm not bothered as mine will be on it's undercarriage but even if not, it's easily fixed. Looking at the instructions, 2 set of legs. Compressed oleos for on the ground, and extended for in the air. But if your kit is mis-moulded - return it to vendor for exchange. Link to comment Share on other sites More sharing options...
224 Peter Posted July 29, 2021 Share Posted July 29, 2021 (edited) Still no kit.... Edited July 29, 2021 by 224 Peter 1 Link to comment Share on other sites More sharing options...
tonyh Posted July 29, 2021 Share Posted July 29, 2021 Mine should have been delivered today, but Royal Mail mis-routed it and now I have no idea where it is. i hope they know..... 1 Link to comment Share on other sites More sharing options...
Rick Brown Posted July 29, 2021 Share Posted July 29, 2021 Mine was on the mat when I got home! Thanks Jadlam! Rick. 1 Link to comment Share on other sites More sharing options...
Jon Bryon Posted July 29, 2021 Share Posted July 29, 2021 Picked mine up today from Roxley Models near Leatherhead. Very nice, but the clear parts are quite poorly moulded with lots and lots of distortion. Is this a widespread problem or are other people's ok? Jon Link to comment Share on other sites More sharing options...
dnl42 Posted July 29, 2021 Share Posted July 29, 2021 18 minutes ago, tonyh said: Mine should have been delivered today, but Royal Mail mis-routed it and now I have no idea where it is. i hope they know..... Hm, perhaps they're taking lessons from the US Postal Service, who favor nationwide tours of late, even when the origin and destination counties are adjacent. 1 Link to comment Share on other sites More sharing options...
224 Peter Posted July 29, 2021 Share Posted July 29, 2021 4 minutes ago, Jon Bryon said: Picked mine up today from Roxley Models near Leatherhead. Very nice, but the clear parts are quite poorly moulded with lots and lots of distortion. Is this a widespread problem or are other people's ok? Jon Then they are good representations of our original! The front screens are good and clear, but the sides are somewhat distorted and wavy.... I'll grab a photo from the inside through the side.... 1 Link to comment Share on other sites More sharing options...
Rick Brown Posted July 29, 2021 Share Posted July 29, 2021 6 minutes ago, Jon Bryon said: Picked mine up today from Roxley Models near Leatherhead. Very nice, but the clear parts are quite poorly moulded with lots and lots of distortion. Is this a widespread problem or are other people's ok? Jon Mine look fine, but there's a small crack on one of the side panels. Hmmm. I may try for a replacement, but it'll probably disappear under some Klear. Rick. 1 Link to comment Share on other sites More sharing options...
Jon Bryon Posted July 29, 2021 Share Posted July 29, 2021 Thanks. Since it's the front and rear windscreens that are particularly distorted, I'll request a new sprue. I think Airfix do need to be held to account for their poor QC. These issues have persisted for years and I don't know why they haven't switched to a better quality source for their injection moulding. Jon 3 Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted July 29, 2021 Share Posted July 29, 2021 1 hour ago, dnl42 said: Hm, perhaps they're taking lessons from the US Postal Service, who favor nationwide tours of late, even when the origin and destination counties are adjacent. Oh have you been here… The U.S.Postal system definitely stinks. My carrier wears Pajama’s on her route. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now