occa Posted January 7, 2021 Share Posted January 7, 2021 You can bet that Airfix will release the PR version at some time, why would they miss that opportunity, it doesn't need many alternative parts. If SH and or AZ/KP release it too it will be a waste of efforts IMO. 1 Link to comment Share on other sites More sharing options...
VMA131Marine Posted January 7, 2021 Share Posted January 7, 2021 59 minutes ago, occa said: You can bet that Airfix will release the PR version at some time, why would they miss that opportunity, it doesn't need many alternative parts. If SH and or AZ/KP release it too it will be a waste of efforts IMO. There are enough differences between the fighter and bomber variants of the Mosquito to think that the Airfix kit will only cover the bomber and, perhaps, PR versions. That leaves and opening for SH and AZ to do the fighter versions and the aircraft with single-stage Merlins. A Sea Mosquito TR.33 would be nice too. 2 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted January 8, 2021 Share Posted January 8, 2021 1 hour ago, VMA131Marine said: There are enough differences between the fighter and bomber variants of the Mosquito to think that the Airfix kit will only cover the bomber and, perhaps, PR versions. That leaves and opening for SH and AZ to do the fighter versions and the aircraft with single-stage Merlins. A Sea Mosquito TR.33 would be nice too. One would think Airfix will try to maximise their investment by doing as many two stage versions as possible. We may be able to investigate this once we see the kit sprues, however I’d bet / hope that Airfix will grace us with the various Fighter versions as time goes on. Cheers.. Dave 1 Link to comment Share on other sites More sharing options...
VMA131Marine Posted January 8, 2021 Share Posted January 8, 2021 10 minutes ago, Rabbit Leader said: One would think Airfix will try to maximise their investment by doing as many two stage versions as possible. We may be able to investigate this once we see the kit sprues, however I’d bet / hope that Airfix will grace us with the various Fighter versions as time goes on. Cheers.. Dave It’s difficult to tell, but the CAD does not appear to show the Airfix fuselage having a fuselage break to allow for an alternate fighter nose. Fighters had the flat windscreen and side entry door in addition to the gun nose and cannon ports (the reason why the door had to be relocated). Without the nose break, Airfix would have to tool up two sets of fuselage halves to accommodate bomber and fighter variants, plus all the alternate cockpit parts and canopies. I’m not saying it’s not possible, just not likely based on past history. I think it’s more likely that they would tool up single stage engine nacelles so the B.IV would be possible. 3 Link to comment Share on other sites More sharing options...
Max Headroom Posted January 8, 2021 Share Posted January 8, 2021 I still haven’t seen anything of the 3D renders because the Airfix site is always unavailable (it’s now offline again) so could some kind soul post up pics please?! Trevor 1 Link to comment Share on other sites More sharing options...
TEMPESTMK5 Posted January 8, 2021 Share Posted January 8, 2021 Good morning I really hope that it will be possible to build the PR version because I'm not a big fan of this Bomber version with its big bulged bomb bay .. Patrice Link to comment Share on other sites More sharing options...
TEMPESTMK5 Posted January 8, 2021 Share Posted January 8, 2021 58 minutes ago, Max Headroom said: I still haven’t seen anything of the 3D renders because the Airfix site is always unavailable (it’s now offline again) so could some kind soul post up pics please?! Trevor Good morning Trevor https://www.airfix.com/uk-en/shop/new-for-2021/de-havilland-mosquito.html Patrice 4 1 Link to comment Share on other sites More sharing options...
dalea Posted January 8, 2021 Share Posted January 8, 2021 Not many aftermarket decals for 2 stage Merlin Mosquitos. Can't possibly sell well. Link to comment Share on other sites More sharing options...
alt-92 Posted January 8, 2021 Share Posted January 8, 2021 Plenty of time ahead for AM decals. Not worried. 1 Link to comment Share on other sites More sharing options...
Max Headroom Posted January 8, 2021 Share Posted January 8, 2021 Thanks @TEMPESTMK5 👍🏻 That looks very nice indeed. I’m a happy bunny. Trevor 1 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted January 8, 2021 Share Posted January 8, 2021 I can foresee one concise decal sheet with representative options for all of the LNSF squadrons. The sad fact is that someone as stupid as me will then develop plans to build all of them! Cheers.. Dave 7 5 Link to comment Share on other sites More sharing options...
Paul Thompson Posted January 8, 2021 Share Posted January 8, 2021 (edited) 12 hours ago, VMA131Marine said: At least it will be possible to build the Airfix Beaufort and it will be generally accurate. There are nightmare stories on the internet by people who have tried to assemble the SH kit. I wouldn't believe everything you read. I built it when it came out along with a High Planes and an old Frog kit, and it posed no special problems for a limited run kit. Since then, the standard of Special Hobby kits has improved a lot. Accuracy is a different matter, because it wasn't (no point asking me what was wrong though - as is usual I learn as much as I can before building something then forget everything I did as a result once finished, although the old thinky bits usually retain a good record of the construction experience in terms of fun or not). That said, I'll have at least one Airfix kit anyway. Paul. Edited January 8, 2021 by Paul Thompson Posting doubled up for some reason. 3 Link to comment Share on other sites More sharing options...
Andre B Posted January 8, 2021 Share Posted January 8, 2021 2 hours ago, dalea said: Not many aftermarket decals for 2 stage Merlin Mosquitos. Can't possibly sell well. If you build them they will come... 5 Link to comment Share on other sites More sharing options...
Jamie @ Sovereign Hobbies Posted January 8, 2021 Share Posted January 8, 2021 As per the thread in chat, I do hope it's a graphics error on the boxart and markings because the canopy shown on those is suitable for earlier bombers, not the B.XVI and later. The 3D model renders aren't quite clear enough to see if they have the correct blown side windows or not. The escape hatch with the astrodome was used on the PRs and B.35 rather than the B.XVI but the blown side windows were common to all the glass-nosed types with pressurised cockpits. The teardrop blisters shown on the box art and markings graphics were used on unpressurised B.IV, PR.IV and B.IX models. Indeed ML963 - the famous 8K-K featured on the markings graphics clearly shows the later blown side windows. However, I reiterate that we haven't seen the sprues yet and the 3D model renders appear inconclusive. It would be a great move by Airfix to include 3 canopies on the clear runner allowing a lot of reboxing potential for the tooling. 7 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted January 8, 2021 Share Posted January 8, 2021 Airfix tend to be good for providing a multitude of canopies on their clear sprues, so perhaps the builder used the earlier (Mk. IX) canopy instead of the correct blown sided (Mk.XIV) type - my thoughts only as I haven’t seen the sprues either! Cheers.. Dave Link to comment Share on other sites More sharing options...
IanC Posted January 8, 2021 Share Posted January 8, 2021 Silly question maybe, but they WILL provide a 'cookie' - it being the obvious load for one of these? Or are they anticipating increased sales of the Bomber Re-Supply set? 😄 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted January 8, 2021 Share Posted January 8, 2021 2 minutes ago, IanC said: Or are they anticipating increased sales of the Bomber Support set? Now there’s an idea.. release certain items found within the Bomber Supply set (Cookie, trolley and perhaps tractor) and release a special edition LNSF boxed Gift Set with new decals? There’s another boxing that might tempt additional sales?? Cheers.. Dave 6 Link to comment Share on other sites More sharing options...
Meatbox8 Posted January 8, 2021 Share Posted January 8, 2021 12 hours ago, VMA131Marine said: There are enough differences between the fighter and bomber variants of the Mosquito to think that the Airfix kit will only cover the bomber and, perhaps, PR versions. That leaves and opening for SH and AZ to do the fighter versions and the aircraft with single-stage Merlins. A Sea Mosquito TR.33 would be nice too. I was taking a look at the CAD pictures of the Mosquito on the Airfix site and it doesn't appear to show the nose and cockpit as a separate sub-assembly, not that that is proof of anything of course, but I reckon you are right. Having said that I wouldn't be surprised if some enterprising after-market company produced a cockpit and nose conversion set, especially if the SH kit is not forthcoming. Then again, if the bomb bay structure is integral to the build, rather than designed with a standard bomb bay also possible, it would be quite a major conversion. All complete specualtion on my part, of course. 1 Link to comment Share on other sites More sharing options...
IanC Posted January 8, 2021 Share Posted January 8, 2021 12 minutes ago, Rabbit Leader said: Now there’s an idea.. release certain items found within the Bomber Supply set (Cookie, trolley and perhaps tractor) and release a special edition LNSF boxed Gift Set with new decals? There’s another boxing that might tempt additional sales?? Cheers.. Dave And here it is: Wrong mark tho.. 5 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted January 8, 2021 Share Posted January 8, 2021 Looks like a Mk.IV with bulged bomb bay there @IanC. Nice photo all the same. edit - just saw your notes below the photo! Sorry bout that. 2 Link to comment Share on other sites More sharing options...
IanC Posted January 8, 2021 Share Posted January 8, 2021 32 minutes ago, Rabbit Leader said: Looks like a Mk.IV with bulged bomb bay there @IanC. Nice photo all the same. Yes I realise that. But you get the idea! 😀 2 Link to comment Share on other sites More sharing options...
mouse808 Posted January 8, 2021 Share Posted January 8, 2021 Sorry hope this isn't a daft question, but how come the price difference? (I headed straight over to Airfix to pre-order, then noticed the link on scalemates when I marked it as on order) Airfix website £22.99 jadlam £18.95 I know its only a few quid. Link to comment Share on other sites More sharing options...
Dave Swindell Posted January 8, 2021 Share Posted January 8, 2021 1 hour ago, Jamie @ Sovereign Hobbies said: As per the thread in chat, I do hope it's a graphics error on the boxart and markings because the canopy shown on those is suitable for earlier bombers, not the B.XVI and later. The 3D model renders aren't quite clear enough to see if they have the correct blown side windows or not. I'd be cautiously optimistic at the moment that the blisters on the artwork is an error, and that the 3d printed test model and released CAD images are hinting at either in box options or possible different variant releases. Airfix have said that the Cosford TT35 (currently masquerading as a bomber) was lidar'd and the results used in designing the kit. This aircraft is fitted with blown side windows and an escape hatch blister. The 3d printed test model shown on the youtube release video has the upper blister and the side panels are moulded as separate parts as per the Tamiya kit, it's not clear whether these are blown or blister type. The CAD renders show no upper blister, and side blisters, so hopefully the parts have been designed for both types of side panel and both types of escape hatch/main canopy. The CAD renders also show a late type landing light in the stbd wing leading edge as well as the normal underwing retractable lamps, and also the TT35 bomb doors and cut back rear bomb bay fairing, these are also shown on the colour scheme illustrations. Hopefully plain doors and fairings have also been designed for the BXVI and we're seeing hints of a later TT35 release. There's, what appears to be a rear PR variant fuselage camera port. The carburettor intakes are separate parts so possibility of tropical intakes as an option The elevator horn balances look to be standard size, no enlarged ones shown for late PR and Cookie bombers (small additional tooling to include?) No single stage engines indicated (possible future release? depending on tooling parts layout) No indication of PR bomb bay bulge options (small additional tooling to include?) No indication of Fighter nose variants, would need new fuselage and cockpit tooling, so unlikely (but would be more than happy to be proved wrong!) The radio fit seems a bit confused, with a T1154 set on the rear shelf appropriate for an early BIV (but no R1155) and the type 62 Gee indicator behind the pilot appropriate for the BXVI, but not the receiver and other associated boxes that sat on the rear shelf behind it. I think we can look forward to various two stage bomber nose version boxings of this in the future, and possibly single stage bomber nose versions as well, but I'd say any fighter nose versions are unlikely. 3 Link to comment Share on other sites More sharing options...
Work In Progress Posted January 8, 2021 Share Posted January 8, 2021 40 minutes ago, mouse808 said: Sorry hope this isn't a daft question, but how come the price difference? (I headed straight over to Airfix to pre-order, then noticed the link on scalemates when I marked it as on order) Airfix website £22.99 jadlam £18.95 I know its only a few quid. You do realise that any attempts by manufacturers to dictate the prices charged by retaileers are illegal, don't you? Retailers can sell at any margin they want to sell at. 3 Link to comment Share on other sites More sharing options...
fishplanebeer Posted January 9, 2021 Share Posted January 9, 2021 Just £17.99 at Hannants if you pre-order, which I just have along with the new Tempest V and Wellington II. Hope they get them a wee bit more promptly from Airfix than the recent Spit Vc mind, but there again I'm happy to wait a little longer if that's the case. Regards Colin. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now