thekz Posted May 31, 2021 Author Share Posted May 31, 2021 6 minutes ago, ArnoldAmbrose said: Gidday Thekz, that's an excellent 'heavy weather' sea, and it looks like the ship has had a hard time of it. I pity the crew when they next reach harbour, all that rust chipping and painting the Buffer will have them doing. Regards, Jeff. Gidday, This is the impression I sought😊 I think you've seen a lot of real photos with much larger waves. HMS Renown, as say, overflowed to the funnels) Link to comment Share on other sites More sharing options...
thekz Posted June 17, 2021 Author Share Posted June 17, 2021 Hello gentlemen! It's time for the next photo report. Now work is underway on the main superstructure and the captain's bridge. Since there are no detailed blueprints for Berwick yet, I dare to point out for the future Berwick-builders the main differences between the Berwick superstructure (in the 1940 configuration) and Cornwall (according to Trumpeter's version). I note here only those differences that are clearly visible in the photos and do not cause me any doubts. 1. Straight front wall of the bridge 2. Solid, not railing, second-level fencing. (The rail saved here will be used - around the rear pair of 4 inch AA guns, the reverse operation must be carried out - to replace the solid fence with a rail.) 3. Elongated fencing of pom-pom positions. 4. Only one signal locker on each side. Presumably, another pair is at the base of the mast across. 5. As in other places - a different type of doors And these are modified and homebaked accessories for the bridge I also worked a little with the water surface. In addition to the techniques described in the last post, I also added foam from a mixture of soda and PVA. This made it possible to diversify the texture. Recommend. And a few more coats of glossy two-component varnish Thanks for attention 13 Link to comment Share on other sites More sharing options...
robgizlu Posted June 20, 2021 Share Posted June 20, 2021 Great detailing as ever, the bridge looks superb Rob 1 Link to comment Share on other sites More sharing options...
olavhome@online,no Posted June 21, 2021 Share Posted June 21, 2021 Im impressed about how you can glue all the tiny details. Personally i feel the glue always stick to my fingers and tools, making a solid mess 🙂 Maybe the superglue i use is to thinflowing, combined with my own techique and eyesight... Link to comment Share on other sites More sharing options...
mick Posted June 21, 2021 Share Posted June 21, 2021 great work 1 Link to comment Share on other sites More sharing options...
thekz Posted June 21, 2021 Author Share Posted June 21, 2021 (edited) 3 hours ago, olavhome@online,no said: Im impressed about how you can glue all the tiny details. Personally i feel the glue always stick to my fingers and tools, making a solid mess 🙂 Maybe the superglue i use is to thinflowing, combined with my own techique and eyesight... polystyrene parts I glue with super liquid glue like this it should spread over the entire surface - it does not spoil it. As for the superglue, strangely enough it is easier to work with the thick version that has the word "gel" on it. It's not about the manufacturer. I am now using a very cheap Chinese from Ashan. pour out a small drop of this gel onto an unnecessary piece of plastic and either directly dip the parts into it or pick up with a toothpick. liquid superglue is actually harder to work with. but you can get used to good luck Edited June 21, 2021 by thekz 2 1 Link to comment Share on other sites More sharing options...
Chewbacca Posted June 27, 2021 Share Posted June 27, 2021 Great work coming along here. I must confess that when I saw the first image of here bow being so far out of the water I thought that you had perhaps overdone it - after all she is a 10,000 ton cruiser not a 1,000 ton frigate, but after the addition of the foam it's looking pretty good. By the way, you mention a product called synthep. Can you elaborate on what that is as a Google search came up with nothing? Is it a form of cotton wool? 1 Link to comment Share on other sites More sharing options...
thekz Posted June 29, 2021 Author Share Posted June 29, 2021 On 27/06/2021 at 23:27, Chewbacca said: By the way, you mention a product called synthep. Can you elaborate on what that is as a Google search came up with nothing? Is it a form of cotton wool? You probably call this material by a different word. This is a synthetic wadding that is used as insulation for winter clothing. Cotton wool is likely to work with this method. 1 Link to comment Share on other sites More sharing options...
Chewbacca Posted June 30, 2021 Share Posted June 30, 2021 Thanks Link to comment Share on other sites More sharing options...
thekz Posted July 14, 2021 Author Share Posted July 14, 2021 In spite of the heat, despondency and the European Football Championship, my Berwick continues to grow in details) 8 Link to comment Share on other sites More sharing options...
thekz Posted August 10, 2021 Author Share Posted August 10, 2021 (edited) Hello, guys! In past projects I have had difficulties with plastic spars. The rods and mast tops on Trumpeter`s models are very flexible and brittle. Not to mention the risk of breaking them, they lose their shape when the rigging is stretched. Berwick's thin masts were frightening to look at already on the sprues! Especially in the kit the mainsail was without maintopmast, so the question arose - what to make a spar out of? I chose bamboo toothpicks. Here's what came out: Unfortunately, I didn't have many photos of the maintopmast. I made a seaman on battens to liven it up (yes, it's a seaman, not Winnie the Pooh or Kungfu Panda) The foremast is a little better documented, and will hopefully be an ornament to the finished model. Winnie the Pooh in this case climbed into the crow's nest. Of course, to finally understand whether the material for the spar is successful or not will be possible much later, when I pull the rigging. And these are the hand-finished artellery directors and anti-aircraft machine guns: More later) Edited August 10, 2021 by thekz 7 Link to comment Share on other sites More sharing options...
ArnoldAmbrose Posted August 10, 2021 Share Posted August 10, 2021 Gidday Thekz, good to see you back. You've done some very nice detail there. Regards, Jeff. Link to comment Share on other sites More sharing options...
S-boat 55 Posted August 10, 2021 Share Posted August 10, 2021 That's very impressive 1 Link to comment Share on other sites More sharing options...
thekz Posted August 10, 2021 Author Share Posted August 10, 2021 27 minutes ago, ArnoldAmbrose said: Gidday Thekz, good to see you back. You've done some very nice detail there. Regards, Jeff. Thank you, Jeff. I haven't actually stopped my work on Berwick for a day. But my poor English and introverted temperament prevents me from writing often 1 Link to comment Share on other sites More sharing options...
ArnoldAmbrose Posted August 10, 2021 Share Posted August 10, 2021 Gidday again, I think your English is very good. As an Australian my English is probably not as good as yours. 🙂 And it's the only language I speak. As for introverted, I think that's my middle name. I'm looking forward to seeing more of your progress. I've only ever done one of this class of cruiser, an Airfix 1/600 HMS Suffolk OOB, but I'd like to do more, HMAS Australia for one. It will still be an Airfix 1/600 but I'll get a lot of tips from the other members' builds here, yours too if I may. But this will be in the future. Those directors you've done, and the quad machine guns are exquisite. Regards, Jeff. 1 Link to comment Share on other sites More sharing options...
Adm Lord De Univers Posted August 10, 2021 Share Posted August 10, 2021 4 hours ago, ArnoldAmbrose said: Those directors you've done, and the quad machine guns are exquisite Seconded, I think, I've yet to run Jeff's post through my Aussie-English translator. And Thekz, your english is perfect, definitely better than most native speakers, myself included, and I wouldn't have guessed it wasn't your first language. More please. David 1 Link to comment Share on other sites More sharing options...
thekz Posted August 10, 2021 Author Share Posted August 10, 2021 3 minutes ago, Adm Lord De Univers said: Seconded, I think, I've yet to run Jeff's post through my Aussie-English translator. And Thekz, your english is perfect, definitely better than most native speakers, myself included, and I wouldn't have guessed it wasn't your first language. More please. David it's really weird for me to read this. Indeed, I studied English at school and university (during the Soviet Union, when English teachers were not able to communicate with native speakers). Then I didn't practice English for many years and now I use auto-translation software to write all my sweats, substituting only specific navy vocabulary. Your compliments should be redirected to the makers of these software! Translated with www.DeepL.com/Translator (free version) 1 Link to comment Share on other sites More sharing options...
Maginot Posted August 14, 2021 Share Posted August 14, 2021 This is a mighty project. Very impressed with your dedication to documenting the build and translating your copy. But a little scared that the resultant text is the work of a set of algorithms. Yikes! We are the slaves of the machines. 1 Link to comment Share on other sites More sharing options...
thekz Posted September 13, 2021 Author Share Posted September 13, 2021 Hi guys! Big news from my home yard! The masts are painted and in place. Most of the rigging has been stretched. More and more self-made sailors in jackets are taking up their posts. A little-noticed, but psychologically very important milestone has been overcome - the leers on the lower level of the superstructure. The fact is that the shape of this level is the main difference between the Berwick and the Cornwall, and therefore it was impossible to do without leers from the kit. I had to apply inquisitorial methods to them And here's the homebaked Micro Master! Two of the four 8" turrets have been refinished. Of course, the Micro Master has smaller rivets and tidier parts, but the pleasure of doing it all yourself is incomparable! IMHO I still miss the splash in the bow. Added more but it's not over yet) Thanks to everyone who reads me 9 Link to comment Share on other sites More sharing options...
S-boat 55 Posted September 13, 2021 Share Posted September 13, 2021 Looking mighty impressive it must be said 1 Link to comment Share on other sites More sharing options...
ArnoldAmbrose Posted September 13, 2021 Share Posted September 13, 2021 3 hours ago, thekz said: but the pleasure of doing it all yourself is incomparable! IMHO Gidday Thekz, I enjoy making some parts also. Mine aren't as good as AM stuff, but it's what I enjoy doing. Your model of HMS Berwick is coming along very well. I think when the ship finally reaches port the crew are going to be rather busy with chipping hammers and paint pots - all that rust! 😩 Regards, Jeff. 🙂 1 1 Link to comment Share on other sites More sharing options...
thekz Posted September 13, 2021 Author Share Posted September 13, 2021 2 hours ago, ArnoldAmbrose said: Gidday Thekz, I enjoy making some parts also. Mine aren't as good as AM stuff, but it's what I enjoy doing. You just have a much smaller scale. I built one model in 1/700. I'm not doing it again. 1 Link to comment Share on other sites More sharing options...
Adm Lord De Univers Posted September 13, 2021 Share Posted September 13, 2021 That looks absolutely stunning. My favourite bit so far is the canvass on that boat, again stunning work. I do hope the Admiralty has enough paint in stock for when shes back in dock. David 1 1 Link to comment Share on other sites More sharing options...
Faraway Posted September 13, 2021 Share Posted September 13, 2021 I look at what you have achieved, and I am truly in awe. Your self carved crew are amazing, but your wave splashes are so realistic. How on earth do you do it ? You have a gift, plain and simple. Jon 1 Link to comment Share on other sites More sharing options...
thekz Posted September 13, 2021 Author Share Posted September 13, 2021 3 hours ago, Faraway said: I look at what you have achieved, and I am truly in awe. Your self carved crew are amazing, but your wave splashes are so realistic. How on earth do you do it ? You have a gift, plain and simple. Jon If there is a secret, it is that I try to take my time. In those moments when I want to finish and start another project as soon as possible, I tell myself that the same technological operations are waiting for me there. I have a very modest budget for modelling, so I have to make many of the details myself.😔 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now