Jump to content

Falmouth Quay Punt


Recommended Posts

Continuing with a local history lesson....

In days of yore before the widespread use of wireless telegraphy. Vessels sailing from far off parts would have instructions to make for Falmouth or Queenstown for orders. The cargo may well have changed hands many times on the long passage home.

 

Out of this grew a fleet of service boats based at Falmouth Quay. They were traditionally yawl rigged with a low main mast and a high set gaff, to save them from fouling the rigging of the sailing boats they were going alongside..Not only did they pass sailing orders but transferred personel , fresh produce etc etc. 

 

Falmouth Quay

 

Capture

 

a

 

HY_018_Yacht_Quay_Punt_in_Falmouth_Harbour_Courtesy_RCPS_No_353

 

4d8513721eb5b1a0e98a8abe1979c1f4

 

AS a base for this I have upcycled a 28' wooden boat I built some time ago. The plan view is good but the draft is not deep enough, not a problem as she will be displayed waterline

P1090860

 

P1090861

 

The first job was to remove tops of the side frames as they were well over scale even for the original model in my opinion. They scaled out at 5 x 4"

P1110633

 

Deck beams added

P1110635

 

P1110634

 

I hope you will join me on this voyage

 

Stay safe

 

Kev

  • Like 26
Link to comment
Share on other sites

Was wondering when you where going to start another build no rust on this one but I can see Gulls on that first photo  :whistle:

 

Nice re-start looking forward to seeing this project develop

 

Stay Safe and Best Wishes

beefy

  • Thanks 1
  • Haha 3
Link to comment
Share on other sites

As I am originally from Falmouth ( not your Falmouth, but the farming community in Nova Scotia, Canada ) I'll be watching this one. 

 

During his time in the RCN during WW2 and serving on a destroyer escort, my Dad was in your Falmouth a couple times.

 

 

 

 

Chris

  • Like 2
Link to comment
Share on other sites

Nice subject Kev, I'm settling in. :popcorn:

 

I know Falmouth, over the years I have done a lot of bunkering with the ship I was sailing on at the time, in this place which is very similar to the area opposite where I live in France, near the sea.

 

I had been able to take pictures of old sailing ships that were dredging oysters under sail, it's a tradition even in our time, I found this place very peaceful, I felt a bit at home. We not only bunked heavy fuel oil but also planned some good things coming from nice places, lobster, oysters etc, we were a few days away from Christmas like today.

 

Thank you for reminding me of all this.

 

2004, december.

 

Screenshot-2020-12-21-19-53-12-828.jpg

 

Screenshot-2020-12-21-19-53-32-320.jpg

 

Screenshot-2020-12-21-19-54-00-550.jpg

 

Screenshot-2020-12-21-19-54-41-279.jpg

 

Screenshot-2020-12-21-19-54-59-542.jpg

 

Screenshot-2020-12-21-19-55-42-403.jpg

 

Screenshot-2020-12-21-19-56-23-731.jpg

 

On the way to Norway

 

Screenshot-2020-12-21-19-56-55-900.jpg

 

 

  • Like 11
Link to comment
Share on other sites

An interesting project, I have many ties with Falmouth, walking along the harbour side. My Brother still lives in Falmouth although I havent been down there several years. Looking forward to seeing this progress.

Bob

  • Like 1
Link to comment
Share on other sites

On 21/12/2020 at 09:39, longshanks said:

AS a base for this I have upcycled a 28' wooden boat I built some time ago. 

Ah, recycling & doing your part for the environment.  :yes:

 

Looking forward to following along.  :popcorn:

 

John

  • Like 2
Link to comment
Share on other sites

My first house (while I was based at Culdrose) was between Falmouth & Truro, and I spent many a happy day sailing my Laser in Carrick Roads from Restronguet.  A lovely part of the world.

  • Like 4
Link to comment
Share on other sites

Thank you all for your kind comments, memories and likes. It is indeed a lovely part of the world, similar as @Iceman 29 to Brittany. Both have a wealth of maritime history. The Falmouth Oyster boat is on my to do list as is the sloup Red ar Mar built in Cameret. There are many beautiful boats built in Bretagne.

 

Some progress on the build. The punts were semi decked so I need to make a sub deck for the planking to sit on. Never try to make a template in one piece, that way lies madness

P1110638

 

sub deck

P1110640

 

Cockpit cut out of plastic card base (multi media build 😉)

P1110642

 

Braces added to strengthen deck beams

P1110644

 

Beam centers removed and aft bulkhead fitted. Locker door to be fitted later

P1110646

 

Forward

P1110647

 

Progress to date

P1110650

 

Thanks for stopping by

 

Seasons Greetings to you all

Stay safe

 

Kev

  • Like 20
Link to comment
Share on other sites

7 hours ago, longshanks said:

Thank you all for your kind comments, memories and likes. It is indeed a lovely part of the world, similar as @Iceman 29 to Brittany. Both have a wealth of maritime history. The Falmouth Oyster boat is on my to do list as is the sloup Red ar Mar built in Cameret. There are many beautiful boats built in Bretagne.

 

Kev

 

Probably this one:

 

Red ar Mor:

 

https://translate.google.com/translate?sl=fr&tl=en&u=https://fr.wikipedia.org/wiki/Red_Ar_Mor

  • Thanks 1
Link to comment
Share on other sites

Awesome build Kev. Love seeing scratch built wooden ships. I've always wanted to do one at some point. My wood ships are normally kit form. 

 Your pics of Falmouth are great too, we are there every year (barring this one) always visit the maritime museum. Lunch in the Quayside Inn watching the boats and ships. Even see the same National trust guy at edge of carpark year after year lol

Lovely part of the world (going to live there one day when kids left home)

 

Chris

  • Thanks 1
Link to comment
Share on other sites

@dickrd arrived today, thanks.

 

On 30/12/2020 at 09:51, magpie1832 said:

Your pics of Falmouth are great too, we are there every year (barring this one) always visit the maritime museum. Lunch in the Quayside Inn watching the boats and ships. Even see the same National trust guy at edge of carpark year after year lol

 Ah! The good old days

 

Thanks for the kind comments and likes guys..

Work continues.........

Sub deck fixed

P1110653

 

Cover boards fitted and side rails underway

P1110654

 

Decided to cut the capping rail from sheet material rather than try and bend it. For shaping flimsy pieces I use the following contraption

P1110656

 

Capping rail Fitted, bow area to be sorted in situ

P1110661

 

P1110660

 

P1110659

 

Thanks for looking in

Hope all goes well for you in the New Year

 

Avoid the numpties and stay safe

 

Kev

  • Like 17
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...