Homebee Posted December 14, 2020 Share Posted December 14, 2020 (edited) Source: https://www.facebook.com/ArmaHobby/posts/3803515099678819 Quote Stay tuned! Tomorrow at 12 CET (Polish Time) we will reveal the first 1/48 scale kit from Arma Hobby. Preorders will start then. Forthcoming 1/72 kits will be announced on 30 December. This one? https://www.britmodeller.com/forums/index.php?/topic/235077295-hawker-hurricane-mk-iic-148-arma-hobby/ UPDATE: https://www.armahobby.com/blog/preorders-of-the-1-48-scale-pzl-p-11c.html https://www.armahobby.com/40001-pzl-p-11c-expert-set-1-48.html https://www.facebook.com/ArmaHobby/posts/3805224659507863 1/48th - ref. 40001- Państwowe Zakłady Lotnicze PZL P.11c Quote The 1/48 scale PZL P.11c - 15-12-2020 The first 1/48 scale plastic model produced by Arma Hobby. The model will be available for shipment in January 2021. We are already taking preorders. During the presale, we add a free A4 box-art printout to the model. After ordering the model, you will receive a vaucher by email confirming the purchase of the model. You can print it out and give it as a Christmas gift. Do not miss deal packages with paints or decals useful for making the model. You will find them on the model page under the pictures. V.P. Edited May 21, 2021 by Homebee 9 2 Link to comment Share on other sites More sharing options...
Acinonyx Jubatus Posted December 14, 2020 Share Posted December 14, 2020 1/48 Hurricane IIc already announced, Hawker Hurricane Mk IIc 1/48 Arma Hobby - The Rumourmonger - Britmodeller.com 1 Link to comment Share on other sites More sharing options...
franky boy Posted December 14, 2020 Share Posted December 14, 2020 I hope it’s the Hurricane mkii already mentioned. 1 Link to comment Share on other sites More sharing options...
RHWinter Posted December 14, 2020 Share Posted December 14, 2020 That's also been my first thought.. Link to comment Share on other sites More sharing options...
Seboo Posted December 15, 2020 Share Posted December 15, 2020 Ha Ha! What a surprise 🙂 P-11c. 1 Link to comment Share on other sites More sharing options...
franky boy Posted December 15, 2020 Share Posted December 15, 2020 Shame it’s not the Hurricane but this looks very nice indeed. Maybe next time. Link to comment Share on other sites More sharing options...
Solo Posted December 15, 2020 Share Posted December 15, 2020 Next kit will be 1:48 Hurricane IIc. 2 Link to comment Share on other sites More sharing options...
Troy Smith Posted December 15, 2020 Share Posted December 15, 2020 Seems the first Arma Hobby 1/48th kit is the PZL-11c http://armahobbynews.pl/en/blog/2020/12/15/p-11c-the-first-arma-hobby-model-in-1-48-scale https://www.armahobby.com/40001-pzl-p-11c-expert-set-1-48.html inclusion of Romanian markings is a net touch Surprised @Wojtek Bulhak and @GrzeM have not posted this up yet. 6 Link to comment Share on other sites More sharing options...
Wojtek Bulhak Posted December 15, 2020 Share Posted December 15, 2020 5 minutes ago, Troy Smith said: Surprised @Wojtek Bulhak and @GrzeM have not posted this up yet. Thank you Troy, I am not so fast. 2 1 Link to comment Share on other sites More sharing options...
Tbolt Posted December 15, 2020 Share Posted December 15, 2020 There is already a post for it 1 Link to comment Share on other sites More sharing options...
Troy Smith Posted December 15, 2020 Share Posted December 15, 2020 17 minutes ago, Tbolt said: There is already a post for it Thanks, I did look at this bit of forum as well, but didn't spot it, hence the post. Thread have been merged now anyway. cheers T 2 Link to comment Share on other sites More sharing options...
MrB17 Posted December 15, 2020 Share Posted December 15, 2020 2 hours ago, Wojtek Bulhak said: Thank you Troy, I am not so fast. Faster than me! I just preordered it. This is a beautiful looking kit, I love the markings options. Very well thought out. Are you going to do it in 1/32.....just joking haha. Patiently waiting for the 1/48 Hurricane Mk. IIc in 2021 as well. Thank you and Arma Hobby crew for the dedication to the hobby. Take care and stay safe Best regards Jeff 1 Link to comment Share on other sites More sharing options...
Mike Esposito Posted December 16, 2020 Share Posted December 16, 2020 I have the old 1/48 Mirage hobby p-11c with Romanian markings. This kit looks much better! 😎 2 Link to comment Share on other sites More sharing options...
Homebee Posted December 16, 2020 Author Share Posted December 16, 2020 Instructions Source: http://armahobbynews.pl/en/blog/2020/12/16/pzl-p-11c-expert-set-1-48-scale-instruction/ V.P. 5 1 Link to comment Share on other sites More sharing options...
Wojtek Bulhak Posted December 19, 2020 Share Posted December 19, 2020 On Monday-Tuesday we expect test shots of P.11c 1/48. Here is half-mould photo taken a month ago, just after milling: Link 9 Link to comment Share on other sites More sharing options...
Olmec Head Posted December 19, 2020 Share Posted December 19, 2020 A great idea and kit, I was thinking of the 1/72 Arma PZL 11 for the high wing Group Build in 2021 but this might be a better choice. In have always liked the aircraft since my father built a model of one back in the early seventies for me (|Frog?) and explained how the wing marking were offset to spoil an enemy's aiming point. 3 Link to comment Share on other sites More sharing options...
GrzeM Posted December 19, 2020 Share Posted December 19, 2020 1 hour ago, Olmec Head said: A great idea and kit, I was thinking of the 1/72 Arma PZL 11 for the high wing Group Build in 2021 but this might be a better choice. In have always liked the aircraft since my father built a model of one back in the early seventies for me (|Frog?) and explained how the wing marking were offset to spoil an enemy's aiming point. It must have been Revell or Heller, I don't think Frog ever did PZL. Thank you for good words!!! 2 Link to comment Share on other sites More sharing options...
KRK4m Posted December 19, 2020 Share Posted December 19, 2020 47 minutes ago, GrzeM said: It must have been Revell or Heller, I don't think Frog ever did PZL. Yes, you're right - FROG had never offered one 2 hours ago, Olmec Head said: I have always liked the aircraft since my father built a model of one back in the early seventies for me (|Frog?) and explained how the wing marking were offset to spoil an enemy's aiming point. If "early seventies" thus the only one available was the Revell one. The much better Heller kit appeared in 1977. Cheers Michael 1 Link to comment Share on other sites More sharing options...
zigster Posted December 20, 2020 Share Posted December 20, 2020 I was rather surprised with that choice. Those P fighters are quite a challenge to reproduce. And I'm not sure, that Arma got to that stage yet. Until we see the sprues done, we can only speculate on shown CAD. And the wing is a deal breaker. Flat with rivets / grooved part / flat with rivets... and so - on. Looking at the (CAD) front of the engine covers - wrong again, those were not a "copy / paste" all alike. But who knows it 😉 Sure thing, cockpit looks fantastic! And I'm sure, I'll try to get one when / if they get to our shores. Regards Zig Link to comment Share on other sites More sharing options...
KRK4m Posted December 20, 2020 Share Posted December 20, 2020 3 hours ago, zigster said: I was rather surprised with that choice. Those P fighters are quite a challenge to reproduce. And I'm not sure, that Arma got to that stage yet. Until we see the sprues done, we can only speculate on shown CAD. And the wing is a deal breaker. Flat with rivets / grooved part / flat with rivets... and so - on. Looking at the (CAD) front of the engine covers - wrong again, those were not a "copy / paste" all alike. But who knows it 😉 Sure thing, cockpit looks fantastic! And I'm sure, I'll try to get one when / if they get to our shores. As you probably know, the world's only P.11c has been preserved since 1962 in the Polish Aviation Museum in Krakow. Several months ago, the plane was completely disassembled and restored step by step. Taking advantage of this rare opportunity, the museum workshop made a full-size copy of it (metal + GRP) for the Polish Air Force Museum in Dęblin. Simultaneously, several groups of aviation historians and modellers have spent hundreds of hours documenting every step and every detail. Among them there were not only the guys who are building now a full-size flying replica with the PZL-3 (Wright R-1300 "grandson") engine, but also the men from IBG and Arma Hobby. And I bet they've done their homework thoroughly. Cheers Michael 1 2 Link to comment Share on other sites More sharing options...
zigster Posted December 20, 2020 Share Posted December 20, 2020 Mr KRK4m I did not say, that any of the model-making company missed on any P11c feature to explore during that "digging through museum piece" With a large bunch of photos, they should go for book publishing? My quarry is - how much of that info they have decided to include in their production? Looking at CAD of the ARMA engine covers - man-vegetables. Draw one - then copy & paste. Do you say it is accurate? I say - it's wrong. But only to those, who cares. 1 Link to comment Share on other sites More sharing options...
dragonlanceHR Posted December 21, 2020 Share Posted December 21, 2020 I have one on preorder. it appears that I have to hold on to my Choroszy engine and cowling set a little longer. We'll see. Link to comment Share on other sites More sharing options...
Troy Smith Posted December 21, 2020 Share Posted December 21, 2020 On 20/12/2020 at 07:50, zigster said: My quarry is - how much of that info they have decided to include in their production? Looking at CAD of the ARMA engine covers - man-vegetables. Draw one - then copy & paste. Do you say it is accurate? I say - it's wrong. But only to those, who cares. Arma Hobby do engage with modellers, if you can explain a problem, they will listen. Two of the company are posting on this thread for example, @Wojtek Bulhak and @GrzeM It also helps to explain what your issue is with pictures. HTH 4 1 Link to comment Share on other sites More sharing options...
Wojtek2 Posted December 21, 2020 Share Posted December 21, 2020 (edited) On 12/20/2020 at 4:02 AM, zigster said: ....Looking at the (CAD) front of the engine covers - wrong again, those were not a "copy / paste" all alike. .......... You mean perforated panels arranged in a cone between the engine and the propeller spinner? Edited December 21, 2020 by Wojtek2 Link to comment Share on other sites More sharing options...
Wojtek Bulhak Posted December 22, 2020 Share Posted December 22, 2020 Here is a link to the story of box-art aeroplane written for armahobbynews by Wojtek Matusiak. Next week we will follow with first of Marek Rogusz's three part story on the "Winged Salamander" aeroplane. 2 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now