IPMS19 Posted November 16, 2020 Share Posted November 16, 2020 - Great cockpit,I'm eager to see your turbines and interpretation of the transfer box ... 1 1 Link to comment Share on other sites More sharing options...
Spookytooth Posted November 16, 2020 Share Posted November 16, 2020 Looking very swish in the office there Johnny, smart work sir. Stay safe. Simon. 1 1 Link to comment Share on other sites More sharing options...
Johnny Tip Posted November 16, 2020 Share Posted November 16, 2020 Ho-lee smoke, those PE switches must be from outer (aero)space! I cannot praise those two cubicles high enough, and I'm eagerly waiting for your Hind's( - the chopper, I mean) engine compartment to develope! 2 1 Link to comment Share on other sites More sharing options...
Nikolay Polyakov Posted November 16, 2020 Share Posted November 16, 2020 Hello Johnny The Hind, excellent progress on the cockpit so far! 👏 The PE parts installation looks great. On 15/11/2020 at 22:13, The Spadgent said: Next to glue is the left office panel. When I built the 72nd scale version of this kit, I glued the left office panel only on its aft and leave the forward portion to move freely - it’s saved some time on the dry fitting. On 15/11/2020 at 22:13, The Spadgent said: And I assume the gear box? That’s it! Have a nice modelling week! 👍 2 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted November 16, 2020 Share Posted November 16, 2020 This is coming along rather nicely, Johnny. I've just done a catch up an am suitably impressed. I don't think anyone has posted a shot of the Giger Hind? In 1989 I was at Odiham. Our Engineering Officer took some of us to the Helimeet at Redhill. The Russians had landed! We had free access to a Hind, a Havoc, Mil 26 and 17. It felt rather like looking at flying saucers, after all those years of the cold war. I was building the Monogram 1/48th Hind at the time. I wanted to find out where the refuelling point was on the real thing for a diorama. As well as the groundcrew, there were some heavyset chaps in bad suits. I asked nicely but got nowhere! Maybe it was my MOD nametag badge? 8 Link to comment Share on other sites More sharing options...
71chally Posted November 16, 2020 Share Posted November 16, 2020 50 minutes ago, Pete in Lincs said: In 1989 I was at Odiham. Our Engineering Officer took some of us to the Helimeet at Redhill. The Russians had landed! You lucky soul Pete, that Helitech (think Helimeet was another event?) still amazes me now, it was pre 'the wall' coming down and there was this fantastic Russian hardware on show. For me the Hind was an absolute exotic poster helicopter, loved the weirdness of the Helix, impressed by the size of the Halo, and I didn't even know the Havoc existed. I remember being invited on a trip up from Cornwall, but turned it down as I didn't think watching some Gazelles and Jet Rangers fluttering around would be worth the 500 mile round journey - how I regretted that decision! There is some good video of it somewhere that I can't find now, but some good pictures here, https://abpic.co.uk/pictures/airshow/Redhill - Helitech - 1989?f=&f=&sort=registration&order=asc 1 1 Link to comment Share on other sites More sharing options...
spruecutter96 Posted November 16, 2020 Share Posted November 16, 2020 (edited) This build is looking amazing! I will be merrily stealing.....ermmm, "borrowing" some of your techniques to try. Thanks for sharing with us. As one of the earlier posters on this thread related, when the Hind is sitting on perfectly flat ground, you can just about see that the main body is "twisted" very slightly to the right, compared to the direction of travel. This was an intentional part of the design and was introduced to help reduce the effects of torque, if I remember correctly. Apparently Zvezda are the only kit-manufacturers to re-create this part of the design. Even Trumpeter did not include the twist in their 1/35th moulds (but no surprise there, then). Good luck in your build, my friend. We can't have enough Hinds on the modelling-sites. They're pretty darned ugly, but so VERY functional. When they fought in the Russian occupation of Afghanistan, the locals called them "the Devil's Chariot". Cheers. Chris. Edited November 16, 2020 by spruecutter96 Correcting a typo. 1 Link to comment Share on other sites More sharing options...
opus999 Posted November 17, 2020 Share Posted November 17, 2020 Wow Johnny, that cockpit is amazing. It's a good thing that there are two big bubble canopies so you'll be able to see at least some of that hard work. The scratch-building is very impressive too... I really like how this is coming toge 1 Link to comment Share on other sites More sharing options...
IPMS19 Posted November 17, 2020 Share Posted November 17, 2020 - About rivet, I recently got my HIND from Russia and I've had the good surprise to find this in the box...evidently it is not a regular stuff of the kit.......Gift.....,? Whatever I thanks the donor, but I think I'm in the way for some headache and lot of time spent on this....... 10 Link to comment Share on other sites More sharing options...
perdu Posted November 17, 2020 Share Posted November 17, 2020 Ni i i ce Have fun 1 1 Link to comment Share on other sites More sharing options...
The Spadgent Posted November 17, 2020 Author Share Posted November 17, 2020 10 hours ago, IPMS19 said: - About rivet, I recently got my HIND from Russia and I've had the good surprise to find this in the box...evidently it is not a regular stuff of the kit.......Gift.....,? Whatever I thanks the donor, but I think I'm in the way for some headache and lot of time spent on this....... Oh my word!!!! That looks like the rivet set by arma models. I have been looking for that. Free in the box you say?? Lucky Sausage. I’d love that. Where did you buy it? And do you know if they sell the decals separately? Thanks for any help and good luck with your build. When will you start? John 1 Link to comment Share on other sites More sharing options...
The Spadgent Posted November 17, 2020 Author Share Posted November 17, 2020 On 15/11/2020 at 19:56, Hamden said: Very smart looking office Johnny Stay safe Roger Thank you. On 15/11/2020 at 20:28, Lewis95 said: Very tidy! Thanks. On 15/11/2020 at 20:35, perdu said: proper job J Thanks Bill. 🤩 On 15/11/2020 at 22:46, 71chally said: Superb work, you have brought the cockpit to life. Like you, I feel this is the one weak area of the kit, and really deserves a complete resin affair. Indeed! And thanks. On 15/11/2020 at 23:18, exdraken said: Your cockpit looks great! Thankee On 16/11/2020 at 00:01, CedB said: Stunning cockpit Johnny - the PE (especially the switches) certainly adds to the detail but you've scratched it even better! Great job Far too kind Mr B. 🤩 On 16/11/2020 at 07:31, Biggles87 said: Agreed; That filing cabinet at the back must be a bit difficult to reach though! John Shhhhhh. 🤣 On 16/11/2020 at 08:20, James G said: Great work again Johnny. I wish that I had some more WIP shots of the work that I did in my Hind cockpit as it is difficult to see in the final build, even with the doors open! I know what you mean. It’s really tight in there. On 16/11/2020 at 08:27, giemme said: OH MY GOODNESS! Fantastic job on the cockpit, Johnny! Ciao Thanks G. 😀 On 16/11/2020 at 10:07, IPMS19 said: - Great cockpit,I'm eager to see your turbines and interpretation of the transfer box ... So am I. Thanks. 😇 On 16/11/2020 at 11:55, Spookytooth said: Looking very swish in the office there Johnny, smart work sir. Stay safe. Simon. Cheeres. 😄 On 16/11/2020 at 12:11, Johnny Tip said: Ho-lee smoke, those PE switches must be from outer (aero)space! I cannot praise those two cubicles high enough, and I'm eagerly waiting for your Hind's( - the chopper, I mean) engine compartment to develope! 🤣🤣 Thank you. 23 hours ago, Nikolay Polyakov said: Hello Johnny The Hind, excellent progress on the cockpit so far! 👏 The PE parts installation looks great. When I built the 72nd scale version of this kit, I glued the left office panel only on its aft and leave the forward portion to move freely - it’s saved some time on the dry fitting. That’s it! Have a nice modelling week! 👍 Ahhh I wish I read that before gluing. It seems to have gone in though. 👍 22 hours ago, Pete in Lincs said: This is coming along rather nicely, Johnny. I've just done a catch up an am suitably impressed. I don't think anyone has posted a shot of the Giger Hind? In 1989 I was at Odiham. Our Engineering Officer took some of us to the Helimeet at Redhill. The Russians had landed! We had free access to a Hind, a Havoc, Mil 26 and 17. It felt rather like looking at flying saucers, after all those years of the cold war. I was building the Monogram 1/48th Hind at the time. I wanted to find out where the refuelling point was on the real thing for a diorama. As well as the groundcrew, there were some heavyset chaps in bad suits. I asked nicely but got nowhere! Maybe it was my MOD nametag badge? Wow!!!! Amazing story, thanks for sharing. I saw a model version of the Giger mi-24 on FB the other day. Man that one was special. 😇😇 21 hours ago, spruecutter96 said: This build is looking amazing! I will be merrily stealing.....ermmm, "borrowing" some of your techniques to try. Thanks for sharing with us. As one of the earlier posters on this thread related, when the Hind is sitting on perfectly flat ground, you can just about see that the main body is "twisted" very slightly to the right, compared to the direction of travel. This was an intentional part of the design and was introduced to help reduce the effects of torque, if I remember correctly. Apparently Zvezda are the only kit-manufacturers to re-create this part of the design. Even Trumpeter did not include the twist in their 1/35th moulds (but no surprise there, then). Good luck in your build, my friend. We can't have enough Hinds on the modelling-sites. They're pretty darned ugly, but so VERY functional. When they fought in the Russian occupation of Afghanistan, the locals called them "the Devil's Chariot". Cheers. Chris. Thanks for all the information much appreciated. I think she looks amazing but as they say “beauty is in the eye of the beholder”. “Devils chariot” I love that! 😍 18 hours ago, opus999 said: Wow Johnny, that cockpit is amazing. It's a good thing that there are two big bubble canopies so you'll be able to see at least some of that hard work. The scratch-building is very impressive too... I really like how this is coming toge Thank you kind sir. 🤩🤩 5 Link to comment Share on other sites More sharing options...
IPMS19 Posted November 18, 2020 Share Posted November 18, 2020 12 hours ago, The Spadgent said: Oh my word!!!! That looks like the rivet set by arma models. I have been looking for that. Free in the box you say?? Lucky Sausage. I’d love that. Where did you buy it? And do you know if they sell the decals separately? Thanks for any help and good luck with your build. When will you start? John -I Received this kit from a friend in an exchange process for an AMK 1/48 Tomcat so I can't say where he got it, but on the box cover there is an ARMA MODEL sticker in cyrilic character. - I just began my last FULCRUM I will begin my Hind after......say mid December 2 1 Link to comment Share on other sites More sharing options...
Dandie Dinmont Posted November 18, 2020 Share Posted November 18, 2020 That cockpit is fantastic Johnny! The PE switchgear may have been a pain to put together but it certainly looks the business. Craig. 1 Link to comment Share on other sites More sharing options...
roks Posted November 18, 2020 Share Posted November 18, 2020 14 hours ago, The Spadgent said: Oh my word!!!! That looks like the rivet set by arma models. I have been looking for that. Free in the box you say?? Lucky Sausage. I’d love that. Where did you buy it? And do you know if they sell the decals separately? Thanks for any help and good luck with your build. When will you start? John Hello,friends! That decal sheet is part of preorder at arma models shop,and,unfortunately, it`s unable for other buyers(... It is wery useful bonus for that model,indeed! P.S. Nice build, btw! 1 Link to comment Share on other sites More sharing options...
The Spadgent Posted November 18, 2020 Author Share Posted November 18, 2020 7 hours ago, IPMS19 said: -I Received this kit from a friend in an exchange process for an AMK 1/48 Tomcat so I can't say where he got it, but on the box cover there is an ARMA MODEL sticker in cyrilic character. - I just began my last FULCRUM I will begin my Hind after......say mid December Ok thanks . Lucky you eh. I'll look forward to your build. 6 hours ago, Dandie Dinmont said: That cockpit is fantastic Johnny! The PE switchgear may have been a pain to put together but it certainly looks the business. Craig. Thank you sir. too kind. 4 hours ago, roks said: Hello,friends! That decal sheet is part of preorder at arma models shop,and,unfortunately, it`s unable for other buyers(... It is wery useful bonus for that model,indeed! P.S. Nice build, btw! That's a shame. are there no plans to sell it? 2 Link to comment Share on other sites More sharing options...
roks Posted November 18, 2020 Share Posted November 18, 2020 2 hours ago, The Spadgent said: Ok thanks . Lucky you eh. I'll look forward to your build. Thank you sir. too kind. That's a shame. are there no plans to sell it? Yes,it`s really pity! Maybe,later, they do it, but not now, definitely. Me is one of those luckies,so now i`m decaling my Hind and it looks very cool! You can ask at russian model forums,maybe somebody sell some surplus for You? 1 Link to comment Share on other sites More sharing options...
The Spadgent Posted November 18, 2020 Author Share Posted November 18, 2020 12 minutes ago, roks said: Yes,it`s really pity! Maybe,later, they do it, but not now, definitely. Me is one of those luckies,so now i`m decaling my Hind and it looks very cool! You can ask at russian model forums,maybe somebody sell some surplus for You? It’s ok I can stick with my plan A. Are you doing a WIP? 1 Link to comment Share on other sites More sharing options...
roks Posted November 18, 2020 Share Posted November 18, 2020 (edited) No,i don`t open WIP tread,cause, normally ,build took a lot of time for me. So,i decide to do it,when most of job will done to prevent frustration risk) My progress with rivets. Edited November 18, 2020 by roks 17 1 Link to comment Share on other sites More sharing options...
The Spadgent Posted November 18, 2020 Author Share Posted November 18, 2020 2 hours ago, roks said: No,i don`t open WIP tread,cause, normally ,build took a lot of time for me. So,i decide to do it,when most of job will done to prevent frustration risk) My progress with rivets. Wow! You should, it’s great to share ideas and such. Those rivets do look good. So many. 😳 do they paint over well? 1 Link to comment Share on other sites More sharing options...
IPMS19 Posted November 19, 2020 Share Posted November 19, 2020 - A question which arise to me, are these rivet decals to be posed before painting or after as the camo pattern requires significant masking job is there a risk to tear them off when removing it....., 3 Link to comment Share on other sites More sharing options...
Andrew Perren Posted November 19, 2020 Share Posted November 19, 2020 Fantastic progress. You are really going to town on it. I have the same kit on the bench and went with the Quinta cockpit details. I can't speak highly enough of them. Can't wait to see your next update, Cheers. 1 1 Link to comment Share on other sites More sharing options...
roks Posted November 19, 2020 Share Posted November 19, 2020 1 hour ago, IPMS19 said: - A question which arise to me, are these rivet decals to be posed before painting or after as the camo pattern requires significant masking job is there a risk to tear them off when removing it....., Well,it question for me to, cause i didn`t that never before. But, i hope,after welding with acetic acid (in my case),and priming,adgesion should be strong enough. Also i saw completed model with that decals rivets,and autor didn`t meet any problems with it. Spadgent,sorry for offtop at your tread, sir! 3 2 Link to comment Share on other sites More sharing options...
corsaircorp Posted November 20, 2020 Share Posted November 20, 2020 Great job my Dear Spad !! It is Spadgilent !! CC 1 1 1 Link to comment Share on other sites More sharing options...
exdraken Posted November 20, 2020 Share Posted November 20, 2020 Wow, great job, Mr. Riveter! 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now