Evil_Toast_RSA Posted October 25, 2020 Share Posted October 25, 2020 (edited) Been having fun doing these WIPs on this site, so my next unfortunate victim is the venerable Stuart from Academy. I'm not a armour guy by any stretch, but occasionally I build things that don't fly. This is the box art, and will be doing it in the Caunter scheme. Will be using Tamiya paints (my local Vallejo supplier is out of Portland Stone and Silver Grey) so will be using mixes suggested on the MAVFA site. Very informative. I would like to point out that I'm one of those weirdos who likes the very, very wrong light blue used on many old style schemes, but will be using the correct shade of silver grey this time around. Been futzing with it whilst my MiG-21 is at the annoying end phase where there's plenty of time between stages, so getting prepped for the next project. I do have a question though, involving tracks. Specifically ones with rubber blocks on the tracks. Most tutorials do the steel only tracks so if anyone can link or show one with rubber pads I would appreciate it. Edited December 13, 2020 by Evil_Toast_RSA 6 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted October 26, 2020 Author Share Posted October 26, 2020 Finished the hull compartment to see what it looked like when complete, even though it was always going to be buttoned up. So, on the off chance this answers someone's question in future, that's what it looks like when assembled by someone who couldn't be bothered. Also, put in a plasticard spacer to eliminate the joint on the nose, dry fitting has shown a potential razor blade in the candyfloss of life in this area. I have now chased that gap to the running gear section, but that should be hidden by the tracks at the end. Got the side skirts on, the joins on the front fenders is not pretty by any stretch of the imagination. Some putty will sort that out. The joins around the drivers hatch need some work, but nothing terribly drastic. Think I'm going to use the vinyl tracks, from what I've seen their pretty taut on the real thing so track sag isn't something to concern myself about. Plus doing individual link tracks is the number 1 reason I don't do armour much, so apathy scores another point. So, next up, going to start priming and painting the lower hull (seperately) soon, one or two more spots to clean up first. 8 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted October 31, 2020 Author Share Posted October 31, 2020 (edited) Managed to assemble 98% of the kit, definitely not a complex build at all. Started painting the 3 elements in a custom dark brown mix using Tamiya XF-1(6):XF-9(1):XF-68(3) to represent the base steel, not a precise mix, did futz around a little bit getting it right. It's darker than the pic would suggest. Next I'm going for the Olive Drab (thinking XF-62(2):XF-59/60?(1). Then onto Caunter. Trying to build up the colours as applied IRL and hopefully any natural "chipping" IE clumsiness will show through. That's the theory at least.... Things may take a slowdown now, going to be finishing off my MiG-21 this week hopefully. Edited October 31, 2020 by Evil_Toast_RSA Words 13 Link to comment Share on other sites More sharing options...
robw_uk Posted November 1, 2020 Share Posted November 1, 2020 nice start... love the caunter scheme so looking forward to seeing yours 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 13, 2020 Author Share Posted November 13, 2020 On 01/11/2020 at 20:16, robw_uk said: nice start... love the caunter scheme so looking forward to seeing yours Don't! It hasn't gotten off to good start, stripped everything off and started painting again since the last update! For some reason the paint was grainy in some areas, think the heat + IPA and high PSI whilst airbrushing was too blame. Broken out my summer paint pack of retarders/X-20A and it seems to be working. 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 13, 2020 Author Share Posted November 13, 2020 Got the ball rolling. Mixed the Portland Stone as per MAVFA suggestions using Tamiya paint. XF-2 (6) + XF-57 (1) + XF-3 (1). Looks odd, but I'm not educated enough on the subject to rate a rank of Amateur. So, does that look right? Left it a bit patchy, will start on doing some fading tomorrow if the colour is correct?? 8 Link to comment Share on other sites More sharing options...
robw_uk Posted November 14, 2020 Share Posted November 14, 2020 nice... colour looks close to what I have in the AK Interactive Caunter set (not saying they are correct of course just that it is a similar colour) 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 14, 2020 Author Share Posted November 14, 2020 With that piece of good news, did the initial weathering on the Portland Stone using increasing increments of XF-2. Looks awfully bright, will tone that down with a filter of some sort. Probably XF-57 Buff? Also did the Slate turret roof using XF-24 (1) + XF-4 (1). Weathered that with incremental usage of XF-4. On a side note, I'm amazed at how close Slate Grey is to Olive Drab. Answers that niggling question about Lend Lease FAA stuff I have half an eye on. Next, masking and the application of the national marking around the 2" smoke launchers. 8 Link to comment Share on other sites More sharing options...
robw_uk Posted November 14, 2020 Share Posted November 14, 2020 nice work... I am gearing myself up to do caunter on the Scammel transporter so you will give me some inspiration Link to comment Share on other sites More sharing options...
Kingsman Posted November 14, 2020 Share Posted November 14, 2020 (edited) I use rattle can Army Painter Leather Brown primer as the base colour. Although it could be a little darker it's not bad for wear-through and pre-shading. Edited November 14, 2020 by Das Abteilung spelling Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 15, 2020 Author Share Posted November 15, 2020 Masking done. Tonight should getvthe Silver Grey done. 7 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 17, 2020 Author Share Posted November 17, 2020 (edited) Got the Silver Grey down and weathered. Used XF-21(7)+XF-19(1)+XF-4(1). Lightened it with increasing increments of XF-19. Must admit, the masking came out better than I thought! Next, a filter of XF-57 to tone/fade/make everything a bit dusty looking. Well, that's the theory at least :D! Also got the rubber bits done on the road wheels, a 1:1 of VMC 70.862 & 70.950. Did the exposed metal on the rear drive wheel in a 1:1 of VMC 70.950 & 70.872. Edited November 17, 2020 by Evil_Toast_RSA 9 Link to comment Share on other sites More sharing options...
robw_uk Posted November 18, 2020 Share Posted November 18, 2020 very nice... one question though, was the rear wheel rubberised? looks similar to the M4 HST and sure that was just all metal (or rather thats how I painted it ;-)) Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 18, 2020 Author Share Posted November 18, 2020 3 hours ago, robw_uk said: very nice... one question though, was the rear wheel rubberised? looks similar to the M4 HST and sure that was just all metal (or rather thats how I painted it ;-)) The later M5 I think was rubberized, but I'm trying to simulate the paint wearing off where it contacts the track over time + the effects of desert sand on the finish, hopefully :D! Used a black/brown chipping colour for the idler wheel. 1 Link to comment Share on other sites More sharing options...
Bullbasket Posted November 19, 2020 Share Posted November 19, 2020 13 hours ago, Evil_Toast_RSA said: The later M5 I think was rubberized, but I'm trying to simulate the paint wearing off where it contacts the track over time + the effects of desert sand on the finish, hopefully :D! Used a black/brown chipping colour for the idler wheel. The M3 did have a rubber tyre on the large idler wheel. Here's a photo of the one in the Patton Museum. If you want to look at more M3 photos, have a look here; http://svsm.org/gallery/M3_stuart_family HTH's. John. 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 19, 2020 Author Share Posted November 19, 2020 (edited) Huh, well, there you go! Makes life a bit easier! Edited November 19, 2020 by Evil_Toast_RSA Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted November 30, 2020 Author Share Posted November 30, 2020 (edited) Quick update. Family time and a P-39 have been diverting some attention away from my Stuart, but been plugging away at it. Decals done (lol), decided to paint the national insignia on the skirts, turret sides and hull front (saw some research on this kit online and it looked like they applied one there too). Did some enamel washes to make it a bit grimy, still think I need to work on it tomorrow to neaten one or two areas up. Edited November 30, 2020 by Evil_Toast_RSA Added pic 8 Link to comment Share on other sites More sharing options...
Longbow Posted November 30, 2020 Share Posted November 30, 2020 That paint job is looking very nice !! I love the shades you've used. 1 Link to comment Share on other sites More sharing options...
Bullbasket Posted December 1, 2020 Share Posted December 1, 2020 The decals and weathering have brought it to life. It looks great. John. 1 Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted December 6, 2020 Author Share Posted December 6, 2020 (edited) Did some weathering, staining, streaking and fading today with oils. I'm rather pleased with it. Now it gets to rest for a few days so the oils can dry a bit, then matt coat, chipping and some pigment work for the tracks and hull and done! Plus attaching .30 Cal to turret and radio aerial from some wire. Edited December 6, 2020 by Evil_Toast_RSA Words 4 Link to comment Share on other sites More sharing options...
Carius Posted December 6, 2020 Share Posted December 6, 2020 Great job so far Link to comment Share on other sites More sharing options...
Geo1966 Posted December 7, 2020 Share Posted December 7, 2020 How is this as a kit? Fit of parts, details, etc. I am considering getting the Airfix version which i belive is the same kit. Thanks, George Link to comment Share on other sites More sharing options...
Evil_Toast_RSA Posted December 7, 2020 Author Share Posted December 7, 2020 2 hours ago, Geo1966 said: How is this as a kit? Fit of parts, details, etc. I am considering getting the Airfix version which i belive is the same kit. Thanks, George Yes, same kit with a different scheme and markings. I didn't have a problem with fit for the most part, only the part below was a bit of an issue. On 26/10/2020 at 21:19, Evil_Toast_RSA said: Got the side skirts on, the joins on the front fenders is not pretty by any stretch of the imagination. Some putty will sort that out. The joins around the drivers hatch need some work, but nothing terribly drastic. Detail I would say is adequate, but the kit price is very attractive (Airfix will charge more from what I've seen though) so it evens out for me at least. This is a bit of a subjective question though. The only thing I can add here that's not included in the pics is you get a different set of wheels and idlers (for an American version I'm assuming?) and a sprue with an extra turret mounted .50 cal and some extra gubbins like knapsacks and tools (American version again?) for your spares box. If your interested can upload a pic tonight. Accuracy I cannot comment on, it looks like a Stuart to me. Hopefully someone else may chime in here and elaborate on this. Link to comment Share on other sites More sharing options...
Bullbasket Posted December 7, 2020 Share Posted December 7, 2020 If you're interested in a review of the Academy kit, have a look here; https://www.perthmilitarymodelling.com/reviews/vehicles/academy/acd1399.htm John. Link to comment Share on other sites More sharing options...
Geo1966 Posted December 8, 2020 Share Posted December 8, 2020 Thanks Gents, seems a reasonable kit for £18 ish then. Tempted by the Academy with the extra spares, but like the colour scheme of the Airfix. I appreciate the Airfix scheme is perhaps not 100% accurate as i have seen discussion on here about it before. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now