Jump to content

F-14D Vandy 1 VX-9, 1/72 Academy


Recommended Posts

Hello :D

 

A few weeks ago I've started to work on the excelent kit of the F-14 Tomcat in 1/72 scale from Academy. On the box there is an A version of the Tomcat but the box includes all the parts to biuld the B or D version (except the complete SJU-17 ejection seat). 

As in the title, I will try to biuld the D version, exactly the black Vandy 1 from Air Test and Evaluation Squadron 9 (VX-9) called "The Vampires".

Traditionally I've started the work with the cockpit. The details of the kit are great but I added some aftermarket parts like the control column, ejection seats and HUD parts from the Aires detail set. I've also made the canvas covers from paper tissue ;) So this is what I have pulled together :D

 

01184527c0a44240.jpg

3a2f9ff6140f5e2f.jpg

7f098cd2c1ffb6dc.jpg

c604de554d0c90d8.jpg

6ee91b7b0cbd606e.jpg

850bb0ee5a9eea70.jpg

5a834601477f985b.jpg

38a47e622e1f7b25.jpg

d7a172d07af8739d.jpg

de42ae39262379fc.jpg

  • Like 10
Link to comment
Share on other sites

I like what you have done with the cockpit, it looks very good. I have this kit in the stash and plan on building it next year so I will be following this with interest.

Link to comment
Share on other sites

Nice start! I see you dressed up the IP coamings, you should check right now that they still fit inside the clear parts, the fit is tight and you probably don't want to find out at the end of your build :)

 

Also, you should have fun with the MYK decals, they're actually similar to HGW wet transfers and great quality.

  • Like 1
Link to comment
Share on other sites

One to watch with interest. A fab scheme and one I may do at some point. I've yet to get my hands on the academy kit, but by all accounts it looks quite nice. Good luck with the build and will follow avidly.

J

Link to comment
Share on other sites

  • 1 month later...

Hello :)

I'm slowly moving forward with the build. To close the fuselage I had to deal with the air intakes, for this I've used Quickboost  seamless intakes:

 

 

21ec0b74a810bba1.jpg

0fdcd4b5217749f1.jpg

The next step was to put together the front part of the fuselage with the cockpit, this kit is like bricks so every part fitted great!

I was too hurry with the reinforcement of the RIO step because later i found out that Vandy didn't had it... :D

 

 

aa24cb06e3ddf558.jpg

34cc2be8c8abda82.jpg

 

To glue together the fuselage, the front wheel bay had to be done also:

 

 

2825c88743378011.jpg

00cdcbaa42291ac5.jpg

I had made a few more smaller steps like sand the upper air exhaust to make them thinner, and drilled out the rear fuel dump pipe:

 

e0659c2b0a1bb0c9.jpg

37c51bcd422593d0.jpg

 

Work is going on... :D

  • Like 2
Link to comment
Share on other sites

  • 2 months later...

Welcome after a longer break :D

 

I've manage to put together the whole fuselage into one part. I had to remove the reinforcement of the RIO's step because Vandy 1 didn't had it.

I drilled some small ventilation slots in some places around the fuselage ;) The last step was to spray grey Mr.finishing surfacer 1500 on the kit.

 

See You next time ;)

 

40d9ed40a742ee7c.jpg

637923e91d0e6eda.jpg

e351873c91c40e62.jpg

df43b8062c33a8c2.jpg

73401affe3b4fc14.jpg

ea08fcdea59fccd4.jpg

4e137679963642c6.jpg

  • Like 4
Link to comment
Share on other sites

  • 2 months later...

Welcome after a longer break ;)

 

Finally I could go on with the paint job! This week I finished the base layer. The base colour is FS 17038 from Billmodel, the nose is painted in Gunze H2 Gloss Black, and finally the anti reflective panel in front of the canopy is Tamiya Tire Black. Shading, paint wear will be made with oil paints, washes and acrylic penciles. I'm also working on the landing gear struts:

 

4adbf59b571316b6.jpg

899265d50374025c.jpg

9c511d4f85ab98e9.jpg

a1f27e509c92783c.jpg

4dcc98acaadf1c51.jpg

89fbcf2ce48e09a9.jpg

21ee6cf2fcf0fd53.jpg

 

Stay tuned!

 

 

  • Like 10
Link to comment
Share on other sites

  • 1 month later...

Hello again ;)

 

I've worked a little bit on Vandy and now, He can stand on His own feet :D

 

eb716a9c486f84be.jpg

038dcb8f57606b6c.jpg

d613a3de1c054ea5.jpg

05124efdbe0e6e23.jpg

25d5e253bf628c77.jpg

3e7c72b55015d66b.jpg

4cd6cb76fe60f93c.jpg

 

I'm afraid that I should have used a darker wash for the panel lines and I will have to work now with a darker tone 😕

  • Like 7
Link to comment
Share on other sites

Nice work so far, and I agree with you on the wash. I like the antiglare and antigrip zones though, looking good.

 

If you haven't applied a gloss varnish yet, I think you should try to remove the decal film on your markings. MYK "ASU-DECA" decals are like transfers in that regard. Maybe do a test with a spare decal first.

Edited by gota
Link to comment
Share on other sites

  • 3 months later...

Hello everyone! ;)

 

I'm coming back to Vandy 1, this time I will try to finish this topic soon. I've made some few small steps ahead:

 

1. I felt that I have used overbright wash for the panel lines. So i took Ammo Mig Black Night panelliner and made them darker, I think that now they look much more realistic than before.

2. I've painted the front canopy glass with highly thinned mixture of blue and purple.

3. The fuel tanks and the horizontal stabilizers are glued to the fuselage.

 

That's all for today ;)

 

bd9d016ea1b6914f.jpg

638c2d57a4b1c27d.jpg

bfe8849c8dcb7208.jpg

5786818ca0b3cf9c.jpg

20bb962ff84e3142.jpg

33e53717397890b9.jpg

1f98dd2268348113.jpg

 

  • Like 4
Link to comment
Share on other sites

 

Thank You all! :D 

 

5 hours ago, Robert said:

Can you tell me which seats you used please.

 

Regards

Robert

Robert, I used resin seats from Aires ;)

Edited by Pablito
Link to comment
Share on other sites

11 hours ago, Pablito said:

Hello everyone! ;)

 

I'm coming back to Vandy 1, this time I will try to finish this topic soon. I've made some few small steps ahead:

 

1. I felt that I have used overbright wash for the panel lines. So i took Ammo Mig Black Night panelliner and made them darker, I think that now they look much more realistic than before.

2. I've painted the front canopy glass with highly thinned mixture of blue and purple.

3. The fuel tanks and the horizontal stabilizers are glued to the fuselage.

 

That's all for today ;)

 

bd9d016ea1b6914f.jpg

638c2d57a4b1c27d.jpg

bfe8849c8dcb7208.jpg

5786818ca0b3cf9c.jpg

20bb962ff84e3142.jpg

33e53717397890b9.jpg

1f98dd2268348113.jpg

 

This really looks excellent so far! Bringing life to the Vandy-1 black Tomcats can be tough, but you are nailing it. :)

 

-Nick

Edited by npirnia
Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...