Pablito Posted October 2, 2020 Share Posted October 2, 2020 Hello A few weeks ago I've started to work on the excelent kit of the F-14 Tomcat in 1/72 scale from Academy. On the box there is an A version of the Tomcat but the box includes all the parts to biuld the B or D version (except the complete SJU-17 ejection seat). As in the title, I will try to biuld the D version, exactly the black Vandy 1 from Air Test and Evaluation Squadron 9 (VX-9) called "The Vampires". Traditionally I've started the work with the cockpit. The details of the kit are great but I added some aftermarket parts like the control column, ejection seats and HUD parts from the Aires detail set. I've also made the canvas covers from paper tissue So this is what I have pulled together 10 Link to comment Share on other sites More sharing options...
phildagreek Posted October 2, 2020 Share Posted October 2, 2020 I built this a little while ago straight from the box, it’s a nice kit but my ‘pit didn’t look as good as yours! Link to comment Share on other sites More sharing options...
Billy54 Posted October 2, 2020 Share Posted October 2, 2020 I like what you have done with the cockpit, it looks very good. I have this kit in the stash and plan on building it next year so I will be following this with interest. Link to comment Share on other sites More sharing options...
Hook Posted October 2, 2020 Share Posted October 2, 2020 Nice progress in the pit! Which decals will you use? Cheers, Andre Link to comment Share on other sites More sharing options...
Pablito Posted October 2, 2020 Author Share Posted October 2, 2020 4 hours ago, Hook said: Nice progress in the pit! Which decals will you use? Cheers, Andre Andre, I will use the set from Myk Design 1 Link to comment Share on other sites More sharing options...
Hook Posted October 3, 2020 Share Posted October 3, 2020 Looks like a nice set! I have Hase's F-14D boxing with these markings in the stash: https://www.scalemates.com/kits/hasegawa-k118-f-14d-super-tomcat-vandy-1--227184 Cheers, Andre Link to comment Share on other sites More sharing options...
gota Posted October 3, 2020 Share Posted October 3, 2020 Nice start! I see you dressed up the IP coamings, you should check right now that they still fit inside the clear parts, the fit is tight and you probably don't want to find out at the end of your build Also, you should have fun with the MYK decals, they're actually similar to HGW wet transfers and great quality. 1 Link to comment Share on other sites More sharing options...
Booty003 Posted October 3, 2020 Share Posted October 3, 2020 Wow, what a great start you have made. Superb mate. Link to comment Share on other sites More sharing options...
Jon020 Posted October 5, 2020 Share Posted October 5, 2020 One to watch with interest. A fab scheme and one I may do at some point. I've yet to get my hands on the academy kit, but by all accounts it looks quite nice. Good luck with the build and will follow avidly. J Link to comment Share on other sites More sharing options...
Pablito Posted November 7, 2020 Author Share Posted November 7, 2020 Hello I'm slowly moving forward with the build. To close the fuselage I had to deal with the air intakes, for this I've used Quickboost seamless intakes: The next step was to put together the front part of the fuselage with the cockpit, this kit is like bricks so every part fitted great! I was too hurry with the reinforcement of the RIO step because later i found out that Vandy didn't had it... To glue together the fuselage, the front wheel bay had to be done also: I had made a few more smaller steps like sand the upper air exhaust to make them thinner, and drilled out the rear fuel dump pipe: Work is going on... 2 Link to comment Share on other sites More sharing options...
Pablito Posted January 23, 2021 Author Share Posted January 23, 2021 Welcome after a longer break I've manage to put together the whole fuselage into one part. I had to remove the reinforcement of the RIO's step because Vandy 1 didn't had it. I drilled some small ventilation slots in some places around the fuselage The last step was to spray grey Mr.finishing surfacer 1500 on the kit. See You next time 4 Link to comment Share on other sites More sharing options...
Jon020 Posted January 24, 2021 Share Posted January 24, 2021 Looks superb. Looks like we're also almost at the same stages in our builds. Link to comment Share on other sites More sharing options...
Pablito Posted April 18, 2021 Author Share Posted April 18, 2021 Welcome after a longer break Finally I could go on with the paint job! This week I finished the base layer. The base colour is FS 17038 from Billmodel, the nose is painted in Gunze H2 Gloss Black, and finally the anti reflective panel in front of the canopy is Tamiya Tire Black. Shading, paint wear will be made with oil paints, washes and acrylic penciles. I'm also working on the landing gear struts: Stay tuned! 10 Link to comment Share on other sites More sharing options...
Hook Posted April 19, 2021 Share Posted April 19, 2021 Lovely work! Link to comment Share on other sites More sharing options...
Gidge Posted April 19, 2021 Share Posted April 19, 2021 Loving your work. I've been contemplating a similar scheme for my next build. Am keen to see how this one turns out Link to comment Share on other sites More sharing options...
Gremlin Posted April 20, 2021 Share Posted April 20, 2021 nice project!!!, well done cheers Link to comment Share on other sites More sharing options...
Pablito Posted May 23, 2021 Author Share Posted May 23, 2021 Hello again I've worked a little bit on Vandy and now, He can stand on His own feet I'm afraid that I should have used a darker wash for the panel lines and I will have to work now with a darker tone 😕 7 Link to comment Share on other sites More sharing options...
gota Posted May 27, 2021 Share Posted May 27, 2021 (edited) Nice work so far, and I agree with you on the wash. I like the antiglare and antigrip zones though, looking good. If you haven't applied a gloss varnish yet, I think you should try to remove the decal film on your markings. MYK "ASU-DECA" decals are like transfers in that regard. Maybe do a test with a spare decal first. Edited May 27, 2021 by gota Link to comment Share on other sites More sharing options...
Pablito Posted September 5, 2021 Author Share Posted September 5, 2021 Hello everyone! I'm coming back to Vandy 1, this time I will try to finish this topic soon. I've made some few small steps ahead: 1. I felt that I have used overbright wash for the panel lines. So i took Ammo Mig Black Night panelliner and made them darker, I think that now they look much more realistic than before. 2. I've painted the front canopy glass with highly thinned mixture of blue and purple. 3. The fuel tanks and the horizontal stabilizers are glued to the fuselage. That's all for today 4 Link to comment Share on other sites More sharing options...
Hook Posted September 5, 2021 Share Posted September 5, 2021 That does look good - thanks for the update! Cheers, Andre Link to comment Share on other sites More sharing options...
Robert Posted September 5, 2021 Share Posted September 5, 2021 Can you tell me which seats you used please. Regards Robert Link to comment Share on other sites More sharing options...
Hoops Posted September 5, 2021 Share Posted September 5, 2021 Great work so far, I'm looking forward to the next update! That kit looks really nice, I'll have to add one to my stash! Cheers, Hoops Link to comment Share on other sites More sharing options...
Pablito Posted September 5, 2021 Author Share Posted September 5, 2021 (edited) Thank You all! 5 hours ago, Robert said: Can you tell me which seats you used please. Regards Robert Robert, I used resin seats from Aires Edited September 5, 2021 by Pablito Link to comment Share on other sites More sharing options...
npirnia Posted September 5, 2021 Share Posted September 5, 2021 (edited) 11 hours ago, Pablito said: Hello everyone! I'm coming back to Vandy 1, this time I will try to finish this topic soon. I've made some few small steps ahead: 1. I felt that I have used overbright wash for the panel lines. So i took Ammo Mig Black Night panelliner and made them darker, I think that now they look much more realistic than before. 2. I've painted the front canopy glass with highly thinned mixture of blue and purple. 3. The fuel tanks and the horizontal stabilizers are glued to the fuselage. That's all for today This really looks excellent so far! Bringing life to the Vandy-1 black Tomcats can be tough, but you are nailing it. -Nick Edited September 5, 2021 by npirnia Link to comment Share on other sites More sharing options...
Pablito Posted October 1, 2021 Author Share Posted October 1, 2021 Hello, The construction is getting slowly to the end. This time I've made the exhaust nozzles and made some work with the canopy 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now