Hamden Posted September 28, 2020 Share Posted September 28, 2020 That is looking really nice liking your attention to detail Roger 1 Link to comment Share on other sites More sharing options...
M3talpig Posted September 28, 2020 Author Share Posted September 28, 2020 2 hours ago, Dads203 said: Even with a hurty thumb that’s some outstanding work Thanks bud ..and yes it does hurt 12 minutes ago, Hamden said: That is looking really nice liking your attention to detail Thanks Roger ...nearly there now not much more to go. 2 Link to comment Share on other sites More sharing options...
Jasper dog Posted September 28, 2020 Share Posted September 28, 2020 5 hours ago, M3talpig said: Seriously do you think i should pull the pic...i didn't post it to be nasty i posted as a sort of warning to pay attention when handling sharp things...don't want to annoy anybody ...i will gladly pull the pic it's not a problem Hi bud, just had to take the Mrs out (by that I mean, out as in outside not out as in through the cross hairs btw) i guess you decided to literally pull your thumb out! Probably/poss for the best but we all appreciated it! We all know it wasn't posted as a nasty and in the same position, I'm sure anyone would have done it.. Just glad you hadn't sat upon a rusty nail.... Your JT is really smashing, looking forward to seeing it finished.... Just wondering, if thats the base....The Claret stain.... ( too soon?) 1 Link to comment Share on other sites More sharing options...
M3talpig Posted September 28, 2020 Author Share Posted September 28, 2020 (edited) 36 minutes ago, Jasper dog said: Hi bud, just had to take the Mrs out Well it did cross my mind that you might have shot her.....seemed a bit extreme but i have had those thought myself....so nobody would blame you.......apart from her family 36 minutes ago, Jasper dog said: We all know it wasn't posted as a nasty and in the same position, I'm sure anyone would have done it.. It didn't cross my mind when i posted .....but then when you mentioned it then hit me that it might not be all adults that view these threads so i got the mods to remove it......don't want the younger generation blaming me for PTSD from my manky digit 36 minutes ago, Jasper dog said: Just glad you hadn't sat upon a rusty nail.... Oh now come on that would have been a class post...... can you imagine 36 minutes ago, Jasper dog said: Just wondering, if thats the base....The Claret stain.... ( too soon?) it does ...how did you see that ....there is a big claret stain right under the YT ...i was shaving the side of the base when i slipped there was claret all over the place....thank god i had the presence of mind to keep my hand away from the model Edited September 28, 2020 by M3talpig 2 Link to comment Share on other sites More sharing options...
Jasper dog Posted September 28, 2020 Share Posted September 28, 2020 1 hour ago, M3talpig said: Well it did cross my mind that you might have shot her.....seemed a bit extreme but i have had those thought myself....so nobody would blame you.......apart from her family Bit harsh! Certainly free up more bench time....🤔 2 hours ago, M3talpig said: Oh now come on that would have been a class post...... can you imagine Jeeze mate for the love of God...... No one needs that image, I'm retching with just the thought! How is anyone supposed to sleep after that, bit like watching a horror film late at night.... 2 Link to comment Share on other sites More sharing options...
M3talpig Posted September 30, 2020 Author Share Posted September 30, 2020 Small update ....so close to finished i can taste it....... gun cleaning rods done just the brackets to finish on them ......ground work is done and things like the tarps have been made but need to set before i can paint them. I can't recommend this putty enough it's the mutz nutz for tarps and for sculpting your own kit bags and other soft equipment. https://www.ebay.co.uk/itm/Modelling-Stuff-Hobby-Sculpt-Kneadatite-Blue-Yellow-36-inches-Makes-Green-Putty/390938693328?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 8 Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 I have a lot to learn where armour builds are concerned but I can recognise quality work when I see it and boy your work is truly superb what a beauty. Hat's off to you sir very inspirational indeed 👏 1 Link to comment Share on other sites More sharing options...
M3talpig Posted September 30, 2020 Author Share Posted September 30, 2020 3 minutes ago, Andy J said: I have a lot to learn where armour builds are concerned but I can recognise quality work when I see it and boy your work is truly superb what a beauty. Hat's off to you sir very inspirational indeed 👏 Thanks so much Andy very kind words..... and nice to hear my work inspires you. Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 5 minutes ago, M3talpig said: Thanks so much Andy very kind words..... and nice to hear my work inspires you. your welcome infact why I'm waiting for my first armour kit to arrive I've been looking through the different sections on here and the quality of the work on show is excellent. I must admit I'm quite excited at the prospect of trying something different, onwards and upwards methinks 🙂👍 1 Link to comment Share on other sites More sharing options...
Dads203 Posted September 30, 2020 Share Posted September 30, 2020 Testicalous Canineous matey first class work indeed, great attention to detail. love it 2 Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 1 minute ago, Dads203 said: Testicalous Canineous Can't believe I just googled this then I actually read it correctly 🙄😂🤣 4 Link to comment Share on other sites More sharing options...
M3talpig Posted September 30, 2020 Author Share Posted September 30, 2020 28 minutes ago, Andy J said: your welcome infact why I'm waiting for my first armour kit to arrive I've been looking through the different sections on here and the quality of the work on show is excellent. I must admit I'm quite excited at the prospect of trying something different, onwards and upwards methinks 🙂👍 What is your normal bent when putting tools to plastic ....armour is a lot of fun and you can make some fairly horrible mistakes and still end up with something stunning.....what have you got coming Andy....and don't forget to start a build thread 1 Link to comment Share on other sites More sharing options...
M3talpig Posted September 30, 2020 Author Share Posted September 30, 2020 23 minutes ago, Andy J said: Can't believe I just googled this then I actually read it correctly Dogs danglies...only far more educated version ........ class act all the way Dan as always 1 Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 Just now, M3talpig said: Dogs danglies...only far more educated version ........ class act all the way Dan as always Above my pay grade im afraid 🙂 2 Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 5 minutes ago, M3talpig said: What is your normal bent when putting tools to plastic ....armour is a lot of fun and you can make some fairly horrible mistakes and still end up with something stunning.....what have you got coming Andy....and don't forget to start a build thread For quite a while now I've been building 1/24 car kits but I need a new focus. This is the kit I have ordered infact it should land tomorrow and I've also got a paint set on it's way. Hopefully the paint is a good choice it certainly looks like a decent set 🤔 As for the build thread well I wasn't sure tbh but to hell with it, why not I'm pretty sure i will be asking for advice along the way and if nothing else you can all have a giggle at me fannying around with bits of plastic 🙂 2 Link to comment Share on other sites More sharing options...
M3talpig Posted September 30, 2020 Author Share Posted September 30, 2020 (edited) 4 minutes ago, Andy J said: As for the build thread well I wasn't sure tbh but to hell with it, why not I'm pretty sure i will be asking for advice along the way and if nothing else you can all have a giggle at me fannying around with bits of plastic 🙂 Two excellent choices...please do a thread tag me and i will follow along...can't wait to see what you do with it...as for the paint you couldn't have chosen better Mig and AK are the benchmark for armour paint Edited September 30, 2020 by M3talpig Link to comment Share on other sites More sharing options...
Longbow Posted September 30, 2020 Share Posted September 30, 2020 Superb job, Steve !! Just superb !! 19 minutes ago, Andy J said: For quite a while now I've been building 1/24 car kits but I need a new focus. This is the kit I have ordered infact it should land tomorrow and I've also got a paint set on it's way. Hopefully the paint is a good choice it certainly looks like a decent set 🤔 As for the build thread well I wasn't sure tbh but to hell with it, why not I'm pretty sure i will be asking for advice along the way and if nothing else you can all have a giggle at me fannying around with bits of plastic 🙂 Wonderful choice in kits !! And yes, start a build thread, that way if you need help with something the guys here can easily help you. 1 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted September 30, 2020 Share Posted September 30, 2020 1 hour ago, Andy J said: I have a lot to learn where armour builds are concerned but I can recognise quality work when I see it and boy your work is truly superb what a beauty. Hat's off to you sir very inspirational indeed 👏 For Gods sake mate don't encourage him, he's a megalomaniac at the best of times last thing we need is "The Big I Am" getting over excited again!! After that cautionary note, great choice of a kit, and remarkable value at the moment ! No doubt you'll enjoy it... Atb Darryl 3 Link to comment Share on other sites More sharing options...
Jasper dog Posted September 30, 2020 Share Posted September 30, 2020 Looking fairly good now fella! Do like the displaced ranging poles, could have even done those red and white mind.... Don't need to tell me the virtues of green stuff these days btw! Preaching to the converted! Aren't you concerned what you might do with yourself if you get it finished too soon, what with the Panther GB not starting till 10/10??? Just saying... 1 Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 2 minutes ago, Jasper dog said: Looking fairly good now fella! Hmm now I see where you're coming from regarding encouragement duly noted 😉 3 Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 1 hour ago, M3talpig said: Two excellent choices...please do a thread tag me and i will follow along...can't wait to see what you do with it...as for the paint you couldn't have chosen better Mig and AK are the benchmark for armour paint I certainly will be doing a build thread but I have no idea what ' tag me " means ? 🤔 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted September 30, 2020 Share Posted September 30, 2020 Just now, Andy J said: I certainly will be doing a build thread but I have no idea what ' tag me " means ? 🤔 See, see me me me..... Give him an inch and all that! I'd assume he means he'll follow along...I'm beginning to sound like the "BIA" pa! 2 Link to comment Share on other sites More sharing options...
Andy J Posted September 30, 2020 Share Posted September 30, 2020 1 minute ago, Jasper dog said: ..I'm beginning to sound like the "BIA" pa! Here we go again 🙄 I have no idea what this means unless BIAPA is a new striker at Chelsea maybe 🤔 2 Link to comment Share on other sites More sharing options...
Longbow Posted September 30, 2020 Share Posted September 30, 2020 30 minutes ago, Andy J said: Here we go again 🙄 I have no idea what this means unless BIAPA is a new striker at Chelsea maybe 🤔 I thought BIPA was an Indian Pale Ale... Shows how much I know 3 Link to comment Share on other sites More sharing options...
Jasper dog Posted September 30, 2020 Share Posted September 30, 2020 32 minutes ago, Andy J said: Here we go again 🙄 I have no idea what this means unless BIAPA is a new striker at Chelsea maybe 🤔 Apologies, BIA (Big I Am) young Steve as I've just christened him and PA is a PA. Striker isn't that a modern Canadian AFV... 2 minutes ago, Longbow said: I thought BIPA was an Indian Pale Ale... Shows how much I know One is rather fond of an IPA.... now theres a thought for the evening... 1 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now