Jur Posted September 3, 2020 Share Posted September 3, 2020 Having completed (and very much enjoyed) my 1/72 model of the Savoia-Marchetti S.21 flying boat from the animated film Porco Rosso, I ordered the companion kit of the Curtiss R3C, also by Fine Molds. This is the plane flown by Porco's adversary, the brash American Donald Curtiss. It is an 'unauthorised' version (according to the instructions) of the well known racing floatplane from the 1920's - 'unauthorised' presumably referring to the twin machine guns mounted on the fuselage sides. Apart from those, and the addition of a beefy chin radiator, the plane looks quite faithful to the original. The plane in the film looks like this, here flying side by side with Porco's S.21: And here we see Donald Curtiss himself standing next to Porco (Marco Pagot): =============================================== The kit arrived from Japan in a sturdy box, with on the lid a brief explanation of what this aircraft is all about: This is also pretty much the only English text in the kit since the instructions are almost entirely in Japanese. However, this is not a complicated kit and I don't think I will have problems following the diagrams. If the parts fit as well as they do on the S.21 I will have a good time. There are two sprues, a dark blue one with most of the parts of the aircraft, and a grey one with parts for the beach trolly and the flying display stand. The stand can be built to accommodate not just the Curtiss but also the S.21, something I will try out. There is also a tiny pilot figure, we'll see if I can manage to make it look like Donald Curtiss! There are decals for various liveries, I will opt for the one with the yellow bars on the wings. As an alternative, skull symbols are included if you want to show the plane as one of the 'Mamma Aiuto' Air Pirates fleet. A second decal sheet contains yellow decals for the undersides of the floats and the bars on the wings. You could opt to use these and not even paint anything and you'd get a reasonable representation of the original, but I will try to spray the various colours myself. The overall colour is a very dark blue (Midnight Blue?) with Intermediate Blue struts. Colour call-outs are given for Gunze paints but I will use Vallejo equivalents. So far I have just washed the sprues and ordered some paint. I'll make a start with the interior soon. 8 Link to comment Share on other sites More sharing options...
HOUSTON Posted September 3, 2020 Share Posted September 3, 2020 ooh Going to enjoy this although I am far far away from homeland. Splendid choice. Love Flying boats. I think this is going to be SO interesting to see. 1 Link to comment Share on other sites More sharing options...
Courageous Posted September 3, 2020 Share Posted September 3, 2020 Nice one Jur, I have the same kit but I was hoping to use the kit as the possible basis of the Curtiss R3C2 Schneider Racer, so I'll tag along and see how it all goes. Good luck. Stuart 2 Link to comment Share on other sites More sharing options...
Billy54 Posted September 3, 2020 Share Posted September 3, 2020 Glad to see that you are building the "companion" to the Savoia-Marchetti S.21, I shall be following this build with interest because you post has inspired me to also build a Curtiss R3C and I have just ordered one from Japan. My son is a Hayao Miyazak fan and I built him the Savoia-Marchetti S.21 some time ago. Once finished the Curtiss will sit next to his Savoia-Marchetti S.21. 1 Link to comment Share on other sites More sharing options...
opus999 Posted September 4, 2020 Share Posted September 4, 2020 This will be a lot of fun! 1 Link to comment Share on other sites More sharing options...
billn53 Posted September 4, 2020 Share Posted September 4, 2020 I was looking at this kit online yesterday, and now I see you are going to build it. Guess I won’t have to buy one after all (famous last words...) Link to comment Share on other sites More sharing options...
Orso Posted September 5, 2020 Share Posted September 5, 2020 I was expecting the Curtiss to be a Whif too when the S.21 didn't exist but was surprised to find that R3C was really a Curtiss. Link to comment Share on other sites More sharing options...
Jur Posted September 6, 2020 Author Share Posted September 6, 2020 First steps have been taken, for starters I primed everything with Stynylrez grey. I found the Fine Molds plastic of the S.21 kit very 'slippery' so hopefully this will help the top coats come on better. Next I sprayed white over the fuselage band and the areas to be painted yellow, and I sprayed the struts Intermediate Blue. Once that was dry I assembled the floats. There are plastic 'weights' included to be glued inside the floats, I presume to prevent tail-sitting. Next I applied a coat of yellow on the undersides of the floats, the rudder and the wing bands. I have given these areas a coat of gloss varnish before I will mask them in the hope of lessening the risk of taking up the paint when I remove the masking tape. Once this is dry I will get on with the cockpit and assemble the fuselage and top wing. 5 Link to comment Share on other sites More sharing options...
Jur Posted September 6, 2020 Author Share Posted September 6, 2020 I think that Donald (no, not that Donald) came out ok: 7 Link to comment Share on other sites More sharing options...
Jur Posted September 7, 2020 Author Share Posted September 7, 2020 I masked the wings and floats for the yellow and gave them a first coat of dark blue. I also gave the fuselage band another coat of white for better coverage, and then glued on the machine guns, the top wing, the empennage and the chin radiator: The fit of the parts is very good, I may use a bit of filler on the radiator sides but otherwise no problems. Tonight I'll mask the fuselage band and varnish the edges to (hopefully) prevent bleeding. Tomorrow I should then be able to spray the overall dark blue and give the wings and floats a second coat. There is some cockpit detail but not much of it will be visible once the Donald takes his place: So far this is a quick and straightforward build. I had never heard of Fine Molds before I came across their Porco Rosso kits and I must say they are excellent quality. Here is a nice picture of Jimmy Doolittle with his Curtiss: (By LARC/photographer unknown - Great Images in NASA Description, Public Domain, https://commons.wikimedia.org/w/index.php?curid=510366) I'll have some rigging to do! 9 Link to comment Share on other sites More sharing options...
John Masters Posted September 7, 2020 Share Posted September 7, 2020 This is very fun indeed...and a fine build too! 1 Link to comment Share on other sites More sharing options...
Courageous Posted September 7, 2020 Share Posted September 7, 2020 Coming together nice and quick. looking good so far. Stuart 1 Link to comment Share on other sites More sharing options...
Jur Posted September 8, 2020 Author Share Posted September 8, 2020 Thanks guys for all your nice comments! This is a nice little model (and little it is, it literally fits in the palm of my hand) and I'm enjoying the build. Today I sprayed the blue topcoat. As always, my masking was less than perfect. The wing bands came out ok, they are basically flat, but the fuselage band had some overspray near the spine. With multiple curves that is a difficult area to mask. Also the floats, these are compund curves that beat my masking tape, but the damage is on the underside and if I don't show a picture here, nobody is going to see it Even so, things are not too bad and I have touched up as good as I can. 6 Link to comment Share on other sites More sharing options...
billn53 Posted September 8, 2020 Share Posted September 8, 2020 Have you tried Tamiya’s masking tape for curves? It does a pretty good job on compound surfaces. Link to comment Share on other sites More sharing options...
Jur Posted September 8, 2020 Author Share Posted September 8, 2020 Yes, I do have it but for some reason I used the ordinary Tamiya tape here. Note to self: think before masking Link to comment Share on other sites More sharing options...
Jur Posted September 10, 2020 Author Share Posted September 10, 2020 Nearly there now, I glued everything together, then applied the decals and the more internal rigging wires (from steel guitar string) and finally gave the whole thing a coat of matt varnish: All that is left to do is add some further rigging wires that are more on the outside. I left those for last because they could easily be damaged by handling. Oh yes, the prop is still loose too. Will be fixed. The stand is a bit too small to display both planes at the same time, they are practically flying into each other. I will use it to just display the Curtiss on its own. Perhaps I can fabricate something a bit larger for both planes together (but it won't be a great ape this time ) 7 Link to comment Share on other sites More sharing options...
Kes Posted September 10, 2020 Share Posted September 10, 2020 Brilliant! I had no idea such things existed! I do enjoy aviation obsessed Hayao Miazaki's 'Studio Ghibli' note my avatar, not in a small way inspired of 'The Wind Rises' (2013) 1 Link to comment Share on other sites More sharing options...
Jur Posted September 12, 2020 Author Share Posted September 12, 2020 Thanks guys. The model is now complete: More in RFI: 5 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now