trickyrich Posted August 31, 2020 Share Posted August 31, 2020 Oh dear god has this one come around already!!! Well there’ll be no guarantee that this one will get finished…..though it is the 2nd last planned build of the year and work maybe getting back to my normal away/home schedule….. Ok I really wanted to build a Tiger Meet Tornado and…….. well this came up for a very reasonable price and I liked the scheme a lot.....gee she's a big sucker! The box disappeared a few minutes after the model arrived along with all the bits not needed for the build…….then the leftover went into a much smaller/stronger/suitable box for my Tamiya F-14D! The only…for now….planned extras is a new cockpit. I’ll be using the Aires IDS one, but I think there’s only a couple of minor changes I need to do to it to make it suitable. That’s if anyone would notice! I may get some metal U/c legs as well….need to go shopping in evilBay The decal sheet was huge…just like the silly box Revell likes to use. The only unfortunate thing with the decals is that they are a bit old and yellowy. Though I have a backup plan, I have another set of decals from the later release of this model…..though the scheme isn’t quite as nice. I final fallback plan is the “Lego Tiger Meet” scheme, this one just uses masks…..I love masking! Oh and the Yellow used in these schemes is a special colour of course and only produced by Revell and almost impossible to find here. I planned to just by 1 pot from overseas but somehow managed to buy 4….well at least I won’t run out! I’m hoping to get this one done, I’ve dropped a planned build, MTO and the MiG-25/31 STGB isn’t till December so I’ll see how it goes……least there’s no mod work needed with this one. 10 Link to comment Share on other sites More sharing options...
Christer A Posted August 31, 2020 Share Posted August 31, 2020 You only have a resin pit? Where are the wheel wells? New Exhaust? Wheels? Flat brass? Turned brass? Cast brass? It's like we don't recognize you anymore... I must say that the first decal option looks ace! 2 4 Link to comment Share on other sites More sharing options...
trickyrich Posted August 31, 2020 Author Share Posted August 31, 2020 2 hours ago, Christer A said: You only have a resin pit? Where are the wheel wells? New Exhaust? Wheels? Flat brass? Turned brass? Cast brass? It's like we don't recognize you anymore... I must say that the first decal option looks ace! wheels, new U/c legs, exhausts, and probes are in the out box of my evilBay.......just one click away! I'm trying to resist for a couple of days....as I've just bought the new Zoukei-Mura F-4E from Japan!!!! I can't have them all show up at once as it's too hard to explain! 4 Link to comment Share on other sites More sharing options...
Mig Eater Posted August 31, 2020 Share Posted August 31, 2020 I'm jealous the Tigermeet 01/02 is my favourite Tonka but that kit is really hard to find now days, I look forward to seeing the build 😃 1 Link to comment Share on other sites More sharing options...
trickyrich Posted August 31, 2020 Author Share Posted August 31, 2020 22 minutes ago, Mig Eater said: I'm jealous the Tigermeet 01/02 is my favourite Tonka but that kit is really hard to find now days, I look forward to seeing the build 😃 I have noticed that, am so glad I got it when I could. There are some around but they're going for silly money! Link to comment Share on other sites More sharing options...
modelling minion Posted August 31, 2020 Share Posted August 31, 2020 Don't you have enough to do already without starting this beast? It is a very striking scheme though. 2 Link to comment Share on other sites More sharing options...
Marlin Posted August 31, 2020 Share Posted August 31, 2020 Nice choice Rich. I'll be tagging along. And I can promise you some tasty BBQ pics in my own Tornado thread. /Bosse. 1 Link to comment Share on other sites More sharing options...
stevej60 Posted August 31, 2020 Share Posted August 31, 2020 Magnificent beast Rich and it looks a lot less complicated than my 1/48 kit! 1 Link to comment Share on other sites More sharing options...
trickyrich Posted September 1, 2020 Author Share Posted September 1, 2020 22 hours ago, Marlin said: Nice choice Rich. I'll be tagging along. And I can promise you some tasty BBQ pics in my own Tornado thread. /Bosse. Oooo I look forward to that.....have missed your treats!!! 13 hours ago, stevej60 said: Magnificent beast Rich and it looks a lot less complicated than my 1/48 kit! I had planned to get the 1/48th version but I found the 1/32nd one for just a wee bit more so couldn't resist. I know the 1/48th version can be "interesting" with the fuselage fit. I will be following your build to see the SteveJ magic on this one! 1 Link to comment Share on other sites More sharing options...
Hockeyboy76 Posted September 1, 2020 Share Posted September 1, 2020 Another one for the top shelf? Good luck dude. 1 Link to comment Share on other sites More sharing options...
speedy Posted September 1, 2020 Share Posted September 1, 2020 You’re gonna need shares in Microsoft/set!🤪 1 Link to comment Share on other sites More sharing options...
trickyrich Posted September 2, 2020 Author Share Posted September 2, 2020 19 hours ago, Hockeyboy76 said: Another one for the top shelf? Good luck dude. at the moment this is very much line-ball! But there's a very good chance I maybe going back to my old 15/13 day roster (13 days off), I haven't done those for quite sometime! Last time I worked those shifts I built (and completed) over 10 models that year, all 1/48th, so have everything crossed that I do again! 1 Link to comment Share on other sites More sharing options...
Colin W Posted September 3, 2020 Share Posted September 3, 2020 Sounds like a well thought out plan Rich. I knew you would succumb to the call of the resin. Its been a while since the Viggen so you must be missing the masking. I think masking the Lego Tonka must have been hard enough on the rel thing but I'm sure a man like you could manage it! Colin W 1 Link to comment Share on other sites More sharing options...
Enzo the Magnificent Posted September 3, 2020 Share Posted September 3, 2020 On 31/08/2020 at 02:18, trickyrich said: and the MiG-25/31 STGB isn’t till December Have I missed something here? 3 Link to comment Share on other sites More sharing options...
trickyrich Posted September 3, 2020 Author Share Posted September 3, 2020 Arrr Interceptor....... same thing! 3 Link to comment Share on other sites More sharing options...
Enzo the Magnificent Posted September 3, 2020 Share Posted September 3, 2020 9 minutes ago, trickyrich said: Arrr Interceptor....... same thing! But it starts in November. 2 Link to comment Share on other sites More sharing options...
trickyrich Posted September 3, 2020 Author Share Posted September 3, 2020 But November/December all the same.....a bit off and no need to panic quite yet!! Link to comment Share on other sites More sharing options...
CliffB Posted September 4, 2020 Share Posted September 4, 2020 I'm long overdue a dose of @trickyrich 2 Link to comment Share on other sites More sharing options...
trickyrich Posted September 4, 2020 Author Share Posted September 4, 2020 I am looking forward to starting this one....just need to get the "Albatross" the MH-60L done first. I'm about to go shopping on evilBay for a few .... extras! This is actually the simplest build of the current and 3 planned builds. I do have one request...does anyone have a good picture of the backseat IP of an ECR? There are plenty of the IDS version, But I need to see the exact differences between the IDS and ECR version as I know I need to do a few changes and It would be nice to get them right.......not that many would notice! 1 Link to comment Share on other sites More sharing options...
exdraken Posted September 6, 2020 Share Posted September 6, 2020 In my opinion this one of the best Tigermeet schemes of all time and of course on Tornado! Unfortunately not existing in 48th... Will have a look at my resources regarding the early ERC cockpit... but can't promise much... EIDT: quite an elusive cockpit seems that Eduard is quite correct with their suggestion though: https://www.eduard.com/out/pictures/1/fe523.gif https://www.eduard.com/out/media/fe523.pdf 1 1 Link to comment Share on other sites More sharing options...
JayBee Posted September 6, 2020 Share Posted September 6, 2020 Maybe for inspiration. 2 Link to comment Share on other sites More sharing options...
trickyrich Posted September 8, 2020 Author Share Posted September 8, 2020 This is another build I have made a tentative start to, just done some of the simple stuff to get it underway. I started to build up all the stores, I am really pleased with the way everything fits together nicely, plus the detail is great. Gosh that tail is huge!!!!! I reckon they should have gone with the twin tail setup like the Tomcat, would have looked cool………maybe a good Whiffy idea! The intakes aren’t too bad, building up now will mean I can get the insides sorted. The only issue is that there is now intake trunking, the intake finish with this section then a huge hole!! Not what I would have expected on a 1/32nd beast!!! I may have a go at cobbling something together, I’ll see how I’m going with time. There are some nasty injection makes on the intake plate! Comparing the 2 rear cockpits there’s hardly any noticeable difference between the plastic ECR and resin IDS one. There are a couple of minor changes, for the sake of a simpler build I may just leave the resin one as is….other than a “plane spotter” no one will be able to tell the difference! The front seat panel is much nicer! Just sitting there she’s huge!! It’s my first 1/32nd jet….heaven forbid I start buying more….will need a bigger room. So far the fit has been a huge surprise, Revell’s done a great job…now if they would just fix their boxes! Finally I have been shopping…… got new resin exhausts, new resin wheels, plus some nice metal U/c (the lower section, they also do the upper mains). Now I just need to pull my finger out an finish that chopper! 9 Link to comment Share on other sites More sharing options...
Marlin Posted September 8, 2020 Share Posted September 8, 2020 Great start Rich. I like the resin pit. I think I'll order one for my huge stash/list of unstarted IDS's /Bosse 1 Link to comment Share on other sites More sharing options...
trickyrich Posted September 8, 2020 Author Share Posted September 8, 2020 I think you'll like the model, so far everything looks like it'll all go together without too many issues, though I'll wait to see what the main joins will be like! Link to comment Share on other sites More sharing options...
Christer A Posted September 9, 2020 Share Posted September 9, 2020 Totally correct decision to get all this resin goodies! No air brakes in resin ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now