Ozzy Posted September 13, 2020 Author Share Posted September 13, 2020 Im going to stop for the day, as I've nearly finished the first jeep in just over an hour at the bench. As you can see typical Tamiya goes together with no problems. 10 Link to comment Share on other sites More sharing options...
AdrianMF Posted September 13, 2020 Share Posted September 13, 2020 Wow, this is like a one man GB starting with a Blitzbuild to warm up... Looking forward to this! Regards, Adrian 2 1 Link to comment Share on other sites More sharing options...
Ozzy Posted September 13, 2020 Author Share Posted September 13, 2020 4 minutes ago, AdrianMF said: Wow, this is like a one man GB starting with a Blitzbuild to warm up... Looking forward to this! Regards, Adrian Thanks Adrian, i had to tell myself to stop this afternoon, otherwise I would have had the other one built. There does look a fair bit to do, I won't build all the figures as the jeeps were either crewed by 3 or 4 men. I'm looking forward to starting the Ju 87, as I get to do 2 different paint schemes. 1 Link to comment Share on other sites More sharing options...
Ozzy Posted September 13, 2020 Author Share Posted September 13, 2020 A picture paints a thousand words, below is the rough outline of my build the cutting mat is 45x 30cm so 10cm shorter than the actual base. The second jeep is one I made a few years ago, not one I knocked up today 😀. I'm pleased that it all fits and I've got plenty of space for barrels and bombs and SAS men running around planting charges. 13 Link to comment Share on other sites More sharing options...
Valkyrie Posted September 14, 2020 Share Posted September 14, 2020 Great work Ozzy I like the plan 1 Link to comment Share on other sites More sharing options...
Ozzy Posted September 15, 2020 Author Share Posted September 15, 2020 7 hours ago, Valkyrie said: Great work Ozzy I like the plan Thanks Valkyrie, ive just got to work out the lighting plan, I picked up some plywood on Sunday to cut for the sides and lid for the project. 1 Link to comment Share on other sites More sharing options...
DaveyGair Posted September 15, 2020 Share Posted September 15, 2020 You're not a TV/Film set designer on the side are you Ozzy? I remember a trip to Belfast, my dad in the RAF being based at Bishopscourt, in 1972 I think, and looked in to a model shop, the SAS jeep must have just come out and I didn't have enough to buy it but his mate gave me the extra 50p or something to get it. Great little kit. Davey 2 Link to comment Share on other sites More sharing options...
Ozzy Posted September 15, 2020 Author Share Posted September 15, 2020 5 hours ago, DaveyGair said: You're not a TV/Film set designer on the side are you Ozzy? I remember a trip to Belfast, my dad in the RAF being based at Bishopscourt, in 1972 I think, and looked in to a model shop, the SAS jeep must have just come out and I didn't have enough to buy it but his mate gave me the extra 50p or something to get it. Great little kit. Davey I’m not a film set designer 😁Davey, just had a bit to much time on my hands planning dioramas, I also believe this is my 5,000 post that we are sharing. The kit is fantastic definitely stood the test of time, I first picked one up a few years ago from a shop in the south of France. I built it as part of my local clubs blitz build. 1 Link to comment Share on other sites More sharing options...
Tim R-T-C Posted September 15, 2020 Share Posted September 15, 2020 For some reason I thought you were cutting the Stukas in half the other way which seemed like a lot of work, this makes much more sense! 1 1 Link to comment Share on other sites More sharing options...
Ozzy Posted September 15, 2020 Author Share Posted September 15, 2020 3 hours ago, Tim R-T-C said: For some reason I thought you were cutting the Stukas in half the other way which seemed like a lot of work, this makes much more sense! No worries Tim, I did think of that option originally but opted for the 2 halves, hopefully the canopy doesn’t crack when I cut it in half. 1 Link to comment Share on other sites More sharing options...
Ozzy Posted September 16, 2020 Author Share Posted September 16, 2020 Done a bit of fettling this evening, the driver is finished and the Gunner is armless at the moment. The Commander will be running towards the aircraft with a bag full of explosives. ive also been working out the lighting plan today. 11 Link to comment Share on other sites More sharing options...
Ozzy Posted September 19, 2020 Author Share Posted September 19, 2020 I've been doing a bit on the bus build, I've got a couple of coats of paint on first was olive drab and then light stone both Vallejo air. Hopefully I will get the figures finished tomorrow. 10 Link to comment Share on other sites More sharing options...
Ozzy Posted September 21, 2020 Author Share Posted September 21, 2020 I got sidetracked over weekend and built the top deck of the bus, I also managed to finish off the figures. url=https://postimg.cc/zHqJ9hXc][/url] 13 Link to comment Share on other sites More sharing options...
TonyOD Posted September 21, 2020 Share Posted September 21, 2020 Cracking job of the jeep. How do you manage to paint it when it's already assembled? 1 Link to comment Share on other sites More sharing options...
Ozzy Posted September 21, 2020 Author Share Posted September 21, 2020 9 minutes ago, TonyOD said: Cracking job of the jeep. How do you manage to paint it when it's already assembled? Thanks Tony, ive got an airbrush set on a low pressure, I did the olive drab undercoat so I didn't miss any with the light stone. 2 Link to comment Share on other sites More sharing options...
TonyOD Posted September 21, 2020 Share Posted September 21, 2020 1 minute ago, Ozzy said: Thanks Tony, ive got an airbrush set on a low pressure, I did the olive drab undercoat so I didn't miss any with the light stone. But how do you do the backs of the tyres and stuff? Isn't it awkward> 2 Link to comment Share on other sites More sharing options...
Ozzy Posted September 21, 2020 Author Share Posted September 21, 2020 3 minutes ago, TonyOD said: But how do you do the backs of the tyres and stuff? Isn't it awkward> The tyres, I brushed painted with a 00 brush it was a little bit fiddley doing the rear ones. On the second one I think I will keep them off and paint separately. 3 Link to comment Share on other sites More sharing options...
Ozzy Posted September 26, 2020 Author Share Posted September 26, 2020 ive been adding bits throughout the week, I've also rolled some cam nets and added some straps to be the packs. 7 Link to comment Share on other sites More sharing options...
AdrianMF Posted September 26, 2020 Share Posted September 26, 2020 Looks very dynamic! I love it when figures are doing something in a diorama, instead of sitting with their hands in their laps (like generations of Airfix pilots). Regards, Adrian Regards, Adrian 3 Link to comment Share on other sites More sharing options...
Ozzy Posted September 26, 2020 Author Share Posted September 26, 2020 37 minutes ago, AdrianMF said: Looks very dynamic! I love it when figures are doing something in a diorama, instead of sitting with their hands in their laps (like generations of Airfix pilots). Regards, Adrian Regards, Adrian Thanks Adrian, i do like adding figures and probably buy to many sets for the various arm and leg positions, I've got a few more figures to build for the second jeep and a few running around planting explosives. They seem a world away from the original Airfix figures pop'ed in as a young lad. Link to comment Share on other sites More sharing options...
Ozzy Posted September 27, 2020 Author Share Posted September 27, 2020 One down one to go. I finished off with a flory grime wash over layed with mig North Africa pigment. My club is doing a flash build next weekend so I may build the second one for that, 6 hours of modelling to finish a kit. 12 Link to comment Share on other sites More sharing options...
rob85 Posted September 27, 2020 Share Posted September 27, 2020 That’s some cracking work Ozzy! Love the weathering, you have really brought this to life. Rob 1 Link to comment Share on other sites More sharing options...
Ozzy Posted September 27, 2020 Author Share Posted September 27, 2020 12 minutes ago, rob85 said: That’s some cracking work Ozzy! Love the weathering, you have really brought this to life. Rob Thanks Rob, im really pleased with the weathering, I just need to wire up the LEDs to the twin guns. The LEDs I have flash so they will look like their firing. 2 Link to comment Share on other sites More sharing options...
Ozzy Posted October 4, 2020 Author Share Posted October 4, 2020 I've had a busy weekend, finished off the Miniart bus and took part in IPMS Salisburys flash mod. You get 6 hours to build and finish a kit, these are normally done in a hall but due to current rules we have been doing them virtually. I also found time to build a 1:1 scale chocolate cake. It it seems the pictures aren't in order but hopefully you get the drift. 12 1 Link to comment Share on other sites More sharing options...
TonyOD Posted October 4, 2020 Share Posted October 4, 2020 Blimey. That is impressive. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now