Jump to content

As a result of the close-down of the UK by the British Government last night, we have made all the Buy/Sell areas read-only until we open back up again, so please have a look at the announcement linked here.

This site uses cookies! Learn More

This site uses cookies!

You can find a list of those cookies here: mysite.com/cookies

By continuing to use this site, you agree to allow us to store cookies on your computer. :)

bianfuxia

Type 054A+ guided missile frigate - Chinese PLAN - 1/700

Recommended Posts

Well, I just learned that DC schools are closed now until next academic year. That's late August, early September. Working from home, and teaching the kid, was looking hard enough when we thought it would be for another month or so. Now we'll have no school, childcare or summer camp until September! And had we had a crystal ball - oh if only! - we'd have gone home to Australia where things are shaping up to be relatively back to normal much, much sooner than here in the US. 

 

So....why not crack out yet another ship from the stash? These late night sessions are all that winds my mind down enough to get to sleep.

 

This one is something I picked up a bit unwillingly when I was in China. I thought I was getting a PE set for my Type 071 amphibious warfare ship model kit, but by not paying enough attention one night on Taobao I ended up with the PE set for this instead. So then, I went and bought the kit! Now I'm glad I did because these Dream Model kits are great. I recently finished the Type 071 corvette and really enjoyed it. 

 

IMG_20200417_170040908.jpg

 

I painted the deck the other day before realizing I needed to start this in the GB. That's all I've done on it, and that isn't even finished.

 

IMG_20200417_011619289.jpg

 

The kit comes with a little PE too, separate to the additional set, and two great little resin parts for the self-defence guns. 

 

Here's a little about the real thing, for those not so familiar with the current fleet of the Chinese navy (the PLAN - People's Liberation Army Navy, which always sounds weird until you think of the USAAF and realize it's the same type of name). 

 

China has 30 of these frigates, plus two of the earlier Type 054 (as opposed to 054A). From #17 they got the A+ designation following an upgrade to some systems and the close-in guns. 

 

Remember the Malaysian 777 that was shot down? This ship has that same missile system, the "Buk", with 32 missiles, plus 8 anti-surface missiles of about 180-200km range, a 3 inch (76mm) gun, twin CIWS as well as torpedoes and anti-sub rockets. There's a hangar and flight deck for one Z-9 which is basically modelled on the Aerospatiale Dauphin.

 

At 4,000 tonnes and 134 meters long it's lighter than, but the same size as, a Type 23 frigate of the Royal Navy, but with a far more capable SAM system than Sea Wolf or Sea Ceptor - the Chinese ship's "Buk" system has a range of out to 75km (depending on the source) but at least 35km, compared to 25km for Sea Ceptor and just 10km for Sea Wolf.

 

Anyway, I'll use some of the PE in this build but not all of it. Sometimes I think PE sets are really just overkill - for example, this one has you folding tiny bits of brass to make up the launcher boxes for the SSMs, which I can guarantee in my hands will look a lot worse than the injection moulded parts. I'll use the railings and antennae and other parts that will look better, though.

 

Might take me a while to get started on this one, but I'm sure I'll make some good headway on it before June.

 

I'm going to do pennant number 579 which is the 邯郸 Handan. Handan is a provincial city which was once - a very long time ago (550-577AD) - the site of the capital of the short-lived Northern Qi dynasty. When in Beijing I was fascinated with that dynasty and always wanted to visit Handan. But I never made it. 

 

 

 

 

Share this post


Link to post
Share on other sites

This looks another great subject! Looking forward to it progress.

 

Rob

Share this post


Link to post
Share on other sites

I've been painting this lately and not putting pics up, but tonight I did some basic construction. 

 

IMG_20200425_233355596.jpg

 

IMG_20200425_233515435.jpg

 

You can see there's some work to do on the main hull - the frigate has the stealthy design on the side there which means there's that inevitably seam along an angled edge. Not sure what to do about that. Fudge it I guess. I usually prefer not to have to use putty and sanding on ship models - one reason I enjoy them is there's less of that that's truly necessary compared to an aeroplane (at least to my mind and at least with the Japanese kits I usually do). But that bow area obviously needs some remedial work.

 

Meanwhile, here's two other views to show what nice lines the ship has.

 

IMG_20200425_233414845.jpg

 

IMG_20200425_233458491.jpg

 

The PE set I bought for this is already shaping up to be a disappointment. It won't take the paint at all, it's kind of floppy and a lot of it is total overkill.

 

One clear example is the VLS missile tubes there. The PE instructions would have you remove that plastic, then replace it all with PE. Um, no way. So I guess I will use it for the railings and some of the antenna. 

 

Anyway, though started, this one clearly has a way to go.

 

The colours, meanwhile, are unusually accurate for me. I bought the Dream Model PLAN paint set when I bought this. The deck is SP303 PLAN Deck Grey. The rest is SP301 PLAN Pale Grey. The paint is quite nice, not as good as my preferred Vallejo for brush-painting but looks nice with a few coats.

 

 

Share this post


Link to post
Share on other sites

Here comes the fun part, hahaha:

IMG_20200428_233641578.jpg

 

So much for choosing all these ships because you can get away without lots of sanding (in my no-garden small apartment iso state...)

Share this post


Link to post
Share on other sites
On 4/18/2020 at 6:34 AM, bianfuxia said:

we'd have gone home to Australia

Gidday Bianfuxia, what bit are you from? I'm from the west bit. And our schools re-opened today, although attendance is not compulsory for the students.

 

Good luck with the sanding. Regards, Jeff.

Share this post


Link to post
Share on other sites
3 hours ago, ArnoldAmbrose said:

Gidday Bianfuxia, what bit are you from? I'm from the west bit. And our schools re-opened today, although attendance is not compulsory for the students.

 

Good luck with the sanding. Regards, Jeff.

East coast, the capital, born and bred. But we've been away a long time (since 2005). I'm trying hard to extricate us from DC but I'll probably have to wait until my current contract is up at the end of the year. 

Share this post


Link to post
Share on other sites
Posted (edited)

Well it's been a couple of weeks on this one. Today I persuaded the kid to sit on the stoop out front with me and do some sanding. I gave her something else to sand while I did this one. It's not perfect but it's good enough. 

 

I then painted one coat on it, but it needs more as this paint is pretty thin. 

 

Also a couple of shots of the really neat little close-in self defence guns. These resin parts came with the kit, which is cool.

 

IMG_20200520_223523433.jpg

 

IMG_20200520_222713228.jpg

 

That's a typical small cutter blade thing there, not a big one. These guns are very small.

 

 

IMG_20200520_222246838.jpg

 

IMG_20200520_222303504.jpg

 

 

Edited by bianfuxia

Share this post


Link to post
Share on other sites

I decided I did want to re-do some of the putty along the side of the ship in one or two spots, so I've done that now and it's waiting to be sanded. Meanwhile, I started adding some of the PE set. As I think I mentioned above, I am not going to do it all, and especially not the parts where it requires first to sand off the existing detail just to replace it with PE. Also, those little resin guns up there - the PE set wants you to basically build those out of folded up PE. Um, no. 

 

I've done a bit of PE before but only really railings and antennae. This one has ladders, doors, and other stuff, and I have to say I'm not yet convinced it's going to be worth the effort. But I'll give it a go before I decide either way.

 

IMG_20200523_235701919.jpg

 

IMG_20200525_001328259.jpg

 

IMG_20200525_001311215.jpg

 

IMG_20200525_001257068.jpg

 

IMG_20200523_235823865.jpg

 

I know some of it looks a bit messy - it's not easy! (For me, anyway)

Share this post


Link to post
Share on other sites

I like the tiny PE doors, although small really improve the look of the model.

 

AW

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...