Giorgio N Posted August 27, 2020 Share Posted August 27, 2020 3 hours ago, Robertone139 said: I believe that Sword released a very nice T-38 in 1/72 scale They did, although very nice is IMHO a bit optimistic. It's a short run kit, with a lot of resin used for most details. Not the easiest build of all and worse of all almost impossible to find, especially in the T-38A box (the C is slightly easier). It's easier and often cheaper to get the 1/48 Wolfpack kit, and that sure is a very nice kit. Link to comment Share on other sites More sharing options...
Homebee Posted September 14, 2020 Author Share Posted September 14, 2020 (edited) Source: https://www.facebook.com/story.php?story_fbid=3345092452250603&id=554818677944675 Quote We are in a hurry to build the new mold 1/72 F-5E/F Tiger II. This kit included More accurate fuselage and wing shapes. Two types of ejection seats (Early & Late) Detailed cockpit and instrument panels included various variations AIM-9P/L, ACMI Pod and Mk.82 Bombs Two types of external fuel tanks Air brake open/close selectable Two nose shapes (Normal/Shark nose) and LEX, extended vertical wing We're targeting a retail price of $24 USD (20 Euro) for the basic version. We will also build an improved F-5E/F in the next stage. We should notice news for it soon. V.P. Edited September 14, 2020 by Homebee 11 Link to comment Share on other sites More sharing options...
Teeradej Posted September 14, 2020 Share Posted September 14, 2020 Very good news they still move on in spite of recent Dreammodels release. Can’t wait! Link to comment Share on other sites More sharing options...
Mountain goat Posted September 14, 2020 Share Posted September 14, 2020 2 hours ago, Homebee said: We are in a hurry to build the new mold 1/72 F-5E/F Tiger II. This kit included More accurate fuselage and wing shapes. Two types of ejection seats (Early & Late) Detailed cockpit and instrument panels included various variations AIM-9P/L, ACMI Pod and Mk.82 Bombs Two types of external fuel tanks Air brake open/close selectable Two nose shapes (Normal/Shark nose) and LEX, extended vertical wing We're targeting a retail price of $24 USD (20 Euro) for the basic version. Wolfpack is now on a Competition Intercept Course, and closing. Good stuff! Jay Link to comment Share on other sites More sharing options...
Vultures1 Posted September 14, 2020 Share Posted September 14, 2020 Liking the look of this! I can see a few of these heading my way 🙂 Link to comment Share on other sites More sharing options...
ivand Posted September 14, 2020 Share Posted September 14, 2020 On 4/17/2020 at 5:44 AM, Jackman said: Pretty much a license to print money for Wolfpack. Yes, at their announced retail price, they'll manage to keep a lot of buyers away from the Dream Model kit! I hope they'll manage to offer it at that price. 2 Link to comment Share on other sites More sharing options...
CT7567 Posted September 15, 2020 Share Posted September 15, 2020 On 9/14/2020 at 12:34 AM, Mountain goat said: Wolfpack is now on a Competition Intercept Course, and closing. "MiG-28s -- No one's been this close before!" 😎 4 Link to comment Share on other sites More sharing options...
spaddad Posted September 15, 2020 Share Posted September 15, 2020 18 hours ago, ivand said: Yes, at their announced retail price, they'll manage to keep a lot of buyers away from the Dream Model kit! I hope they'll manage to offer it at that price. That will largely depend on who the importers turn out to be. Link to comment Share on other sites More sharing options...
ivand Posted September 15, 2020 Share Posted September 15, 2020 Mmmmyes, IIRC their esci F-5 rebox wasn't exactly cheap... 🤔 1 Link to comment Share on other sites More sharing options...
Eric B. Posted September 15, 2020 Share Posted September 15, 2020 On 8/27/2020 at 11:06 PM, Giorgio N said: They did, although very nice is IMHO a bit optimistic. It's a short run kit, with a lot of resin used for most details. Not the easiest build of all and worse of all almost impossible to find, especially in the T-38A box (the C is slightly easier). It's easier and often cheaper to get the 1/48 Wolfpack kit, and that sure is a very nice kit. Modeller already jumped to the next wish, I have been hoping for a new tool F-5E/F for years (with Wolfpack high on my expectation list), now hoping Wolfpack would scale down their 1/48th T-38s to 1/72nd scale. Regards Eric B. 2 Link to comment Share on other sites More sharing options...
Homebee Posted September 27, 2020 Author Share Posted September 27, 2020 Source: https://www.facebook.com/wolfpackd/posts/3390057447754103 Quote We are also making 1/72 F-5F Tiger II. In addition to the basic type, our design is considering separate for various improved variations in various countries. We should design for the improved F-5E/F, example HUD-equipped Glare shield, New instrument panels, Refueling probe and various additional antennas. Also consider to extend RF-5E variations too. V.P. 5 Link to comment Share on other sites More sharing options...
SharkOwl Posted April 14, 2021 Share Posted April 14, 2021 Any news about this Wolfpack Design project ? 🙂 SharkOwl 5 Link to comment Share on other sites More sharing options...
-Ian- Posted October 1, 2021 Share Posted October 1, 2021 ^^^^^^^^^^^^^ What SharkOwl said Hopefully this will come to fruition, based on comments so far I'm thoroughly unenthused by the DreamModel offering. 1 Link to comment Share on other sites More sharing options...
SharkOwl Posted November 24, 2021 Share Posted November 24, 2021 Any news about this project from Wolfpack Design ? 🙂 SharkOwl Link to comment Share on other sites More sharing options...
Violet Club Posted November 24, 2021 Share Posted November 24, 2021 Ah, if only this kit could be as nice and accurate as the ESCI/Italeri F-5A in 1/72 ! 1 Link to comment Share on other sites More sharing options...
Trenton guy Posted November 25, 2021 Share Posted November 25, 2021 22 hours ago, Violet Club said: Ah, if only this kit could be as nice and accurate as the ESCI/Italeri F-5A in 1/72 ! And the Wolfpack Buckeye! 1 Link to comment Share on other sites More sharing options...
Wez Posted November 25, 2021 Share Posted November 25, 2021 On 24/11/2021 at 16:50, Violet Club said: Ah, if only this kit could be as nice and accurate as the ESCI/Italeri F-5A in 1/72 ! And include the canopy actuating mechanism... 2 Link to comment Share on other sites More sharing options...
Smudge Posted December 13, 2021 Share Posted December 13, 2021 On 25/11/2021 at 21:03, Wez said: And include the canopy actuating mechanism... Yes, that would be the icing on the F-5 cake. So obvious when the canopy is open, which it would be nice to do On 14/04/2021 at 10:33, SharkOwl said: Any news about this Wolfpack Design project ? 🙂 Is there any news? 1 Link to comment Share on other sites More sharing options...
Homebee Posted July 20, 2022 Author Share Posted July 20, 2022 Source: https://www.facebook.com/wolfpackd/posts/pfbid02s98ywqsEWJgP3Boni7dkHgM5y4UkPJCjToDTbbfmGAKaMdJZBSbLMJUxsdo7AzW8l Quote We are in the final design oversight of the 1/72 F-5E/F Tiger II kit. It was very late because I completed some product design requests of another company first. After ordering mold making for 1/72 F-5E/F, we will also announce 3D design of new product soon. V.P. 15 2 Link to comment Share on other sites More sharing options...
Borisz Posted July 20, 2022 Share Posted July 20, 2022 14 hours ago, Homebee said: Source: https://www.facebook.com/wolfpackd/posts/pfbid02s98ywqsEWJgP3Boni7dkHgM5y4UkPJCjToDTbbfmGAKaMdJZBSbLMJUxsdo7AzW8l V.P. I woder how its going to be compared to the Dream Model kit. Link to comment Share on other sites More sharing options...
MikeR Posted July 20, 2022 Share Posted July 20, 2022 From what can be seen in that last CAD image, considerably better. Mike. 3 Link to comment Share on other sites More sharing options...
Homebee Posted July 21, 2022 Author Share Posted July 21, 2022 Source: https://www.facebook.com/wolfpackd/posts/pfbid02LosbnJUsEvEhAtvMJp3mXpT86EE76CDUWqHjDQ7nx9ypBGmFVFXZf1GCfjGNvmU9l Quote We are in the final design oversight of the 1/72 F-5E/F Tiger II kit. This is a 3D modeling for the US Navy and US Marine Corps F-5N, including the CATM-9 and ACMI Pod. We are considering many options and variations such as basic Radome and Shark Nose types, LEX, AOA mounting directions, Extended Tail Fin, Antennas, External fuel tanks and Refueling Probe. V.P. 10 1 Link to comment Share on other sites More sharing options...
Hook Posted July 21, 2022 Share Posted July 21, 2022 That does look rather fetching. Link to comment Share on other sites More sharing options...
Smudge Posted July 21, 2022 Share Posted July 21, 2022 Awesome. Amazing. Can't wait to get a few of these Link to comment Share on other sites More sharing options...
drake122 Posted July 21, 2022 Share Posted July 21, 2022 Extended tail fin, IFR probe... looks like it will be worth the wait. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now