Jump to content

As a result of the close-down of the UK by the British Government last night, we have made all the Buy/Sell areas read-only until we open back up again, so please have a look at the announcement linked here.

This site uses cookies! Learn More

This site uses cookies!

You can find a list of those cookies here: mysite.com/cookies

By continuing to use this site, you agree to allow us to store cookies on your computer. :)

JeroenS

1/48 Tamiya Mk.I : My First Spitfire

Recommended Posts

Hi everybody, I'll not be getting to this one for a bit as I'm finishing a build for Nordic GB but let's put it up anyway so we (or rather, I) know it's for real and there's no getting out!

 

Many, many years ago I did build some aircraft, at least I seem to remember some wingy things but since all my builds back then fell apart rather quickly we'll never know for sure. So I'm not counting those, hence "My First Spitfire" actually means "My first Aircraft". Since my return to this lovely hobby, a little over 2 years ago, I've only built land dwelling vehicles and mostly trucks at that. 

 

But: since I like the concept of GB's very much (this will be my second GB), I like to read a lot, also about people flying Spitfires, I thought why not jump in the deep end and join this Spitfire GB. 

 

I chose Tamiya's 1/48 Mk.I, recently released, for the reason that I'm guessing Tamiya should provide me with a very decent kit, it's 1/48 so not too fiddly and it's a Mk.I which seems fitting since it's my first build. 

 

20200410200938-236ae73a-me.jpg

 

There are 3 versions in the box and I'll be building 610 Sqn from the Battle of Britain which seemed the obvious choice to me. It will be a strictly OOB build since I know nothing about building these things so I'll just be following the instructions. Of course, any tips will be greatly appreciated. I've been following the GB chat and am amazed at how much you all know about this iconic aircraft. 

 

I'm looking forward to starting it but I must show restraint and finish my Volvo first... 

Share this post


Link to post
Share on other sites

Restraint?

Finishing stuff?

What is this sourcery you speak of?

 

Just go ahead and do both !

:)

Share this post


Link to post
Share on other sites

I'm not listening! :talktothehand:

Share this post


Link to post
Share on other sites

Looking forward to watching Jeroen.  I am building a 1/48 MK.I from Airfix in a similar scheme (602 Sq).  Will be interesting to compare.

 

Dave

Share this post


Link to post
Share on other sites
55 minutes ago, Davek72 said:

Looking forward to watching Jeroen.  I am building a 1/48 MK.I from Airfix in a similar scheme (602 Sq).  Will be interesting to compare.

 

Dave

That should be interesting indeed. I'll let you start first ok? 😉 

Share this post


Link to post
Share on other sites
22 hours ago, JeroenS said:

That should be interesting indeed. I'll let you start first ok? 😉 

On my way J

Share this post


Link to post
Share on other sites

Oi!!! what are you doing here!!! :fight:

 

This an't a diesel, it's got wings, and you have something you're meant to be finishing??

 

Nice model you've chosen...now back to your truck!

Share this post


Link to post
Share on other sites
12 minutes ago, trickyrich said:

Oi!!! what are you doing here!!! :fight:

 

This an't a diesel, it's got wings, and you have something you're meant to be finishing??

 

Nice model you've chosen...now back to your truck!

Aye Cap'n!

Share this post


Link to post
Share on other sites

Good place to start with Spits.

 

Best wishes for the build.

Share this post


Link to post
Share on other sites
7 hours ago, Johnson said:

Good place to start with Spits.

 

Best wishes for the build.

Thanks Charlie, somehow I do hope that I won't feel the urge to start all the other versions after I've done this one! 🙂 

Share this post


Link to post
Share on other sites
19 hours ago, trickyrich said:

Oi!!! what are you doing here!!! :fight:

 

This an't a diesel, it's got wings, and you have something you're meant to be finishing??

 

Nice model you've chosen...now back to your truck!

Don’t listen to him @JeroenS, this is what he does instead of finishing his own models, stalk the rest of us :whistle:

Share this post


Link to post
Share on other sites

Good evening Jeroen

Welcome aboard and have fun ..

All the best

Patrice

Share this post


Link to post
Share on other sites

Evening all! Well, @trickyrich has released me from his Nordic clutches so now I'm actually building a Spitfire. Parts have been cut, first glue has been applied. I'm doing 610 Squadron, with open canopy. 

 

20200511211321-55a1f152-me.jpg

 

Now, to break the ice I have a question for you, just so that I don't mess up in step 1 already! I haven't built that many Tamiya kits since I rebooted the hobby about 2,5 years ago (uhm, two to be precise) and I'm not very good at following instructions anyway... But, I've already noticed that I should really be paying attention for this build 🙂 

 

So I have this question about the Tamiya instructions, just to make sure my interpretation is correct. 

 

610 Squadron is version "A" and B and C are the other options. For the part at the bottom of the photo there are extra instructions to distinguish between these 3 versions.

 

 20200511211321-1e2d2e2a-me.jpg

 

If I understand correctly, they want you to cut the 3 knobs I've marked as "1" for options B and C, they'll have you cut the piece I've marked as "2" for all versions and then, for versions B and C they also want you to cut that highlighted thingy I've marked as "3". 

 

Would you agree with that assessment? 

Share this post


Link to post
Share on other sites
On 4/14/2020 at 1:52 PM, trickyrich said:

Oi!!! what are you doing here!!! :fight:

 

This an't a diesel, it's got wings, and you have something you're meant to be finishing??

 

Nice model you've chosen...now back to your truck!

 

I'm just waiting for @JeroenS to take the propeller, tail wheel and cockpit canopy and then scratch build an immaculate Spitfire around them.

Share this post


Link to post
Share on other sites

Great to see you spread your wings! :pilot:

 

That looks like a cracking kit, my dad got one too recently. Build wise it has some clever ideas, like getting right alignment for the landing gears easy.

Share this post


Link to post
Share on other sites
On 5/11/2020 at 8:27 PM, JeroenS said:

Evening all! Well, @trickyrich has released me from his Nordic clutches so now I'm actually building a Spitfire. Parts have been cut, first glue has been applied. I'm doing 610 Squadron, with open canopy. 

 

20200511211321-55a1f152-me.jpg

 

Now, to break the ice I have a question for you, just so that I don't mess up in step 1 already! I haven't built that many Tamiya kits since I rebooted the hobby about 2,5 years ago (uhm, two to be precise) and I'm not very good at following instructions anyway... But, I've already noticed that I should really be paying attention for this build 🙂 

 

So I have this question about the Tamiya instructions, just to make sure my interpretation is correct. 

 

610 Squadron is version "A" and B and C are the other options. For the part at the bottom of the photo there are extra instructions to distinguish between these 3 versions.

 

 20200511211321-1e2d2e2a-me.jpg

 

If I understand correctly, they want you to cut the 3 knobs I've marked as "1" for options B and C, they'll have you cut the piece I've marked as "2" for all versions and then, for versions B and C they also want you to cut that highlighted thingy I've marked as "3". 

 

Would you agree with that assessment? 

I would agree with you. 

Nice to see some progress. 

Share this post


Link to post
Share on other sites
6 hours ago, Hockeyboy76 said:

I would agree with you. 

Thanks H!

 

Had some stuff to do the past 2 evenings but I'll be "on her tail" this evening!

Share this post


Link to post
Share on other sites

Not a whole lot to show but I did manage to get the fuselage halves ready. There are 2 parts per half, but the fit is so good that you'd never know.

 

20200514210206-30539c90-me.jpg

 

I got the insides done as well. added a bunch of small parts there. I'm lucky to have laminate flooring, no chance for the carpet monster although it may have a cousin because something does get lost every now and then. Not tonight though.

 

20200514205643-dff2f49c-me.jpg

 

I did spend a bit of time pondering whether I'd paint before assembly or not. Watched some vids on Youtube, looked at some of the builds here, before making up my mind. In the end the most important argument for me was that I'm just much more comfortable with painting after glueing than the other way around. I've tried it, but always I found parts needed extra cleanup, paint was damaged, glue didn't stick well enough, more paint was damaged... so in the end I spent more time touching up then painting. 

 

So I went ahead and assembled, gives a nice feeling of progress too. I'll make some more sub-assemblies and then paint the main colours, after which I'll fill in the details. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...