GreenStrawberry USS Discovery NCC-1031 FruitPACK (FP09) 1:2500

[Mike]

USS Discovery NCC-1031 FruitPACK (FP09)

1:2500 GreenStrawberry

 

 

Star Trek fans will have heard of the latest show from the Star Trek universe, which ploughs an alternate timeline furrow with Captain Pike still in charge of the Enterprise and some rather weird looking Klingons.  There’s also a view into the more sneaky side of Starfleet, Section 31, who don’t seem to share the higher moral standing of the previous incarnations of the United Federation of Planets.  The Discovery, from the Crossfield Class of ships has some quite extraordinary propulsion systems that allow her to travel almost anywhere instantly, but with some complications that cause issues at times, and lead to some head-scratching plot points.  I’m not entirely sold on the Spore-Drive myself, but that’s just me.

 

The Discovery herself has had a new captain in each of the two seasons so far, and with season three in production we wonder if there’s another one waiting in the wings.  The main protagonist is First Officer Michael Burnham, who grew up with Vulcan parents that gave her a stoical outlook and a tendency to whisper her lines, which irritates me a little.  It’s an ensemble show and the special effects are excellent, with the Discovery sharing a roughly similar outline of the Enterprise from above, but having a more flattened side and front profile.  I’ve also just learned that there’s going to be a spin-off show about Section 31, which is probably good news for Michelle Yeoh and another notch on her extensive CV.

 

 

The Set

This is a new tool from GreenStrawberry, who aim to improve the detail beyond the snap-together heritage of the recent kit from Polar Lights.  In case you’re unfamiliar, their FruitPacks are supersets of their existing detail sets that offer a one-envelope solution to get your detail on!  They arrive in card envelopes with the sets included within their individual wrappers for additional protection.  This set includes the exterior detail set and the hangar bay set, so let’s see what’s in them.

 

 

Detail Set (08319-1/2500)

This is a two sheet set that is etched from a thinner gauge of brass so that the details don’t project too far from the surfaces, as it’s a small scale ship that would look out of place if they were of thicker stock.  The two sheets contain mostly skin parts, but also have some additional details that aren’t included on the kit, and it should result in a much more detailed model once painted and decaled.

 

 

The main hull is an arrow-head shape with the wide hangar bay in the rear.  In the top of the nacelle supports or wings, there is a shallow recess that is removed and replaced by a deep part that is folded into a box insert that adds depth and a number of tiny window cut-outs.  At the rear there are detail inserts in the back of the wings, with a choice of two types, so check your references and suit yourself.  On the undersides there are more skins added to the hull, with slimmer inserts added to the leading edges of the wings where injection moulding was unable to provide sharp detail.  The saucer section is given a highly detailed deflector where it joins the hull, with multiple parts forming the surround and a spoked representation of the dish itself.  The neck is skinned, as are the sides of the inner saucer on both sides, the outer rim and the “bridge” that leads to the bridge dome.  The sloped outer edges of the inner saucer is also skinned, as are the inner sloped edges of the outer saucer section, then the neck has another sliver covered up with some final parts.  More raised detail is added to the top of the saucer where there are raised blocks, and yet more details are added to the roof of the route to the bridge.

 

Given the slightly underwhelming surface detail of the ship out of the box that relies over-heavily on the decals to give the impression of more depth, this set should give it the massive boost that it needs, with the decals placed over the top treated with several coats of solution to settle them down into the recesses and add realism to the whole model.  It’s a must-have if you want to turn it from an expensive toy into a model.  Dare I say mandatory?

 

Hangar Bay (08419-1/2500)

Since the original 60s series got the budget for a shuttle to augment the cheaper effects of beaming down to every planet they visit, all the main ships have had shuttle bays from which to launch and retrieve these vessels.  On the kit the bay is moulded closed, so the first task is to remove that part, plus six of the attachment lugs that make this a snap-fit kit.  Then the bay is folded up with a number of simple straight folds forming the basis of the bay, which is then adorned with internal skins, a number of prominent ribs, a perforated roof section that is then closed in by folding down the remaining side after placing a stepped part into the centre back of the bay.  The completed bay can then be slid into place within the hull, and has an optional two-part bay door if you want to hide away all your work.  This set is etched from thicker gauge brass, so will be less flexible than the exterior set and therefore easier to handle when folding it to shape.

 

 

 

Conclusion

Having got one of these kits, they’re a little disappointing out of the box, relying too much on the large decal sheets to provide the detail.  I’m not a fan of 2D detail, so these two sets in the one box not only save you a few credits, but also does the kit a huge favour in terms of detail.  They’re an absolute necessity if you enjoy making detailed models.

 

Extremely highly recommended.

 

 

You can also buy them separately if you don’t want both

 

Detail Set (08319-1/2500)

 

Hangar Bay (08419-1/2500)

 

Review sample courtesy of