AdriaN (MLT) Posted January 31, 2020 Share Posted January 31, 2020 Like many of us, I always keeping having to replace my small tubs of super glue because they harden up. And very often the nozzle clogs up, even though I carefully clean the glue after use and wait for the glue to fall back into tub and out of the nozzle. If you put the cap back on immediately you create a vacuum and the glue remains in the nozzle. 'Delux Rocket crystal clear glue' is a great glue because it dries clear and doesn't mist up parts, BUT, it is quite expensive at 11 euro a bottle and not easy to find. It ends up drying up and I would have barely used any. Did some research and found it dries up because the moisture in the air reacts with it and makes the glue harden. I came across a few tips saying it can be put into a sealed container to prevent moisture from getting in. Also by throwing in a moisture bag. Others requested throwing it in a sealed container in the fridge. Will it actually help in preventing glue from drying up? NO IDEA! But i gave it a try below........ Link to comment Share on other sites More sharing options...
rayprit Posted January 31, 2020 Share Posted January 31, 2020 Do as I do? 7 tubes of superglue from Poundland, all on one card...………….for a £1.....been using them for years and no bad results yet...………...once a tube is opened, as long as you place the cap back on and place in the fridge, it lasts indefinitely. Currently have different speeds in the fridge, mainly zap a gap, thick, medium and thin...…………..had them in there for about 4, years, possibly longer, don't use them so much now as tend to rely on the Poundland ones...…...if one goes off, which hasn't happened yet, go for another from the fridge 1 Link to comment Share on other sites More sharing options...
busnproplinerfan Posted January 31, 2020 Share Posted January 31, 2020 My biggest problem is the tips clog up constantly, this idea might help there to. 1 Link to comment Share on other sites More sharing options...
Kiwidave4 Posted January 31, 2020 Share Posted January 31, 2020 Always keep mine in the fridge and dont have a problem. Given the rate at which I model we are talking here about years! I use Zap and always wipe the nozzle of the bottle before replacing the cap which seems to help prevent clogging - if there is no glue up the spout when you put the cap on then there is none to set and clog the nozzle. 1 Link to comment Share on other sites More sharing options...
AdriaN (MLT) Posted February 1, 2020 Author Share Posted February 1, 2020 3 hours ago, rayprit said: Do as I do? 7 tubes of superglue from Poundland, all on one card...………….for a £1.....been using them for years and no bad results yet...………...once a tube is opened, as long as you place the cap back on and place in the fridge, it lasts indefinitely. Currently have different speeds in the fridge, mainly zap a gap, thick, medium and thin...…………..had them in there for about 4, years, possibly longer, don't use them so much now as tend to rely on the Poundland ones...…...if one goes off, which hasn't happened yet, go for another from the fridge Do you leave them in the fridge loose or put them in a jar? Link to comment Share on other sites More sharing options...
AdriaN (MLT) Posted February 1, 2020 Author Share Posted February 1, 2020 (edited) 2 people suggested leaving it in the fridge.. so I guess I will have to leave them in the fridge. I am sure mom/dad/bro are not going to accept this! 😂😂 Edited February 1, 2020 by AdriaN (MLT) Link to comment Share on other sites More sharing options...
Black Knight Posted February 1, 2020 Share Posted February 1, 2020 1. put them in a non-see-thru box and mark it Adrian's Marmite Sandwiches - guaranteed no-one will open that box 2. I apply a coat of vaseline on the neck and threads of a bottle or tube - helps prevent the lid getting glued on 2 Link to comment Share on other sites More sharing options...
dnl42 Posted February 1, 2020 Share Posted February 1, 2020 The fridge won't work for me... I just buy small bottles. Cheaper in the long run because when it finally does age, I've only lost a small amount. Link to comment Share on other sites More sharing options...
Sabre Freak Posted February 1, 2020 Share Posted February 1, 2020 Squeeze once a day, never hardens...Oh, wait think I may have that backwards. Fun aside use it or loose it Link to comment Share on other sites More sharing options...
colin Posted February 1, 2020 Share Posted February 1, 2020 Gave up buying the large zap bottles as they go off before I've used a fraction of it.As others, poundland small bottles now 2 Link to comment Share on other sites More sharing options...
rayprit Posted February 1, 2020 Share Posted February 1, 2020 11 hours ago, AdriaN (MLT) said: Do you leave them in the fridge loose or put them in a jar? I leave them on the card and remove them as I need them...……….I have recently just rescribed an airfix Vulcan and due to a lot of mistakes and filling of holes or sink marks on the intake splitter plates and another kit, I managed to use a whole tube over the course of 3 weeks. I tend to use superglue as my one and only filler now, gave up on other well known putties...………….hence the tubes are ideal I do keep my 2 part epoxy in a jar in the fridge, but only because it keeps the tubes upright, otherwise, lying down one of the catalysts leaks and tends to lie in gooey mess, making the tube awkward to pick up 1 Link to comment Share on other sites More sharing options...
AdriaN (MLT) Posted February 1, 2020 Author Share Posted February 1, 2020 18 hours ago, Black Knight said: 1. put them in a non-see-thru box and mark it Adrian's Marmite Sandwiches - guaranteed no-one will open that box 2. I apply a coat of vaseline on the neck and threads of a bottle or tube - helps prevent the lid getting glued on 2. Fantastic idea! never thought of it. Ill try it out next time i buy super glue. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now