Jump to content

Bandai 1/144 Millennium Falcon


Recommended Posts

Ok, this probably won't be your typical Work In Progress thread. This started out as me trying out some pre-shading techniques which I've never really used before. I usually build 1/32 aircraft but thought the Falcon would be a great test subject for pre-shading and for me to see how it works (or not).

 

The kit is the Force Awakens release of the Falcon. For AM, I've got Tyridium's lighting kit and the Green Strawberry PE. 

 

I started with the main hull sections. I used Tamiya NATO Black for the pre-shading on the bare plastic. 

 

IMG_20200105_165601-L.jpg

 

IMG_20200105_165607-L.jpg

 

Over this, I started to fill in the panels using Gunze H338 thinned down to about 70/30 thinner to paint. 

I went back and did the mandibles to match. 

 

IMG_20200105_165540-L.jpg

 

 

 

  • Like 2
Link to comment
Share on other sites

After a couple nights' work at the bench, I managed to get the two main hull sections completed. 

 

IMG_20200108_202120-L.jpg

 

IMG_20200108_202136-L.jpg

 

Next up, I'm currently working on the various coloured panels/patches. My initial plan was to paint them in suing suitable colour matches. There's a website called mech9 that has paint colour conversion charts posted for many Bandai kits. 

One tip I read about was to use the kit stickers as a template for cutting paint masks for doing all the panels. I tried this and it seems to work ok. Then I decided to try the kit's decals. Surprisingly, those worked really well.

 

IMG_20200110_172006-L.jpg

 

IMG_20200110_172016-L.jpg

 

They're conforming over all the small bumps and lumps on the hull. So I think I'll continue with these even though I normally don't do so well with decals.

 

Carl

 

  • Like 4
Link to comment
Share on other sites

Thanks everyone! 

 

I've been plugging away at the model in between clearing a space on my bench so my two sons have somewhere to build their kits. 

 

For the gun ports and cockpit glass, I decided to use the clear parts rather than just the framing. I hit these with a base coat of black first before the top coat. The gun ports I hand cut masking tape to fit while for the cockpit section, I used the kit's stickers as masks. 

 

IMG_20200111_173815-L.jpg

 

Here's the cockpit section after I painted the top coat and installed it. 

 

IMG_20200112_171855-L.jpg

 

And here's one of the gun ports. 

 

IMG_20200112_171931-L.jpg 

For the inner section of the gun ports, I used the PE parts from Green Strawberry. These include some printed stickers that are translucent in places and allow light to shine through. 

 

IMG_20200112_172005-L.jpg

 

Lastly, here's most of the sub assemblies alongside a Fine Molds Y-Wing I'm building. This is on the side of my bench that I'm clearing for my boys. 

 

IMG_20200113_100206-L.jpg

 

I'm hoping to be able to finish both kits this month. 

 

Carl

  • Like 5
Link to comment
Share on other sites

I made some more progress. 

I finally installed the gun turret interiors and the guns themselves. 

 

IMG_20200118_125522-L.jpg

 

I also finished the decals on the lower hull.

 

I ended up working away and had the hull together in no time. Unfortunately I didn't grab any photos before I closed things up. It all went very smoothly. 

 

IMG_20200118_125533-L.jpg

 

IMG_20200118_125551-L.jpg

 

I've got the antenna, the circular exhaust vents and decals left before I do any final weathering. 

 

IMG_20200118_131747-L.jpg

 

IMG_20200118_131800-L.jpg

 

Carl

  • Like 4
Link to comment
Share on other sites

I finally got some time to start on the upper hull decals. 

 

IMG_20200120_102238-L.jpg

 

IMG_20200120_111653-L.jpg

 

There are certainly a lot of them. 

 

IMG_20200120_162829-L.jpg

 

I also fitted the rear exhaust vents and the antenna so assembly is completed. I did a test fit on the included base 

 

IMG_20200120_162920-L.jpg

 

IMG_20200120_163353-L.jpg

 

Now for a clear coat and some final weathering. 

 

Carl

 

 

 

  • Like 4
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...