Roger Newsome Posted January 11, 2020 Share Posted January 11, 2020 (edited) It's coming along very well Darryl despite a couple minor setbacks. Fingers crossed number three isn't too disastrous. 🤞😉 Roger. Edited January 11, 2020 by Roger Newsome Link to comment Share on other sites More sharing options...
Jasper dog Posted January 11, 2020 Author Share Posted January 11, 2020 Thanks Roger, if being honest I'd prefer no number 3! Cheers Darryl 1 Link to comment Share on other sites More sharing options...
Bullbasket Posted January 12, 2020 Share Posted January 12, 2020 At least you got the cammo on before the A/B played up. It's looking really good. John. 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 12, 2020 Author Share Posted January 12, 2020 2 hours ago, Bullbasket said: At least you got the cammo on before the A/B played up. It's looking really good. John. Thanks John, gave me a chance to work on the JP, dont like abandoning kits! Still need to unmask at some point to find what has come adrift! Cheers Darryl Link to comment Share on other sites More sharing options...
Andy350 Posted January 12, 2020 Share Posted January 12, 2020 On 13/12/2019 at 07:31, Jasper dog said: Shuffling along, interior pretty much all together. Assembled, painted and basic weathering The weakest / most fragile being the seat backs, will need to be particularly careful not to knock or be to rough in handling, Even with doors open i can't imagine much being visible once all assembled. Surprising how little there is to show, considering how long it has taken to get this far. Or could just be me being really slow, however i only tend to get 30-40 mins per day to play. As this is a fairly slow build, being tempted to dig out something Tamiya or similar just to keep things moving along..... I've a Dragon Sherman or two but they don't fulfil the quick turnaround requirements so they might wait till the Otter is done. Next job here is to get the body together to a position where it can be painted. Thanks to everyone that had taken the time to look in and leave comment, really helps to keep the mojo up. Cheers Darryl Great looking interior Darryl. Nice build. Something that I would like to try next (something without tracks!). 2 Link to comment Share on other sites More sharing options...
Andy350 Posted January 12, 2020 Share Posted January 12, 2020 Great looking build Darryl. 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 13, 2020 Author Share Posted January 13, 2020 (edited) 18 hours ago, Andy350 said: Great looking build Darryl. 19 hours ago, Andy350 said: Great looking interior Darryl. Nice build. Something that I would like to try next (something without tracks!). Thanks Andy, I'm enjoying this is in a peculiar sort of way, not something thing I'd have gone looking but.... It's not a shake the box sort of kit but nothing too taxing. The only thing to watch out for, as of yet, is the fragility of some aspects and trying to get the chassis square and level. (Which I doubt I have, btw). If you're after something without tracks, which is understandable after playing with Ind-links. (I know lots of people don't like them but rubber band or ds tracks are a lot easier). There are lots of armoured cars, wagons etc around, quite fancy the new Tamiya M3 Scout Car for one. Probably go for a mainstream manufacturer rather than something tricky, so much more relaxing! Cheers Darryl Edited January 13, 2020 by Jasper dog 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 13, 2020 Author Share Posted January 13, 2020 After the airbrush coughed and spluttered all over the show decided the tamiya buff was going to an all over affair rather than just selected areas, I'll include a photo but camera hasn't really picked up the affect. It's just toned everything down a bit and given a dusty finish. Next up intial panel line wash, and grime before adding the various bits and bobs like steps etc. If it's of use to anyone the new nozzle wasn't the cure, I did help the spray pattern which due to the worn tip was one sided. In the end a big strip down, beyond where they include tools for. Removed the body section the nozzle screws into and discovered a few years of muck/gunk etc and hey-presto! So instead of a decent modelling session I got to; strip, clean, repeat... an airbrush. Thanks for looking Darryl 6 Link to comment Share on other sites More sharing options...
FrancisGL Posted January 14, 2020 Share Posted January 14, 2020 Annoying airbrush! ... when you think everything is under control, you lose a whole modeling session trying to know what's wrong ... Chees Darryl 👍 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 14, 2020 Author Share Posted January 14, 2020 3 hours ago, FrancisGL said: Annoying airbrush! ... when you think everything is under control, you lose a whole modeling session trying to know what's wrong ... Chees Darryl 👍 Couldn't agree more, but we live and learn. Could probably strip it down blindfolded now! Cheers 1 Link to comment Share on other sites More sharing options...
Soeren Posted January 14, 2020 Share Posted January 14, 2020 That is what I like about H&S airbrushes, you pull the nozzle out and it is pretty much stripped and this is a thorough cleanup after each session in no time. 2 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 25, 2020 Author Share Posted January 25, 2020 Seams a while since I last added to this thread. I've not been idle, just whatever I did at the wash and early weathering stage didn't show up well on photos. Panel line wash followed by dust wash. Matt coat done, note how most of dust wash affect disappears, particularly in the photos. For a break did a quick build, otb, alongside the existing projects. Did two of these, storage was a big issue for the stash etc. Otb build, no weathering applied! (Nice to have a build done in less than an hour). Back to the Otter, doors etc that had been masking the interior have been removed and some of the small details added, (lamps, steps etc) found the source of the rattle. Loose sest base could have been worse. Started with a few scuffs, scratches and chips to the paintwork, done with a combination of v-dark brown and a sponge and brush followed up with a pencil over worn edges. Doors and hatches refitted, along with the Boyes atr, starting to look something like... Problem is handling, once off its stand, so many bits to knock off, particularly if you're ham-fisted. Need to crack on and get this knocked off, shouldn't say that, finished! Thanks for looking. Darryl 6 Link to comment Share on other sites More sharing options...
Bullbasket Posted January 25, 2020 Share Posted January 25, 2020 39 minutes ago, Jasper dog said: Did two of these, storage was a big issue for the stash etc. Otb build, no weathering applied! (Nice to have a build done in less than an hour). Sorry Darryl, but you've made a load of mistakes there. It's the wrong shade of red, the rivets are in the wrong place and the panel lines are missing. BUT.............the Otter is looking really good. It's a beggar when you do all that weathering and it doesn't show up properly in the photos. I have the same problem. Next time I'm in Blightly, I'm going to have to get myself a light box. BTW. Where did you get the stand from? John. 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 25, 2020 Author Share Posted January 25, 2020 6 hours ago, Bullbasket said: Sorry Darryl, but you've made a load of mistakes there. It's the wrong shade of red, the rivets are in the wrong place and the panel lines are missing. BUT.............the Otter is looking really good. It's a beggar when you do all that weathering and it doesn't show up properly in the photos. I have the same problem. Next time I'm in Blightly, I'm going to have to get myself a light box. BTW. Where did you get the stand from? John. Hi John, tell me about it, apparently the correct colour, for diehard aficionados is blue! The stands/turntables are Tamiya and came together in the one box, really handy. Thanks Darryl 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 25, 2020 Author Share Posted January 25, 2020 Little more progress, nearly all odds and ends attached, aerial, tools, etc. More importantly body dropped onto chassis, got a little carried away and threw a little Tamiya extra thin at it and cemented them together. Looks worryingly like progression towards completion! Whilst on a roll added wheels, all four wheels touch the ground.....nearly!😉 6 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 26, 2020 Author Share Posted January 26, 2020 Cracking on with this now, weathering done with pigments, generally going for dry, grubby, dirty look as opposed to caked in mud. Not sure about the spare wheel.. How long those mirrors will last is anyone's guess, if I did another I'd be tempted to replace with wire and drill a much deeper locating hole to secure them. It's at the point where its tricky to pick up, lots of fragile appendages. Just a few spots to touch up and the etch sand channel to paint and secure. Some careless oik broke the bipod legs for the bren so tough! Still not sure about the colour as the Vallejo light mud looks like to pale green to me. Thanks for looking Darryl 9 Link to comment Share on other sites More sharing options...
clive_t Posted January 26, 2020 Share Posted January 26, 2020 An amazing result, I'd be over the moon with that 1 Link to comment Share on other sites More sharing options...
Bullbasket Posted January 26, 2020 Share Posted January 26, 2020 3 hours ago, Jasper dog said: Still not sure about the colour as the Vallejo light mud looks like to pale green to me. Maybe you got a duff bottle. If you look at my Kiwi Sherman, that was painted with Vallejo Panzer Aces Light Mud.. John. 1 Link to comment Share on other sites More sharing options...
Redcoat2966 Posted January 26, 2020 Share Posted January 26, 2020 Nice job all round Darryl.... the interior weathering the dust and weathering on the exterior.......really nice...... Regards Simon. 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted January 26, 2020 Author Share Posted January 26, 2020 6 hours ago, clive_t said: An amazing result, I'd be over the moon with that Thanks Clive, has taken a while but I'm fairly pleased,. You can always spot things that could have been done better but that's all part of this game! Few bits to finish off asap. 5 hours ago, Bullbasket said: Maybe you got a duff bottle. If you look at my Kiwi Sherman, that was painted with Vallejo Panzer Aces Light Mud.. John. Thanks John, I did wonder as it looks quite different to the ak real colour bottle I also have. Then again, your Sherman Light Mud looks different to both.... 4 hours ago, Redcoat2966 said: Nice job all round Darryl.... the interior weathering the dust and weathering on the exterior.......really nice...... Regards Simon. Hi Simon, thanks, just seams to have come together nicely towards the end, even with my early reservations. Guess I can't keep putting off some of the less than straight forward builds. Can't keep hiding in the comfort zone that is Tamiya and Meng etc. That Scammel Pioneer and the Fries Kran won't build themselves.... Thanks again, much appreciated. Darryl Link to comment Share on other sites More sharing options...
Jasper dog Posted February 26, 2020 Author Share Posted February 26, 2020 At last, finished! Posted in RFI but heres a taster, complete with figure and base. Thanks for looking Darryl 6 Link to comment Share on other sites More sharing options...
Hamden Posted February 26, 2020 Share Posted February 26, 2020 Great build, stunning paintwork - result outstanding model very well done! Roger 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted February 26, 2020 Author Share Posted February 26, 2020 9 hours ago, Hamden said: Great build, stunning paintwork - result outstanding model very well done! Roger Thanks Roger, really nice of you to say so. Taken a while to get around to a base for it but think it has worked out ok. Cheers Darryl 1 Link to comment Share on other sites More sharing options...
robw_uk Posted June 9, 2022 Share Posted June 9, 2022 very nice.... I am about to start to build this for the Canadian GB (so going Canadian markings) - not sure whether to get the Black Dog resin set (or just replace the wheels???) - what colour for a Canadian vehicle? 1 Link to comment Share on other sites More sharing options...
Jasper dog Posted June 11, 2022 Author Share Posted June 11, 2022 On 09/06/2022 at 19:52, robw_uk said: very nice.... I am about to start to build this for the Canadian GB (so going Canadian markings) - not sure whether to get the Black Dog resin set (or just replace the wheels???) - what colour for a Canadian vehicle? Hi Rob, as I recall my build was oob, I do believe replacement wheels are available and are supposed to be a fair improvement on the originals. As for colour, I've no idea unfortunately, I'd guess same as a Brit one so depends upon theatre and time frame. Nice kit though and goes together without issues, it was a relief to find all four wheels touching the ground though! Good luck. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now