Bedders Posted November 10, 2019 Share Posted November 10, 2019 (edited) Morning All, After a pause for the Cenotaph this morning I'm now able to post up my first completion in a good while. One of my favourite Mustangs, again using the Airfix 1/72 kit. It's an early D-5 model from the 20th FG. The beautiful nose art and KIS(S) fuselage codes have stayed in my mind since I first saw the colour profile in my Dad's copy of "The Mighty Eighth". So when I found that PrintScale had done the decals in 1/72 I knew the time had come to build it. The Airfix kit is straightforward enough but I had to remove/reshape the tail fillet and correct the hinge lines on the elevators. Then it was a question of getting the paint job right which was a bit complicated around the nose art, but worked out OK. Hope you like the results. You'll notice that the wheel well ceilings are two different colours. This was a bit of fun: I read somewhere (on BM) that wheel well ceilings were either left natural aluminium or painted yellow zinc cromate, depending on what was in the parts bin. Ribs were usually YZC, as was the rear spar. Given that the wing skins were constructed separately before being mated with the fuselage, I thought I'd do one wheel well in each colour. With some friends: Here's the original, taken around August-September 1944, not long after 20FG converted from P-38s, using new airframes that it seems never received invasion stripes. So they just had the black theatre stripes which were overpainted on the topsides, probably with RAF dark green. This aircraft crashed in an accident in October 1944, the pilot - Lt Walter Mullins, being lost, and commemorated at the Cambridge US cemetery. And here's a good photo of a sister-ship. Finally that profile that sparked my interest years ago. Thanks for looking, Justin Edited November 10, 2019 by Bedders 34 Link to comment Share on other sites More sharing options...
Vinnie Posted November 10, 2019 Share Posted November 10, 2019 I agree it's a nice kit to work with and you've certainly done it justice.👍 1 Link to comment Share on other sites More sharing options...
Hairtrigger Posted November 10, 2019 Share Posted November 10, 2019 Splendid... Love the nose art.. 1 Link to comment Share on other sites More sharing options...
John_W Posted November 10, 2019 Share Posted November 10, 2019 Very nice, and you puttied the wing panel joints as per the real aircraft. 1 Link to comment Share on other sites More sharing options...
Jackson Duvalier Posted November 10, 2019 Share Posted November 10, 2019 The wings do look great. Would you share your method for filling the panel lines? I've tried several methods on my P-51s and none are as quick and easy as I'd like. Good job removing the fin fillet as well. 1 Link to comment Share on other sites More sharing options...
jefropas Posted November 10, 2019 Share Posted November 10, 2019 Love the conversion, I have a handful of Airfix kits, sounds pretty straight forward, esp. given how soft the plastic is. Great work! Jeff 1 Link to comment Share on other sites More sharing options...
kapam Posted November 11, 2019 Share Posted November 11, 2019 Beautifully done! Nice idea with the wheel wells and quite plausible too, by the sound of it. Love the subtle paint chipping. 1 Link to comment Share on other sites More sharing options...
Bedders Posted November 11, 2019 Author Share Posted November 11, 2019 On 11/10/2019 at 8:27 PM, Jackson Duvalier said: The wings do look great. Would you share your method for filling the panel lines? I've tried several methods on my P-51s and none are as quick and easy as I'd like. Good job removing the fin fillet as well. Thanks everyone. Jackson, for the panel lines I used normal filler this time. I've used Mr Surfacer in the past, and also Tipp-ex correction fluid. The liquids are easier to apply but harder to remove. So I'll probably stick to the filler in future, even if it takes a bit of time. Im not convinced that the panel line filling needs to be perfect. On the real aircraft the cracks began to appear naturally after a time, so an indication of what lies beneath isn't a disaster. Justin Link to comment Share on other sites More sharing options...
RT Nevada Posted November 12, 2019 Share Posted November 12, 2019 I love the od green p-51’s! I’m going to be building a model of “happy jacks go buggy” from 20th fg as soon as I’m done with a 110 I’m working on currently. It’ll be my first attempt at a bare metal finish, on the fuselage atleast. What type of paint did you use for your aluminum because it looks great! 1 Link to comment Share on other sites More sharing options...
Jackson Duvalier Posted November 12, 2019 Share Posted November 12, 2019 8 hours ago, Bedders said: for the panel lines I used normal filler this time. I've used Mr Surfacer in the past, and also Tipp-ex correction fluid. The liquids are easier to apply but harder to remove. So I'll probably stick to the filler in future, even if it takes a bit of time. Im not convinced that the panel line filling needs to be perfect. On the real aircraft the cracks began to appear naturally after a time, so an indication of what lies beneath isn't a disaster. I've tried Mr. Surfacer and correction fluid also, and PPP and Tamiya white putty. The solvent-dipped cotton bud wipe down hasn't easily gotten me the desired result with the liquid fillers either. There's always some sanding. C'est la vie. I agree with your assessment of the ghostly cracks and imperfections, a selective adoption of the wabi-sabi concept can be helpful in preventing analysis paralysis. 1 Link to comment Share on other sites More sharing options...
Bedders Posted November 12, 2019 Author Share Posted November 12, 2019 4 hours ago, RT Nevada said: I love the od green p-51’s! I’m going to be building a model of “happy jacks go buggy” from 20th fg as soon as I’m done with a 110 I’m working on currently. It’ll be my first attempt at a bare metal finish, on the fuselage atleast. What type of paint did you use for your aluminum because it looks great! Thanks RT. The aluminium is Alclad II. I don't have huge amounts of time available for airbrushing so my standard, reasonably quick method at the moment is to prime the model with Mr Surfacer 1200 out of the rattle can, and sand it nice and smooth. Then a coat of Alclad Alumininium over the whole airframe which represents the painted areas of the wings and serves as a base for other shades elsewhere. The wings then got masked off and the natural metal areas left exposed for a coat of Alclad polished aluminium. The stainless steel areas around fhe exhaust are Duraluminium. Then a brushed on coat of Aqua gloss to protect it all, before other colours go on. Here's a photo of the model after I'd done the metallics and black areas, and before the OD went onto the nose, and RAF dark green onto the wings. I found the decal for the 55FS tail triangle a bit small, so I painted that and then cut out the S to add later. Must say I liked the look of the black stripes on the wings, and it slightly pained me to paint them over with green. So I'll just have to build another Mustang now! Justin 1 1 Link to comment Share on other sites More sharing options...
IanC Posted November 12, 2019 Share Posted November 12, 2019 Lovely crisp paint job. Looks great. 1 Link to comment Share on other sites More sharing options...
RT Nevada Posted November 12, 2019 Share Posted November 12, 2019 10 hours ago, Bedders said: Thanks RT. The aluminium is Alclad II. I don't have huge amounts of time available for airbrushing so my standard, reasonably quick method at the moment is to prime the model with Mr Surfacer 1200 out of the rattle can, and sand it nice and smooth. Then a coat of Alclad Alumininium over the whole airframe which represents the painted areas of the wings and serves as a base for other shades elsewhere. The wings then got masked off and the natural metal areas left exposed for a coat of Alclad polished aluminium. The stainless steel areas around fhe exhaust are Duraluminium. Then a brushed on coat of Aqua gloss to protect it all, before other colours go on. Here's a photo of the model after I'd done the metallics and black areas, and before the OD went onto the nose, and RAF dark green onto the wings. I found the decal for the 55FS tail triangle a bit small, so I painted that and then cut out the S to add later. Must say I liked the look of the black stripes on the wings, and it slightly pained me to paint them over with green. So I'll just have to build another Mustang now! Justin Thanks for the detailed explanation! That will be my first attempt with alclad so that will definitely help me in my process. I’m gonna try it out on a test bed tho first haha. What grit sandpaper do you use to sand the mr surfacer? Link to comment Share on other sites More sharing options...
72modeler Posted November 12, 2019 Share Posted November 12, 2019 Justin, Awesome 20th FG Mustang! I like the asymmetrical finish in the wheel bays, which was often seen on bare metal P-51D's- nice little detail. One observation- hard tp see on your photos, but did you leave a "ghost image" of the black identity wing and stabilizer bands that were overpainted with OD? That would be the only thing I could think of to take this outstanding build up another notch. Like the partially bled down fairing doors, you have portrayed some little details that make this a replica, not just a model. I am also planning to do Happy Jack's Go Buggy, of which a beautifully restored example is based here where I live- I get to see and hear her fly over my house all the time! (See the link below for restoration photos which also illustrate the same wheel bay treatment as your model!) Well done! Mike http://midwestaero.com/site/Photo_Gallery/Pages/Happy_Jacks_Go_Buggy.html 1 Link to comment Share on other sites More sharing options...
Farmerboy Posted November 12, 2019 Share Posted November 12, 2019 She is certainly a cracking build, full credit to you. 1 Link to comment Share on other sites More sharing options...
Bedders Posted November 12, 2019 Author Share Posted November 12, 2019 30 minutes ago, 72modeler said: Justin, Awesome 20th FG Mustang! I like the asymmetrical finish in the wheel bays, which was often seen on bare metal P-51D's- nice little detail. One observation- hard tp see on your photos, but did you leave a "ghost image" of the black identity wing and stabilizer bands that were overpainted with OD? That would be the only thing I could think of to take this outstanding build up another notch. Like the partially bled down fairing doors, you have portrayed some little details that make this a replica, not just a model. I am also planning to do Happy Jack's Go Buggy, of which a beautifully restored example is based here where I live- I get to see and hear her fly over my house all the time! (See the link below for restoration photos which also illustrate the same wheel bay treatment as your model!) Well done! Mike http://midwestaero.com/site/Photo_Gallery/Pages/Happy_Jacks_Go_Buggy.html Thanks folks. Mike, there is a slight ghost of the black stripes on the top surfaces, but less visible than I would have liked. This is because the dark green is a handmade mix of Tamiya paints to match xtracrylix RAF dark green. I mixed it myself as I find Tamiya easier to brush-paint and needed to do that around the nose artwork. The problem was that the first mix I made came out wrong and I had to correct it and spray again. So the ghost stripes unfortunately got two coats of paint rather than the intended one! HJGB is another 20th FG beauty. I much prefer the earlier black-white nose-band to the later piano keys. Interesting that Ilfrey's machine did get invasion stripes, at least underneath. Good luck with the build. Justin 1 Link to comment Share on other sites More sharing options...
F-32 Posted November 13, 2019 Share Posted November 13, 2019 Cracking job, looks awesome 1 Link to comment Share on other sites More sharing options...
Wulfman Posted November 13, 2019 Share Posted November 13, 2019 That’s a great build and finish, I did the same scheme on my ancient Heller kit, many years ago. (This came with no fin fillet). 1 Link to comment Share on other sites More sharing options...
Cookenbacher Posted December 8, 2019 Share Posted December 8, 2019 This one got by me Justin, but I'm caught up now - another inspiring build! 1 Link to comment Share on other sites More sharing options...
Mark Joyce Posted December 8, 2019 Share Posted December 8, 2019 Great looking Mustang, Justin, and impressive paintwork on something in 72nd scale. Was the tail conversion difficult? There is an aftermarket resin tail for the Airfix kit. I had thought about getting one for mine, but instead have ordered the 48th scale Airfix kit for my planned markings. Cheers, Mark 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now