Selwyn Posted November 9, 2019 Share Posted November 9, 2019 2 hours ago, PhantomBigStu said: Hoping the iron bomb version comes out first given my inability to spray white, going to be a long wait otherwise You do realise that the bomb bay and bomb carriers are all painted white? Selwyn 3 Link to comment Share on other sites More sharing options...
Adam Poultney Posted November 9, 2019 Author Share Posted November 9, 2019 58 minutes ago, Phil Gollin said: . Vulcan B.1, followed by a Victor B.1, followed by a Valiant B.2, and finally a Short Sperrin. Easy. . Mmm yes. Swap the sperin and Valiant though. 1 Link to comment Share on other sites More sharing options...
Adam Poultney Posted November 9, 2019 Author Share Posted November 9, 2019 1 hour ago, percival p. said: Apologies for the diversion and a possibly stupid question, but I take it from this recommendation that appliance white works well on a large flat surface: would it also be suitable for the underside of a 1/72 Skyhawk? I ask this because I can imagine a paint that is designed for something on a domestic scale to spray on quite fiercely and clog up the nooks and crannies of a small model. Well it went onto my smaller scale V Bombers just fine so I don't see there being any problems. Panel lines are often overscale anyway. Just you're probably best off to apply it in two coats over a white primer and basecoat. It's very opaque which is nice for a white so preshading should be quite aggressive. Link to comment Share on other sites More sharing options...
Admiral Puff Posted November 9, 2019 Share Posted November 9, 2019 3 hours ago, Adam Poultney said: So now that we have a vulcan what can we beg for and kick and scream until we get next? Valiant reissue? Repeat after me (ad nauseum): V E N O M ... (Although a new Canberra B.2/6/20 would be nice, as well ...) 7 Link to comment Share on other sites More sharing options...
Thomas V. Posted November 9, 2019 Share Posted November 9, 2019 (edited) Have no doubt that its going to be huge seller, my only wish is that like Victor is labelled made in Britain, thus far better injection process and higher quality plastic. Edited November 9, 2019 by Thomas V. 2 Link to comment Share on other sites More sharing options...
Space Ranger Posted November 9, 2019 Share Posted November 9, 2019 3 hours ago, ElectroSoldier said: A lot of after market resin producers will be disappointed as they have put so much work into improving the old kit. I reiterate my offer to dispose of all those now-useless aftermarket products. 😀 Link to comment Share on other sites More sharing options...
Space Ranger Posted November 9, 2019 Share Posted November 9, 2019 1 hour ago, percival p. said: Apologies for the diversion and a possibly stupid question, but I take it from this recommendation that appliance white works well on a large flat surface: would it also be suitable for the underside of a 1/72 Skyhawk? I ask this because I can imagine a paint that is designed for something on a domestic scale to spray on quite fiercely and clog up the nooks and crannies of a small model. If you have an airbrush, you can always decant from the spray can and thin it to your liking/as appropriate. 1 Link to comment Share on other sites More sharing options...
general melchett Posted November 9, 2019 Share Posted November 9, 2019 (edited) Hi chaps, I'm glad the model has gone down well. I was asked by Airfix to provide the research on this one, which hopefully will result in the best Vulcan out there. Working alongside the designer has been fun and while there are still some tweaks to apply, it's certainly getting there. Please don't ask for any specifics at this point as a firing squad would have be the answer... Melchie Edited November 9, 2019 by general melchett 21 1 3 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted November 9, 2019 Share Posted November 9, 2019 21 minutes ago, Thomas V. said: Have no doubt that its going to be huge seller, my only wish is that like Victor is labelled made in Britain, thus far better injection process and higher quality plastic. Probably one of the most sensible suggestions written of late. The Victor's surface detail is superb, surely the Vulcan deserves the same attention even if production and flow on retail costs need to be raised to cover it. Cheers.. Dave Link to comment Share on other sites More sharing options...
Paul H Posted November 9, 2019 Share Posted November 9, 2019 I really didn't think it would be the Vulcan, given the old one is currently listed for pre-order on Airfix's website, but am very glad to be proven wrong, as I will certainly be buying the new one! Link to comment Share on other sites More sharing options...
Adam Poultney Posted November 9, 2019 Author Share Posted November 9, 2019 9 minutes ago, general melchett said: Hi chaps, I'm glad the model has gone down well. I was asked by Airfix to provide the research on this one, which hopefully will result in the best Vulcan out there. Working alongside the designer has been fun and while there are still some tweaks to apply, it's certainly getting there. Please don't ask for any specifics at this point as a firing squad would have be the answer... Melchie Nice! Did you provide any research that hasn't shown up in CAD/model form yet, no specifics as you said but an exciting yes, little yes or no would do 😂 If they haven't asked about B1s please let them know that there are those here who would buy a great number of them, including @robvulcanand myself, and it seems a few on Facebook as well who wanted a B1 1 Link to comment Share on other sites More sharing options...
gavingav1 Posted November 9, 2019 Share Posted November 9, 2019 4 hours ago, RichG said: Is it just me or is there something about the association of Airfix with the Vulcan that sorta feels right - made for each other. Oh and whilst we are just spotting details, anyone notice they seem to have done intake covers too for those that want to add a splash of colour to an all white scheme or perhaps avoid tricky masking on the camouflage aircraft. I love it when Airfix add those little details. Well done guys for making my wish list smaller each year . Now whilst we are on the subject of jet bombers, about that Canberra B2/B6 in 1/72... (just joking...) Rich i wonder how many of us who own a few of the older kit will rob these intake covers to cover the intakes on the old tool 7 Link to comment Share on other sites More sharing options...
tonyot Posted November 9, 2019 Share Posted November 9, 2019 (edited) Great to see a new Vulcan,...... those asking,.... what next,........ well we need another RAF 4 engined heavy which has seen service all over the world and with countless other nations too,..... in all sorts of wars and campaign`s,........ yes,....... the C-130 Hercules!!! Edited November 9, 2019 by tonyot 7 Link to comment Share on other sites More sharing options...
Ruskin Air Services Posted November 9, 2019 Share Posted November 9, 2019 I see our modelling prayers have been answered, Airfix are in the process of designing and tooling a new Avro Vulcan for release November 2020. Check out the 3D rendering on their website 1 Link to comment Share on other sites More sharing options...
dalea Posted November 10, 2019 Share Posted November 10, 2019 Bet it won't stop the Airfix 2020 thread Link to comment Share on other sites More sharing options...
Murph Posted November 10, 2019 Share Posted November 10, 2019 Bout time. Link to comment Share on other sites More sharing options...
Wm Blecky Posted November 10, 2019 Share Posted November 10, 2019 5 hours ago, Ruskin Air Services said: I see our modelling prayers have been answered, Airfix are in the process of designing and tooling a new Avro Vulcan for release November 2020. Check out the 3D rendering on their website No offense, but to who's modeling prayers are you referring? Certainly not mine. I can think of any number of other kits that I'd sooner see materialize well before this one. Honestly, the Vulcan would not even place on any list of mine. 3 1 4 Link to comment Share on other sites More sharing options...
NAVY870 Posted November 10, 2019 Share Posted November 10, 2019 9 hours ago, Admiral Puff said: Repeat after me (ad nauseum): V E N O M ... (Although a new Canberra B.2/6/20 would be nice, as well ...) I SEA what your doing there. 4 1 Link to comment Share on other sites More sharing options...
delticfan Posted November 10, 2019 Share Posted November 10, 2019 Bout time too lol Link to comment Share on other sites More sharing options...
Robert Posted November 10, 2019 Share Posted November 10, 2019 19 hours ago, WV908 said: Erm, is that a cast nose weight?!? Cheers, WV908 The designer said, they have made a separate piece so you can fill it with your choice of material which you can then attach to the bulkhead to keep the nose down, as shown in the cad. Regards Robert 1 1 Link to comment Share on other sites More sharing options...
delticfan Posted November 10, 2019 Share Posted November 10, 2019 Totally agree with the C130 for RAF. Also Jaguar, VC10, Wessex, can’t think of anymore but I’m sure there is. Oh a nice ground equipment and vehicles set from the late 70s early 80s would be cool. 2 1 Link to comment Share on other sites More sharing options...
Wez Posted November 10, 2019 Share Posted November 10, 2019 1 hour ago, delticfan said: Oh a nice ground equipment and vehicles set from the late 70s early 80s would be cool. To include some Liney's in various poses such as pushing the Houchin into position, carrying out a percussive adjustment on "x" piece of equipment or just scratching their heads wondering just how the aircrew just managed to break the groundcrew's precious charge! Bound to be a winner! 1 2 Link to comment Share on other sites More sharing options...
Meatbox8 Posted November 10, 2019 Share Posted November 10, 2019 1 hour ago, Wez said: To include some Liney's in various poses such as pushing the Houchin into position, carrying out a percussive adjustment on "x" piece of equipment or just scratching their heads wondering just how the aircrew just managed to break the groundcrew's precious charge! Bound to be a winner! I'd really like to see some aircrew/groundcrew figures from the 50s and 60s preferably not in 'action' poses. When you see photos of aircraft on flightlines etc there are often a couple of bods sort of standing around as opposed to running, waving or doing something. 2 Link to comment Share on other sites More sharing options...
Wez Posted November 10, 2019 Share Posted November 10, 2019 1 minute ago, Meatbox8 said: When you see photos of aircraft on flightlines etc there are often a couple of bods sort of standing around as opposed to running, waving or doing something. I think you are confused sir! The groundcrew are always doing something... ...quite what is another matter! 7 Link to comment Share on other sites More sharing options...
Meatbox8 Posted November 10, 2019 Share Posted November 10, 2019 1 minute ago, Wez said: I think you are confused sir! The groundcrew are always doing something... ...quite what is another matter! Of course. They are probably mentally pre-planning how they are going to unbend 'their' aircraft when the pilot gives it back. 2 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now