thorfinn Posted October 27, 2019 Share Posted October 27, 2019 Wasn't sure whether to put this under 'Vehicles' or 'Space,' but it's a ground vehicle, so here goes. During the Apollo program, NASA began using a fleet of (4) M113 Armored Personnel Carriers, acquired from the US Army, as launch-adjacent emergency rescue and firefighting vehicles. This practice continued through the Space Shuttle program, when all members of scheduled shuttle crews -- as a required part of their emergency procedures training -- were taught to drive the M113s, in case some launch emergency (presumably just short of a catastrophic one) should permit the escaping crew to board the empty-and-waiting 'standby' vehicle, to evacuate the launch area with some degree of speed and protection. By all accounts, these 'driving lessons' were one of the most entertaining parts of the astronauts' training. The vehicles could regularly be seen careening around the Cape Canaveral complex's many remote tracks and access roads, kicking up clouds of sand and debris as each astronaut 'trainee' came to terms with the unfamiliar lever controls of the tracked vehicles. In this NASA photo, the next scheduled shuttle launch crew seems to be enjoying themselves immensely as Chief of Fire Training George Hoggard (with reversed cap, making the 'give her the gun' gesture) supervises the training session. I selected Trumpeter's 'standard' M113 in 1/72 scale to build one of these distinctively-liveried NASA vehicles. The kit has a wonderfully-complete interior for the scale, including a respectable engine/transmission and outfitted crew compartment in back...but, oddly, no hint of a driver's position beyond an empty space. I scratchbuilt the basic control details, and added some home-made decals for the various interior warning signs and labels. Externally, I left off or removed various molded-in combat-related and stowage details like the commander's machine gun mount and tool racks and fuel cans. NASA's vehicles were pretty 'stripped down' versions with no need for combat and field accoutrements. The only scratchbuilt details added here were the headlights and their guard frames (to replace the rather anemic kit parts), the empty mounts for the smoke grenades (which were still present, on the vehicle I was portraying), and a rear-mounted 'loudspeaker' horn visible in photos. (Not entirely sure whether this last is a standard M113 fixture or a NASA addition, but it's there.) Paints were mixed from Tamiya acrylics. All decals were home-made. The oddly-shaped 'speckles' (at least in 1/72 scale) liberally scattered over the 'stripe' areas on every surface are the mission patches for each proud launch crew which trained in these vehicles. Of the three oft-photographed APC's, #3 seems to have been the one 'ceremonially' chosen to be decorated in this fashion, since #1 and #2 look 'clean' in most photos. Even on #3, the location and assortment of these patch decals seems to vary widely from photograph to photograph...presumably due to service-wear and ongoing cleaning/maintenance of the well-used vehicles. To display my tiny beauty I whipped up a little vignette base, based on a real photo. While a 'shuttle' oriented locale might have been more appropriate...Cape Canaveral's 'Complex 14' had a cooler sign, and a compelling history. It was the main launch complex used in the early days of the US Space Program, including the Atlas Mercury launches. The 'parking spaces' featuring the Mercury astronauts' names are part of the gate area of the now-torn-down complex, which was restored in the last decade as part of the tourist-accessible areas of the busy base. 46 Link to comment Share on other sites More sharing options...
Alpha Delta 210 Posted October 27, 2019 Share Posted October 27, 2019 I really like this vignette. Despite seeing lots of programmes about the space program, I had not spotted any M113s! 1 Link to comment Share on other sites More sharing options...
Richard E Posted October 27, 2019 Share Posted October 27, 2019 10 minutes ago, thorfinn said: I selected Trumpeter's 'standard' M113 in 1/72 scale to build one of these distinctively-liveried NASA vehicles. The kit has a wonderfully-complete interior for the scale, including a respectable engine/transmission and outfitted crew compartment in back...but, oddly, no hint of a driver's position beyond an empty space. I scratchbuilt the basic control details, and added some home-made decals for the various interior warning signs and labels. Fantastic little model and vignette - it looks like @Dads203 influence is spreading 1 2 Link to comment Share on other sites More sharing options...
Julien Posted October 27, 2019 Share Posted October 27, 2019 Very nice. The question was asked "does a vehicle with tracks belong n this section?" well yes it can as its clearly in a civilian use and not a Military one, as the poster said it could also have gone in the space section. Julien 1 1 Link to comment Share on other sites More sharing options...
phildagreek Posted October 28, 2019 Share Posted October 28, 2019 That's pretty cool, good effort! 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted October 28, 2019 Share Posted October 28, 2019 Love it. I'm sure it would also look good on Tracey island. 1 Link to comment Share on other sites More sharing options...
thorfinn Posted October 28, 2019 Author Share Posted October 28, 2019 47 minutes ago, Pete in Lincs said: Love it. I'm sure it would also look good on Tracey island. They'd have to re-number it, though. I think Alan and Scott already have the '3' in use.... 1 Link to comment Share on other sites More sharing options...
Michael Morris Posted May 30, 2020 Share Posted May 30, 2020 On 27/10/2019 at 20:14, thorfinn said: Wasn't sure whether to put this under 'Vehicles' or 'Space,' but it's a ground vehicle, so here goes. During the Apollo program, NASA began using a fleet of (4) M113 Armored Personnel Carriers, acquired from the US Army, as launch-adjacent emergency rescue and firefighting vehicles. This practice continued through the Space Shuttle program, when all members of scheduled shuttle crews -- as a required part of their emergency procedures training -- were taught to drive the M113s, in case some launch emergency (presumably just short of a catastrophic one) should permit the escaping crew to board the empty-and-waiting 'standby' vehicle, to evacuate the launch area with some degree of speed and protection. By all accounts, these 'driving lessons' were one of the most entertaining parts of the astronauts' training. The vehicles could regularly be seen careening around the Cape Canaveral complex's many remote tracks and access roads, kicking up clouds of sand and debris as each astronaut 'trainee' came to terms with the unfamiliar lever controls of the tracked vehicles. In this NASA photo, the next scheduled shuttle launch crew seems to be enjoying themselves immensely as Chief of Fire Training George Hoggard (with reversed cap, making the 'give her the gun' gesture) supervises the training session. I selected Trumpeter's 'standard' M113 in 1/72 scale to build one of these distinctively-liveried NASA vehicles. The kit has a wonderfully-complete interior for the scale, including a respectable engine/transmission and outfitted crew compartment in back...but, oddly, no hint of a driver's position beyond an empty space. I scratchbuilt the basic control details, and added some home-made decals for the various interior warning signs and labels. Externally, I left off or removed various molded-in combat-related and stowage details like the commander's machine gun mount and tool racks and fuel cans. NASA's vehicles were pretty 'stripped down' versions with no need for combat and field accoutrements. The only scratchbuilt details added here were the headlights and their guard frames (to replace the rather anemic kit parts), the empty mounts for the smoke grenades (which were still present, on the vehicle I was portraying), and a rear-mounted 'loudspeaker' horn visible in photos. (Not entirely sure whether this last is a standard M113 fixture or a NASA addition, but it's there.) Paints were mixed from Tamiya acrylics. All decals were home-made. The oddly-shaped 'speckles' (at least in 1/72 scale) liberally scattered over the 'stripe' areas on every surface are the mission patches for each proud launch crew which trained in these vehicles. Of the three oft-photographed APC's, #3 seems to have been the one 'ceremonially' chosen to be decorated in this fashion, since #1 and #2 look 'clean' in most photos. Even on #3, the location and assortment of these patch decals seems to vary widely from photograph to photograph...presumably due to service-wear and ongoing cleaning/maintenance of the well-used vehicles. To display my tiny beauty I whipped up a little vignette base, based on a real photo. While a 'shuttle' oriented locale might have been more appropriate...Cape Canaveral's 'Complex 14' had a cooler sign, and a compelling history. It was the main launch complex used in the early days of the US Space Program, including the Atlas Mercury launches. The 'parking spaces' featuring the Mercury astronauts' names are part of the gate area of the now-torn-down complex, which was restored in the last decade as part of the tourist-accessible areas of the busy base. Great build. I'm thinking of tackling this subject myself. What made you plumb for the Trumpter kit? Trumpter do three versions of the M113, the A1, A2 and A3. Which version M113 kit did you go for? Thanks Link to comment Share on other sites More sharing options...
thorfinn Posted May 30, 2020 Author Share Posted May 30, 2020 24 minutes ago, Michael Morris said: Great build. I'm thinking of tackling this subject myself. What made you plumb for the Trumpter kit? Trumpter do three versions of the M113, the A1, A2 and A3. Which version M113 kit did you go for? Thanks Thanks. To be honest, when the idea popped into my head, the Trumpeter kit was an inexpensive add-on to an online order I was already putting together. I went for the A1, since I knew I'd be dispensing with or removing many of the combat accessories anyway. I'd read a few reviews of the kit on the net...and decided that even if it didn't work out for some reason, it'd be great as a 'proof of concept' hack to try things out with. As it happened, it worked out quite well. (In fact, liked the kit enough that I plan to pick up a few more at some point for some more 'conventional' projects.) Cheers. Link to comment Share on other sites More sharing options...
gt6mkiii Posted May 31, 2020 Share Posted May 31, 2020 Very, very cool - that vignette is just awesome. 1 Link to comment Share on other sites More sharing options...
621Andy Posted March 3, 2021 Share Posted March 3, 2021 Just found this as I've been planning to do a 1:35 version! Very nice job😉 1 Link to comment Share on other sites More sharing options...
Michael Morris Posted March 3, 2021 Share Posted March 3, 2021 I've got the Trumpeter 1/72 scale sitting in my stash now. However, I been looking for the Eduard detail kit for over 9 months now as this has loads of detail missing from the Trumpeter kit. Still looking, but no luck yet. 😟 1 Link to comment Share on other sites More sharing options...
Bandsaw Steve Posted March 4, 2021 Share Posted March 4, 2021 Such an interesting quirky subject! I’d never heard of these vehicles before. So much stuff to learn on this site. 👍 1 Link to comment Share on other sites More sharing options...
TEXANTOMCAT Posted March 4, 2021 Share Posted March 4, 2021 Superb! Never knew this story - well done! TT 1 Link to comment Share on other sites More sharing options...
starseeker Posted March 4, 2021 Share Posted March 4, 2021 This is really brilliant! I'd love to see it parked next to the 1/72 Monogram full shuttle stack. 1 Link to comment Share on other sites More sharing options...
thorfinn Posted March 5, 2021 Author Share Posted March 5, 2021 Always gratifying to see one of these 'favorite project' threads rise from the dead. Thanks to all for your comments and compliments. Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted March 31, 2021 Share Posted March 31, 2021 Id like to do one of these in 1/35, where did you get the decals from ? 1 Link to comment Share on other sites More sharing options...
thorfinn Posted March 31, 2021 Author Share Posted March 31, 2021 10 hours ago, Corsairfoxfouruncle said: Id like to do one of these in 1/35, where did you get the decals from ? Just like last time, Dennis...I made them myself. I'd be happy to send you the files, if you want to give it a go. Cheers 1 Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted March 31, 2021 Share Posted March 31, 2021 1 hour ago, thorfinn said: Just like last time, Dennis...I made them myself. I'd be happy to send you the files, if you want to give it a go. Cheers Yes please. I think I can and if not I know someone that can print them out for me. Link to comment Share on other sites More sharing options...
thorfinn Posted April 7, 2021 Author Share Posted April 7, 2021 On 3/31/2021 at 3:33 PM, Corsairfoxfouruncle said: Yes please. I think I can and if not I know someone that can print them out for me. Haven't forgotten...PM me your e-mail, and I'll be happy to send them along. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now