Homebee Posted September 27, 2019 Share Posted September 27, 2019 (edited) MikroMir is to release a 1/72th Armstrong Whitworth A.W.52 flying wing kit - ref. 72-016 Source: https://www.facebook.com/mikro.mir.dnepr/posts/2647338678677185 3D renders V.P. Edited December 10, 2020 by Homebee 20 Link to comment Share on other sites More sharing options...
Fishbed Posted September 27, 2019 Share Posted September 27, 2019 Well that has woken me up. Interesting................. Tim Link to comment Share on other sites More sharing options...
Mr T Posted September 27, 2019 Share Posted September 27, 2019 Well, that is interesting, will not be small, but a good choice of an unusual aircraft that at least flew rather than non existent Lufwaffe subjects 3 Link to comment Share on other sites More sharing options...
Albeback52 Posted September 27, 2019 Share Posted September 27, 2019 Now, THAT is a bit of an eye opener!! I can already hear the whinges and whines about producing this instead of, well, whatever subject modellers are supposed to be screaming out for! Well done Mikromir. I like this kind of subject and, I can see more than a few "what ifs" appearing over the course of time! Allan Link to comment Share on other sites More sharing options...
general melchett Posted September 27, 2019 Share Posted September 27, 2019 Really nice to see one of these in development, great choice MikroMir. My father saw it fly at the 1948 Farnborough show.......thought it very futuristic for the time and a portent of things to come. 1 Link to comment Share on other sites More sharing options...
Meatbox8 Posted September 27, 2019 Share Posted September 27, 2019 A complete surprise and very exciting. This is a 'must have' for me. Most of the British development/experimental types of the 40s, 50s and 60s are available now in one form or another but the AW.52 was conspicuous by its absence. Can't wait for this. 4 Link to comment Share on other sites More sharing options...
Meatbox8 Posted September 27, 2019 Share Posted September 27, 2019 23 minutes ago, Albeback52 said: Now, THAT is a bit of an eye opener!! I can already hear the whinges and whines about producing this instead of, well, whatever subject modellers are supposed to be screaming out for! Well done Mikromir. I like this kind of subject and, I can see more than a few "what ifs" appearing over the course of time! Allanc The black and grey early Canberra scheme would look good on this, don't you think? I'm a purist however so shall go with a reproduction of the real thing. 1 Link to comment Share on other sites More sharing options...
Albeback52 Posted September 27, 2019 Share Posted September 27, 2019 (edited) 34 minutes ago, Meatbox8 said: The black and grey early Canberra scheme would look good on this, don't you think? I'm a purist however so shall go with a reproduction of the real thing. Whatever we choose, it looks good. I was thinking along the lines of the Suez scheme with black/yellow stripes. Plenty room for under wing goodies and, it might be feasible fit a bomb bay in the centre section? Allan Edited September 27, 2019 by Albeback52 2 Link to comment Share on other sites More sharing options...
Madoc Posted September 27, 2019 Share Posted September 27, 2019 Yup, that's a purchase for me alright! Link to comment Share on other sites More sharing options...
Meatbox8 Posted September 27, 2019 Share Posted September 27, 2019 1 hour ago, Albeback52 said: Whatever we choose, it looks good. I was thinking along the lines of the Suez scheme with black/yellow stripes. Plenty room for under wing goodies and, it might be feasible fit a bomb bay in the centre section? Allan I like it. Maybe an anti-flash white one as well. 2 Link to comment Share on other sites More sharing options...
general melchett Posted September 27, 2019 Share Posted September 27, 2019 Quote Most of the British development/experimental types of the 40s, 50s and 60s are available now in one form or another but the AW.52 was conspicuous by its absence. Very true Meatbox, the only kit of the AW-52 I'm aware of, is the old A+V resin job (accuracy-wise it was a bit wide of the mark, unfortunately), making this one all the more welcome. 3 Link to comment Share on other sites More sharing options...
cngaero Posted September 27, 2019 Share Posted September 27, 2019 Well it's nice to see that the Law of Sod prevails. I've always had a soft spot for British Post War Experimental Prototypes and I have collected a fair number of them in kit form over the years. One of my Holy Grail kits was the A-V Resin AW.52 but I was always thwarted on Ebay by some of the prices that the kit would go for. That was until earlier this year when I finally managed to get one for a reasonable price and not a Kings ransom. I knew that it wasn't the most accurate or well detailed kit, but I had managed to get one.......... cue one happy Chris. Now I find that we are going to get a nicely detailed and more accurate model of the AW. 52 and in 1/72 scale from MicroMir. The same thing happened when I bought and built the Rareplanes Avro Vulcan. Within three months of finishing the beast, Airfix announced theirs. The story of my life. The moral of the story is that if anyone wants an injection molded kit of an obscure, just get me to buy a vacform or resin kit of it and some manufacturer will trot one out in no time at all! I'll still be buying an AW. 52 though. It's a great choice by MicroMir. 4 Link to comment Share on other sites More sharing options...
Admiral Puff Posted September 27, 2019 Share Posted September 27, 2019 1 hour ago, cngaero said: Well it's nice to see that the Law of Sod prevails. I've always had a soft spot for British Post War Experimental Prototypes and I have collected a fair number of them in kit form over the years. One of my Holy Grail kits was the A-V Resin AW.52 but I was always thwarted on Ebay by some of the prices that the kit would go for. That was until earlier this year when I finally managed to get one for a reasonable price and not a Kings ransom. I knew that it wasn't the most accurate or well detailed kit, but I had managed to get one.......... cue one happy Chris. Now I find that we are going to get a nicely detailed and more accurate model of the AW. 52 and in 1/72 scale from MicroMir. The same thing happened when I bought and built the Rareplanes Avro Vulcan. Within three months of finishing the beast, Airfix announced theirs. The story of my life. The moral of the story is that if anyone wants an injection molded kit of an obscure, just get me to buy a vacform or resin kit of it and some manufacturer will trot one out in no time at all! I'll still be buying an AW. 52 though. It's a great choice by MicroMir. Do you have a vacform of an AW Atalanta? Or an Ensign? I'd love to see either, or preferably both, injection moulded in 1:72 ... And yes, I'll be lining up for an AW.52! 1 Link to comment Share on other sites More sharing options...
cngaero Posted September 27, 2019 Share Posted September 27, 2019 30 minutes ago, Admiral Puff said: Do you have a vacform of an AW Atalanta? Or an Ensign? I'd love to see either, or preferably both, injection moulded in 1:72 ... And yes, I'll be lining up for an AW.52! No, but if I buy one, someone like Valom would suddenly produce one. 1 Link to comment Share on other sites More sharing options...
Albeback52 Posted September 28, 2019 Share Posted September 28, 2019 12 hours ago, cngaero said: Well it's nice to see that the Law of Sod prevails. I've always had a soft spot for British Post War Experimental Prototypes and I have collected a fair number of them in kit form over the years. The moral of the story is that if anyone wants an injection molded kit of an obscure, just get me to buy a vacform or resin kit of it and some manufacturer will trot one out in no time at all! I'll still be buying an AW. 52 though. It's a great choice by MicroMir. Hi. Would you therefore be interested in buying the Fantastic Plastic resin Supermarine Type 559? Allan😉😅 1 Link to comment Share on other sites More sharing options...
Meatbox8 Posted September 28, 2019 Share Posted September 28, 2019 15 hours ago, general melchett said: Very true Meatbox, the only kit of the AW-52 I'm aware of, is the old A+V resin job (accuracy-wise it was a bit wide of the mark, unfortunately), making this one all the more welcome. The only other ones I can think of with no kits are the Short SB.4, Gloster E1/44 and the Hunting H.126. Just about all the others are provided for or are in the pipeline. Mind you, some of the ones in the Olimp pipeline have been there for a very long time. Anyway this AW.52 announcement is very welcome. 1 Link to comment Share on other sites More sharing options...
Mr T Posted September 28, 2019 Share Posted September 28, 2019 Maintrack did the E1/44 in vacform a while ago. Not reissued by Whirlybird, possibly because it was not one of the best kits Maintrack did. Still the airframe is fairly straightforward in shape. Link to comment Share on other sites More sharing options...
Head in the clouds. Posted September 28, 2019 Share Posted September 28, 2019 The magic of Micro-Mir strikes again, well done lads and lasses, this is one kit I have been begging for. To those that may moan, all will come to those who wait and this is no exception. Now for those missing kits to come but with the current state of model output we may not be waiting that long, more and more obscure types are being covered in plastic so happy days me says. And yes, I will be purchasing, just a pity it will not be at Telford. Link to comment Share on other sites More sharing options...
IanHx Posted September 29, 2019 Share Posted September 29, 2019 On 9/27/2019 at 10:26 PM, cngaero said: The moral of the story is that if anyone wants an injection molded kit of an obscure, just get me to buy a vacform or resin kit of it and some manufacturer will trot one out in no time at all! I'll still be buying an AW. 52 though. It's a great choice by MicroMir. -hi Chris, are you planning to get a vacform or resin F-108 ? 2 Link to comment Share on other sites More sharing options...
cngaero Posted September 29, 2019 Share Posted September 29, 2019 2 hours ago, IanHx said: hi Chris, are you planning to get a vacform or resin F-108 ? Maybe some time in the future. My next strategy is to start my 1/48 Sanger Vacform Short Stirling and 1/72 Formaplane Handley Page Hastings and once complete, Airfix will announce their new1/48 injection molded kit that will be released in 2021, followed later that year by a 1/72 Hastings!!!!! Link to comment Share on other sites More sharing options...
Ptmvarsityfan Posted September 29, 2019 Share Posted September 29, 2019 Great news as has been said above,Mikromir have given the lover of obscure British post war types a lot of cheer! At 90ft wingspan may be their biggest release to date (the aircraft not the kit hopefully!!). A most interesting aircraft and for some reason almost forgotten now, amazing what the British aircraft industry could produce in the austerity days of the late forties! Read an obituary recently of the pilot who made the first operational ejection of a Martin-Baker seat from this plane. Cheers, Paul Link to comment Share on other sites More sharing options...
Sergey Dulenko Posted May 3, 2020 Share Posted May 3, 2020 For a more accurate decal design, welcome technical inscriptions on the airplane. Link to comment Share on other sites More sharing options...
mike romeo Posted May 4, 2020 Share Posted May 4, 2020 Was there ever a design for an in-service inatantiation of the AW.52 all-wing concept. If so, I'd like to see that kitted. Rgds Martin Link to comment Share on other sites More sharing options...
Sergey Dulenko Posted May 4, 2020 Share Posted May 4, 2020 Slightly visible 5 Link to comment Share on other sites More sharing options...
Robert Posted May 4, 2020 Share Posted May 4, 2020 Hello, the wording on the nose says TRESTLE HERE. I have to investigate the others. Regards Robert 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now