Thomas V. Posted July 7, 2020 Share Posted July 7, 2020 Lots of other kits to build, after this debacle someone will most likely grace us with a new Hind kit that has at least cockpit detail. Link to comment Share on other sites More sharing options...
stakor Posted July 7, 2020 Share Posted July 7, 2020 I bet it won't be twisted as Zvezda is 1 Link to comment Share on other sites More sharing options...
caughtinthemiddle Posted July 14, 2020 Share Posted July 14, 2020 Inbox review of the Begemot set: https://www.kfs-miniatures.com/mil-mi-24-hind-family-kalkomanie-begemot/ 1 Link to comment Share on other sites More sharing options...
exdraken Posted July 15, 2020 Share Posted July 15, 2020 17 hours ago, caughtinthemiddle said: Inbox review of the Begemot set: https://www.kfs-miniatures.com/mil-mi-24-hind-family-kalkomanie-begemot/ a bit hard to understand for me.... anything relevant I can't get by simply looking at Begemot's site? thanks! Link to comment Share on other sites More sharing options...
stakor Posted July 15, 2020 Share Posted July 15, 2020 8 minutes ago, exdraken said: a bit hard to understand for me.... anything relevant I can't get by simply looking at Begemot's site? thanks! Even if you understand Polish the answer is - no. 1 Link to comment Share on other sites More sharing options...
caughtinthemiddle Posted July 15, 2020 Share Posted July 15, 2020 52 minutes ago, stakor said: Even if you understand Polish the answer is - no. Well, I haven't seen any close up pics of the decal sheets on Begemot's site that allow to check the printing quality... 2 Link to comment Share on other sites More sharing options...
71chally Posted July 15, 2020 Share Posted July 15, 2020 Personally speaking, I'm amazed that there isn't a cockpit detail set for this Hind yet, you would think it would be pretty popular. 2 Link to comment Share on other sites More sharing options...
sinistervampire319 Posted July 16, 2020 Share Posted July 16, 2020 7 hours ago, 71chally said: Personally speaking, I'm amazed that there isn't a cockpit detail set for this Hind yet, you would think it would be pretty popular. Or a rivet set as well. 1 Link to comment Share on other sites More sharing options...
exdraken Posted July 16, 2020 Share Posted July 16, 2020 Eduard just released a PE interior set for cockpit and cargo bay. I just ordered it on "Artscale" Hope to let you all know soon in the VTOL / helicopter GB Â 2 Link to comment Share on other sites More sharing options...
71chally Posted July 16, 2020 Share Posted July 16, 2020 It could use a resin cockpit interior, similar to the Pavla and Cobra sets for the old Monogram kit. It's more than just panels, it's seats, pipes, control sticks, panels and boxes etc. I have got the old Pavla set so I might dig it out to see it it can fit the new kit, I just thought a manufacturer would have jumped at doing a new set specifically for the new kit.  2 Link to comment Share on other sites More sharing options...
Shorty84 Posted July 16, 2020 Share Posted July 16, 2020 I'm sure we will be graced with an resin cockpit sooner or later, we just need to be patient. Meanwhile I will try the Quinta Studio 3D decals on mine. Link to comment Share on other sites More sharing options...
luis pacheco Posted July 16, 2020 Share Posted July 16, 2020 23 hours ago, 71chally said: Personally speaking, I'm amazed that there isn't a cockpit detail set for this Hind yet, you would think it would be pretty popular.   https://www.facebook.com/groups/QuintaStudio/photos/ Link to comment Share on other sites More sharing options...
71chally Posted July 16, 2020 Share Posted July 16, 2020 (edited) I know about the Quinta panels, but they don't deal with everything else that's in the cockpit, as I said in my previous post . Also, I like to paint my own instrument panels.    Edited July 16, 2020 by 71chally 1 Link to comment Share on other sites More sharing options...
stakor Posted July 17, 2020 Share Posted July 17, 2020 (edited) 16 hours ago, 71chally said: I know about the Quinta panels, but they don't deal with everything else that's in the cockpit, as I said in my previous post . Also, I like to paint my own instrument panels.    Maybe this will satisfy your needs. Set 1 of 4, next on the way. source https://www.facebook.com/Arma.Models/ Some details - like bulb light protection - missing, but I like it. more stuff than in Eduard.  Edited July 17, 2020 by stakor 4 1 Link to comment Share on other sites More sharing options...
czaralko Posted July 18, 2020 Share Posted July 18, 2020 (edited) I wonder if we would get a decal set like the 1/72 Armycast one    Edited July 18, 2020 by czaralko 3 Link to comment Share on other sites More sharing options...
stakor Posted July 20, 2020 Share Posted July 20, 2020 (edited) And here we have something interesting... Considering the thickness of the PE, such a solution is quite bold, however they write thanks to technology used they achieved thickness of 0.04 mm. It would be good to see it on the model. Â https://arma-models.ru/catalog/fototravlenie/am4840f_fototravlenie_dlya_mi_24v_vp_vneshnie_paneli/ Edited July 20, 2020 by stakor 2 Link to comment Share on other sites More sharing options...
Homebee Posted September 21, 2020 Author Share Posted September 21, 2020 Dedicated Eduard decals - ref. D48056 - Mi-24V around the World 1/48 https://www.eduard.com/eduard/mi-24v-around-the-world-1-48.html   - ref. D48054 - Mi-24V/ Mi-35 in Czech AF service https://www.eduard.com/eduard/mi-24v-mi-35-in-czech-af-service-1-48.html https://www.facebook.com/EduardCompany/posts/3840280285986890   Separate stencils sets can be found under Cat. No. D48060 (Czech) and D48061 (Russian and English). https://www.eduard.com/eduard/mi-24v-stencils-russian-%26-english-1-48.html   https://www.eduard.com/eduard/mi-24v-stencils-czech-1-48.html   V.P. 2 Link to comment Share on other sites More sharing options...
Homebee Posted November 7, 2020 Author Share Posted November 7, 2020 (edited) A multimedia cabin fan - ref. ASQ48020 - by A2 Squared https://asquaredaftermarket.wordpress.com/asq48020/   V.P. Edited November 7, 2020 by Homebee 2 Link to comment Share on other sites More sharing options...
71chally Posted November 7, 2020 Share Posted November 7, 2020 (edited) I'm not ungrateful or anything, this kit really deserves a full cockpit set, and we get a fan, a fan! It's going to look lonely in there. Â Â Edited November 7, 2020 by 71chally 1 1 Link to comment Share on other sites More sharing options...
B.sin Posted November 7, 2020 Share Posted November 7, 2020 3 hours ago, 71chally said: I'm not ungrateful or anything, this kit really deserves a full cockpit set, and we get a fan, a fan! It's going to look lonely in there.    I believe Rez/kit is making a cockpit set for this kit. 2 Link to comment Share on other sites More sharing options...
sinistervampire319 Posted November 8, 2020 Share Posted November 8, 2020 51 minutes ago, B.sin said:  I believe Rez/kit is making a cockpit set for this kit. Word! A rivet set and Alien decals would still be nice too! 1 Link to comment Share on other sites More sharing options...
spruecutter96 Posted November 8, 2020 Share Posted November 8, 2020 2 hours ago, sinistervampire319 said: Word! A rivet set and Alien decals would still be nice too! Never mind blimmin' 1/48th scale! How about some Alien decals in 1/35th? The Trumpy kit would look the canine's candies in this scheme...  Chris. Link to comment Share on other sites More sharing options...
spruecutter96 Posted November 8, 2020 Share Posted November 8, 2020 Or, failing that, how about the "Hungarian Eagle" scheme in 1/35th? I have seen a hand-painted version of these markings and it looked amazing (way beyond my skill-levels, though).  Chris. 1 Link to comment Share on other sites More sharing options...
71chally Posted November 8, 2020 Share Posted November 8, 2020 10 hours ago, B.sin said:  I believe Rez/kit is making a cockpit set for this kit. That's great news, hope it happens. For me that's the one extra I really want.  @sinistervampire319 there is a rivet set available for this kit, details further back in the thread. Link to comment Share on other sites More sharing options...
KayFranz Posted November 8, 2020 Share Posted November 8, 2020 What if you had this? 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now