Jump to content

Kawanishi N1K1, Hasegawa 1/72


Recommended Posts

Hi, I would like to enter into my second GB with Hasegawa's classic floatplane fighter.

I have long been fascinated by this plane: floatplane fighters are one of the most bizarre categories of military aircraft and almost a mission impossible to design. Floats are hard to reconcile with low weights and good aerodynamics. Nevertheless, Kawanishi had done a good job with the N1K1 (based on the equally fascinating E15K fast reconnaissance aircraft). A design so sound that it was later turned into a land-based fighter, the N1K1-J. This must be one of the very few cases when a floatplane or flying boat was converted into a conventionalĀ plane and not the other way round. The only other case, I can think of, was the Piaggio P.166 which was based on the amphibian P.136. Do you know others?

  • Like 6
Link to comment
Share on other sites

2 hours ago, Doc72 said:

This must be one of the very few cases when a floatplane or flying boat was converted into a conventionalĀ plane and not the other way round. The only other case, I can think of, was the Piaggio P.166 which was based on the amphibian P.136. Do you know others?

Oh, this sounds like a fun game!

Ā 

.. some like to make a link between the Supermarine S6B & the spitfire ... but beyond pedigree I think thatā€™s fairly debatable ...

Ā 

Otherwise, what about the Blohm & Voss Ha 139 floatplane, which transitioned to landplaneĀ as the Bv 142.

Ā 

Will keep thinking if thereā€™s others ...

Ā 

GoodĀ luck with the build!

  • Like 1
Link to comment
Share on other sites

18 hours ago, Doc72 said:

Blackburn always seems to be a good place to look for oddities.Ā 

šŸ˜„so true. Ā A relevant case in point: Blackburn B-20 float plane with float that retracts into said plane to become .. flying boat .. I think?

Ā 

Blackburn B-20

Ā 

  • Like 4
Link to comment
Share on other sites

That's really an exotic design. The basic idea is clever, however. Blackburn even worked on a seaplane fighter based on the same principle and taking the Firebrand as a starting point. The resulting B.44 never left the drawing board unfortunately.

In retroperspective, it's really astonishing that Blackburn designed such an outstanding aircraft like the Buccaneer after so many odd and mostly mediocre or worse designs.

  • Like 2
Link to comment
Share on other sites

I actually managed to glue some plastic together and throw paint at it:

pVDAyyg.jpg

Ā 

This is an interesting kit. Instead of instructing you to put some lead into the nose, Hasegawa supplies us with a solid chunk of plastic that fits into the float. Does anyone know if this is sufficiently heavy? Maybe I will drill a hole into it and insert some lead to make sure.

bAs7zha.jpg

Ā 

The only problem so far is that I can't find spruce G. Either Hasegawa forgot to put into into the box or a new and highly voracious subspecies of carpet monster ate it. Most scary, especially because there is no carpet where I am modelling.

  • Like 6
Link to comment
Share on other sites

3 hours ago, Doc72 said:

This is an interesting kit. Instead of instructing you to put some lead into the nose, Hasegawa supplies us with a solid chunk of plastic that fits into the float. Does anyone know if this is sufficiently heavy?

That is novel! Sorry I canā€™t provide the answer, but I would have thought one can trust Hasegawa? .. or is that a little naive!

  • Like 1
  • Haha 1
Link to comment
Share on other sites

Due to the missing sprue I actually had to buy another kit. This has turned out to be an expensive model... At least the decals in the second box have yellowedĀ less.

GyNYlRC.jpgĀ 

Ā 

Looking good so far. And it is no tail sitter, actually it sits quiet comfortably on its little dolly.

ducJo62.jpg

Ā 

I thought about fitting the central float only after painting to save me some masking. However, there is some need for filler so I have glued it at its place already at this stage. The smaller floats on the wing look like they will break away easily so they rest apart for a while, at least until everything is puttied and sanded.

  • Like 3
Link to comment
Share on other sites

On 9/7/2019 at 8:44 PM, Doc72 said:

That's really an exotic design. The basic idea is clever, however. Blackburn even worked on a seaplane fighter based on the same principle and taking the Firebrand as a starting point. The resulting B.44 never left the drawing board unfortunately.

In retroperspective, it's really astonishing that Blackburn designed such an outstanding aircraft like the Buccaneer after so many odd and mostly mediocre or worse designs.

I think I would say fortunate rather than unfortunate.

Ā 

When I was at Pages, I was told that the Buccaneer was largely designed by ex-Handley Page staff who left HP when the Victor design past its peak.Ā  That might explain something...

Ā 

I have a resin and a High Planes Kyofu awaiting significant work, so would be willing to take the unwanted spares off your hand for a reasonable price. Ā Ā  What's on sprue G anyway?

  • Like 1
Link to comment
Share on other sites

5 hours ago, Doc72 said:

Due to the missing sprue I actually had to buy another kit. This has turned out to be an expensive model... At least the decals in the second box have yellowedĀ less.

GyNYlRC.jpg

And now you have another kit to build, once you replace that now missing sprue. Contact Hase...šŸ˜‰

Edited by Thom216
Link to comment
Share on other sites

14 hours ago, Graham Boak said:

I think I would say fortunate rather than unfortunate.

Ā 

When I was at Pages, I was told that the Buccaneer was largely designed by ex-Handley Page staff who left HP when the Victor design past its peak.Ā  That might explain something...

Ā 

I have a resin and a High Planes Kyofu awaiting significant work, so would be willing to take the unwanted spares off your hand for a reasonable price. Ā Ā  What's on sprue G anyway?

The shape of the wing of the Buccaneer and the Victor look similar, so this would support this theory (or this design was just fashionable at the day).

Ā 

Thanks for your offer to take the surplus sprue. Sprue G carries the cowling mainly. Although less than 100 N1K1s were built in real life, Hase produced 3 versions of it, each in different boxing. The difference is mainly in the cowling and the propeller. That is probably why they mixed it up.

Actually, before I promise you the parts, I will wait to finish the model. Maybe I mess up some parts and need replacements.

Link to comment
Share on other sites

I suspect (pretty sure) that the aircraft configuration will have been settled long before any transfer of people, and would only involve a handful of specialists anyway.Ā  I agree that the modifying the sweep outboard was common by the time the NA.39 was conceived, as one of the means of solving the problem of spanwise airflow onĀ  highly swept wings Ā  Increased chord (Vulcan, Hunter, Swift) was another, as were notches and fences.Ā  The Victor just had it first for real - the idea was lifted from Arado work.

Ā 

No rush for any parts, just drop a PM should you have any available at the end.Ā  Thanks.

Link to comment
Share on other sites

  • 4 weeks later...

Just a sign of life here. Actually there has been only limited progress.

Ā 

Now the small floats are on. This is a fairly fragile construction. Ideally Hasegawa should have made a kind ol L-shaped design to anchor the struts in the wing. This would have made it easier to get the angle right, too.

q6fG9MX.jpg

Ā 

And I painted the wooden walkways on the dolly. I am quite satisfied how the wood effect came out. This is the old technique where you apply a solid base coat first, then cover everything in dark oil paint and finally wipe away the still wet oil with a small piece of sponge.

CItr4DD.jpg

Ā 

BTW: does anyone has a good guess about the colour of the dolly? I think the kit's instruction don't give you the colour. Often modeller's choose black, brown or dark grey. The N1K1 restored in Fredericksburg, Tx has a light or medium grey dolly, however. Well, I won't get too pedantic about the colour on Japanese Navy dollys.

Ā 

Ā 

  • Like 6
Link to comment
Share on other sites

The base coat is a mix from some Tamiya sand tones (something like XF-57, XF-59, ...). Of course, for used and weathered wood you could also go more into greys. Actually, I airbrushed the Tamiya paint and let it dry for only 10 minutes or so before I applied a rough coat of artist oils direct from the tube with a tooth stick. Still no problems with the oils attacking the acrylic paint. But I will leave the oils to dry for a couple of days before everything gets a clear coat.

A helpful tutorial can be found here (a little bit moe sophisticated): http://www.aeroscale.co.uk/modules.php?op=modload&name=Sections&file=index&req=viewarticle&page=1&artid=3009

  • Thanks 1
Link to comment
Share on other sites

Well, my attempt at stressed skin. It is meant to replicate the dents and buckling on a real plane made of thin aluminium sheet riveted to frames. It's an experiment. Probably not all that much will be visible after sanding, polishing and a coat of primer.

Ā 

It might be a clichƩ that all Japanese planes werde made from paper-thin aluminium sheet, but a least I will avoid the other clichƩ of huge parts of the paint scheme flaking off everywhere!

  • Like 4
Link to comment
Share on other sites

I was a bit worried with the photo above... I'm now curious to see how it turns out.

Ā 

Good luck with your experiment :)

Ā 

Jaime

Ā 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...