qn30jEkPz7 Posted August 22, 2019 Share Posted August 22, 2019 (edited) Please be kind. I’m firmly at the foot of this particular learning curve so am aware there is a lot could be improved. Sharing just in case folks might be interested rather than for critique I’ve been experimenting with laser cutting, 3D printing and digital design so decided to apply a bit of that to model making (in progress thread here Sharing the most recent output. Convair XP-92 in 1/72 scale. Parts modelled in Fusion 360, printed on a Creality Ender 3 in grey PLA. Assembled with isocyanate and painted with acrylics. Drawings thanks to @Space Ranger and decals kindly donated by @Pat C. Thank you both Edited August 22, 2019 by LostCosmonauts 20 Link to comment Share on other sites More sharing options...
chrisbob12 Posted August 22, 2019 Share Posted August 22, 2019 I have traversed the foothills of 3D printing and design, and I think you've made really impressive progress. Good result! More power to your imagination. I'm tempted to suggest you have a go with ABS: downside is shrinkage, upside is acetone smoothing and generally being able to use solvents which work with polystyrene. 1 Link to comment Share on other sites More sharing options...
Space Ranger Posted August 22, 2019 Share Posted August 22, 2019 (edited) 23 hours ago, LostCosmonauts said: Please be kind. I’m firmly at the foot of this particular learning curve so am aware there is a lot could be improved. Sharing just in case folks might be interested rather than for critique I’ve been experimenting with laser cutting, 3D printing and digital design so decided to apply a bit of that to model making (in progress thread here Sharing the most recent output. Convair XP-92 in 1/72 scale. Parts modelled in Fusion 360, printed on a Creality Ender 3 in grey PLA. Assembled with isocyanate and painted with acrylics. Drawings thanks to @Space Ranger and decals kindly donated by @Pat C. Thank you both It looks great! Glad to have been of assistance. It's the best-looking 1/72 XP-92 around! Unicraft did one some years back, but it's no longer available and wasn't all that great to begin with, I understand. Edited August 23, 2019 by Space Ranger 1 Link to comment Share on other sites More sharing options...
Pat C Posted August 22, 2019 Share Posted August 22, 2019 Nice job and good to see the finished product! Strange looking beast - they changed the cockpit to something more conventional I think? Pat 1 Link to comment Share on other sites More sharing options...
Space Ranger Posted August 23, 2019 Share Posted August 23, 2019 1 hour ago, Pat C said: Nice job and good to see the finished product! Strange looking beast - they changed the cockpit to something more conventional I think? Pat It was completely redesigned to become the XP-92A. 1 Link to comment Share on other sites More sharing options...
qn30jEkPz7 Posted August 23, 2019 Author Share Posted August 23, 2019 10 hours ago, chrisbob12 said: I'm tempted to suggest you have a go with ABS: downside is shrinkage, upside is acetone smoothing and generally being able to use solvents which work with polystyrene. All true and good points. I like that the PLA is bio derived, compostable and low carbon footprint though. Makes me feel slightly better about the endless bits of scrap I make along the way. Maybe do more experimenting with materials a bit down the line 8 hours ago, Space Ranger said: It looks great! Glad to have been of assistance. It's the best -looking 1/72 XP-92 around! Unicraft did one some years back, but it's no longer available and wasn't all that great to begin with, I understand. Much appreciated. The Unicraft one seems to miss out the rockets next to the wing root and really simplify the shape of the inner fuselage. I wonder if they only used one of those drawings you sent me as one of those is similarly simplified. Will open up the cockpit and wheel wells and hopefully have your one printed and off to you by end of next week. 8 hours ago, Pat C said: Nice job and good to see the finished product! Strange looking beast - they changed the cockpit to something more conventional I think? Pat Thanks again. That is a thought... I might come back round to this eventually and try and do the revised XP-92A as I’ve already done the wings etc. for this one *bonus picture since it is sunny this morning* 1 Link to comment Share on other sites More sharing options...
Space Ranger Posted August 23, 2019 Share Posted August 23, 2019 Great picture! I've not seen the Unicraft kit, so my comment about it being not so great was based on hearsay and the one photo of it I found. Unicraft informed me that the mold was no longer usable. By the way, how is the PLA to work, i.e., sand, file, prime, paint, etc.? And if it's compostable, that's a good thing, but I wonder how well it's going to stand up over time sitting on a shelf. Should it be kept out of direct sunlight? I really don't know much about it. (I am eager to add an XP-92 to my delta wing collection, but there is no rush, as I am between cataract surgeries. The left eye was done two days ago, and the right eye will be done in two weeks. Had lasik surgery on the eye as well, and my vision in that ey has gone from 20/200+ (correctable with glasses) to 20/25 overnight and expected to get even better. But the combination of one good eye and one bad eye makes any close work like model building problematic.) Link to comment Share on other sites More sharing options...
qn30jEkPz7 Posted August 23, 2019 Author Share Posted August 23, 2019 4 hours ago, Space Ranger said: By the way, how is the PLA to work, i.e., sand, file, prime, paint, etc.? And if it's compostable, that's a good thing, but I wonder how well it's going to stand up over time sitting on a shelf. Should it be kept out of direct sunlight? I really don't know much about it. (I am eager to add an XP-92 to my delta wing collection, but there is no rush, as I am between cataract surgeries. The left eye was done two days ago, and the right eye will be done in two weeks. Had lasik surgery on the eye as well, and my vision in that ey has gone from 20/200+ (correctable with glasses) to 20/25 overnight and expected to get even better. But the combination of one good eye and one bad eye makes any close work like model building problematic.) It is pretty ok to work with. It is a bit harder than polystyrene (it softens about 80-100 degrees C higher) but sands fine. I just used my normal polyurethane primer, and acrylic filler and paints so didn't present an issue on the modelling front (other than needing filling of surfaces to get rid of the layers) My background is polymer science with a few years as a specialist on biobased materials like PLA - it is easily as light stable as conventional polystyrene and should be fine on the shelf for years. It only degrades if it is very finely shredded or in an industrial composter. If you buried your model in the garden the leading and trailing edges would get scraggy and slowly disappear over a few months but in normal use and display it is fine. Good news on the eye surgery, glad it went well and best of luck with the forthcoming one. Link to comment Share on other sites More sharing options...
Space Ranger Posted August 23, 2019 Share Posted August 23, 2019 Good information, and thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now