Jump to content

Recommended Posts

Hello everyone... well I'm in with this kit. VxnNp2E.jpg

PnFLXRs.jpg

 

RcJbfUs.jpg

 

X2BZoqI.jpg

 

ENYeb6w.jpg

I find it fitting that I'm building a kit of a Tomahawk, and I grew up in a town named Tomahawk Wisconsin so it works for me. The kits decals are for 73 Squadron and i have a set of lend-lease VVS decals i may use. My confusion lies in that i cant find very much on 73 squadron using Tomahawks ? Ive seen Hurricanes in the same time frame this is supposed to be a P-40 Tomahawk unit. Ultimately if I'm not happy with the options id like to find a set of 112 squadron or AVG markings. Im still looking and that might still be a possibility. 

 

Dennis

Edited by Corsairfoxfouruncle
  • Like 3
Link to comment
Share on other sites

Hi Dennis,

 

that is a great plane to build! It is ironical that you got that boxing, when Airfix have two other boxings for 112 Sqdn and AVG!!!

Life can indeed be funny.

 

Will follow for sure!

JR

Link to comment
Share on other sites

7 minutes ago, dogsbody said:

Dennis, is it just a trick of the light and camera angle or does the upper nose part (Part #1) look short-shot on the front left side?

 

Chris

Hey chris just double checked the whole kit, everything checks out. It must be the angle of the piece in the photo because i looked at the photo first and thought the same thing. Thanks for thinking of me and letting me know to check it. 

 

Dennis

  • Like 1
Link to comment
Share on other sites

Hello all... well heres my first day of work on this. o1cVvoA.jpg

 

rsA5hSt.jpg

So after I finished the cockpit i decided i was going to display this with moving surfaces in different positions. So i worked the flaps into an open position and added some detail in the inner wings. 

I2LfbIK.jpg

 

rPMWUQS.jpg

I then cut and modified the ailerons into position. Eventually the rudder and stabilizers will get modified. 

IaSPRSv.jpg

 

mWcTZFj.jpg

The wings leading edge needs a bit of filler as does the seams along the fuselage. For some reason the upper wings didn't want to quite reach the top of the fuselage. So i used the rubber band to give me the dihedral i needed to get the wings to connect.   

QrPyMM0.jpg

 

vmk8kSG.jpg

 

6aA90r5.jpg

Good thing is I've been able to scrounge both early war U.S. stars and Chinese Stars. This opens up my options for markings. I can do an early/pre war P-40. This includes both pearl harbor or Philippines options. I still need to scrounge a sharks mouth if I want to do an AVG or 112 Squadron bird. Questions, comments, thoughts, and or good jokes. 

 

Dennis

  • Like 3
Link to comment
Share on other sites

Did a little more today.uWBItyq.jpg

 

8Hkd0vQ.jpg

Decent kit with just a few little things I'm not a fan of. I really don't like the Mg's they are to flimsy. I may replace them with brass if they snap off. The fit isn't bad but can be soft in some locations. I drilled the .50's barrels out on the nose. Heres a photo op of my current builds. SPhdG2w.jpg

Tomahawk, Harrier, Fw-190, and a Hurricane Mk.1. I never realized just how small the AV-8A's were. Not much longer than the Tomahawk. 

 

Dennis

  • Like 2
Link to comment
Share on other sites

Sanding is done on this, now its just a paint scheme i need to figure out ? Im sitting with 3 Squadron RAAF, 250 Squadron RAF, 73 Squadron RAF, USAAC (pre-war). USAAF Early war Caribbean, Pearl Harbor, or Continental defense. Last up is a Lend lease VVS tomahawk. Now if i opt to hand paint the sharksmouth i can also stretch my options to an AVG Tiger or possibly 112 Squadron tomahawk. Though for the 112 Sq. bird i still need to find codes.  The look to be white in photo's but could be very bleached grey codes ? Anyone know if they're grey or white ? 

Link to comment
Share on other sites

38 minutes ago, dogsbody said:

There's  No. 403 Squadron RCAF.

large_000000.jpg?_ga=2.56202411.12732212

And this:

 

Curtiss Tomahawk RCAF 414Sqn RU V AK185 UK 1941-03

Curtiss-Tomahawk-RCAF-414Sqn-RU-V-AK185-

Chris

Hello Chris... I've done 403 already. Though let me ask you this. Are the codes & lettering grey or white with 403 & 414 ? If white i can probably scrounge them ?  

m9rdggt.jpg

Other than that I have a few I'm favoring and one is a photo-recon bird in the Caribbean in 1942. I do like the 250 and 3 Squadron options as well. And last is a Pearl harbor bird ? 

 

Dennis

Link to comment
Share on other sites

I'd have guess and say they'd probably be that sky/grey colour (not an expert on RAF colours) as the spinner is lighter and probably white. Plus the white ring in the roundel is a give away as well.

  • Thanks 1
Link to comment
Share on other sites

On 8/26/2019 at 10:14 PM, dogsbody said:

There's  No. 403 Squadron RCAF.

And this:

Curtiss Tomahawk RCAF 414Sqn RU V AK185 UK 1941-03

Hello Chris after doing research on these squadrons. ⬆️  I suddenly realized i could check out RCAF Hurricane units. So I dug around and found Troy's post. I thought you also had/have a thread about them ? 

Ive been trying to figure out the scheme/markings for the Hurricane Mk.I i am building. I think i will be going with 401 Squadron, which was 1 Squadron RCAF initially. I have the codes with some minor finagling and it settles my needs quite well. Thank you for pointing me in that direction. As for the Tomahawk I'm still debating because i don't have codes to do either 403 or 414 unless i get real fancy and make masks. But these two ⬆️ are still in the running with 3 squadron RAAF & 250 squadron RAF. 

 

Dennis

  • Like 1
Link to comment
Share on other sites

Hello everyone... well i got to try my new Iwata out today. All i can say is WOW, so quick and easy to clean and change out colors. I painted 4 models (This, Hurricane, Fw.190, and Harrier) in about 60 minutes. Not completely but got the base colors down. I will still use my older Iwata for big areas as it needs to use a jar of paint(suction feed). So heres the Sky type S on the belly of the Tomahawk. 

YXoJ6wv.jpg

I painted the same color on my Hurricane build.

PLFk1Km.jpg

Will wait a day or two for this to cure as i need clear it. While its curing/drying i can mask and set up the canopy for the Tomahawk and Hurricane. Questions, comments, and or thoughts ? 

 

Dennis

Edited by Corsairfoxfouruncle
Link to comment
Share on other sites

The 403 squadrons aircraft were finished in the Curtiss equivalents of dark earth, dark green, and sky(actually a light gray).

The spinner and fuselage band were True Sky.

 

Sorry I didn’t notice this sooner for you.

Link to comment
Share on other sites

6 minutes ago, Beazer said:

The 403 squadrons aircraft were finished in the Curtiss equivalents of dark earth, dark green, and sky(actually a light gray).

The spinner and fuselage band were True Sky.

 

Sorry I didn’t notice this sooner for you.

Thanks Beazer... yes i remembered it after the fact myself. Im going to go with the repaint in British colors after an maintenance overhaul story. :whistle: Yes its not 100% accurate but i can live with it. Still up in the air over 73, 3 RAAF, 403, or 414 though. I've got photo's of 3 RAAF in these colors so they're an option ? 

 

Dennis

Edited by Corsairfoxfouruncle
Link to comment
Share on other sites

Hello everyone... finished a 2nd session on the models tonight. I sprayed both the Tomahawk and Hurricane with Dark earth. I know the color comes across as a greenish hue but its brown. I think its a trick of light due to the flash photography. VMqfZZU.jpg

 

Jmtj2Pj.jpg

 

aAXsztv.jpg

Will clear the models tomorrow afternoon, then i can mask for green on them tomorrow night. Questions, comments, and or thoughts ? 

 

Dennis

 

PS - Ive since narrowed it down to 3 Sq. RAAF, 73 Sq. RAF, and 403 Squadron from Canada. As 414 formed in August of 41. So they're out of the running. 

Edited by Corsairfoxfouruncle
  • Like 4
Link to comment
Share on other sites

Hello everyone... I took a couple of day's off due to some bug i caught. Im still not 100% but good enough to due the next session on my work. I was able to spray the Dark Green today in this case Tamiya. OrJaUsD.jpg

I have since cleared over this to get a more uniform sheen. pwGOc4b.jpg

 

x2ynG9D.jpg

Sorry for the way to shadowy photo's of the sides i tried to manipulate them but the color's wound up being way off. Please feel free to post Thoughts, questions, and or comments. 

 

Dennis

  • Like 4
Link to comment
Share on other sites

Hello everyone.. well after my Harrier fun yesterday i got much better response from the Airfix decals i used today. I did most of the main markings today on the Tomahawk, and will do some stencils tomorrow. Ultimately in the end i chose 3 Squadron RAAF. arGlaLr.jpg

 

wISRjvS.jpg

 

H2Bu3uw.jpg

 

Qkk2vkt.jpg

I did this because i am doing 401 Squadron RCAF with my Hurricane, and I've done 403 Sq. RCAF before. In case you are curious here is the Hurricane. 

VaIo716.jpg

 

jL0RsZd.jpg

 

Ekewnfm.jpg

 

3N4aIgJ.jpg

Questions comments and or thoughts ? 

 

Dennis

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...