Jump to content

Tron 1/18 Ferrari 512 BB


Recommended Posts

Here is my latest commission project, this one is a 1/18 scale Tron Ferrari 512 BB 1978 LeMans resin kit. 

IMG-20190727-174745.jpg

It is going to be built straight out of the box as the customer doesn't want any extra detail work adding.  With it being a curbside body there isn't much that could be added anyway other then maybe some extra work around the dash and seats. 

IMG-20190727-155443.jpg

The resin mould is pretty good, i've seen better but after a little bit of tidying up its just about ready for paint. As is pretty standard with my builds I will be using the Zero paints brand on this build. 

IMG-20190727-173330.jpg

Everything else is pretty standard for a multimedia kit, parts have a good level of detail on them and after some cleaning up should produce a nice model. 

Thanks
Chris
http://www.wardsmodelbuilder.com
[email protected]

Link to comment
Share on other sites

  • 1 month later...

An update on the progress, 

After a lot of sanding and priming I was finally happy with the quality of the bodywork. The body panels on this kit were not either smooth of level but once that was sorted the red went on very well, and makes the effort worth it. 

IMG-20190914-143725.jpg

Once that was fully dried I was able to mask off for the lower half black sections. 

IMG-20190920-113923.jpg

and paint them black, 

IMG-20190920-190559.jpg

I have now added all the bodywork decals as the lacquer on this build is going over them. 

IMG-20190921-172230.jpg

So far, so good. I have also been working on the interior which I will cover in the next update whilst the clear on the body is drying. 

Thanks
Chris
www.wardsmodelbuilder.com
[email protected]

  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...
On 9/26/2019 at 7:25 PM, Schwarz-Brot said:

Beautiful. And the paint looks really smooth. Will it stay that silky or will it be finished in a high gloss?

It will have a hi gloss when finished. That photo was prior to clearing, which I don't usually do over decals. 

Here is what will probably be the last update before this one is finished. The body has now been clear coated and the decals have held up very well with no damage.  It has been drying for over a week so should be ready for sanding out the imperfections now. 

IMG-20191004-103506.jpg

The customer decided he wanted something added to busy up the interior a little, so I have added a little wiring and plumbing bits. 

IMG-20191004-103711.jpg 
IMG-20191004-103727.jpg

I think this will add a nice finish to the model, which has turned out to be a very enjoyable build. The kit isn't as polished as a Studio 27 kit however it still makes a very solid model. 

Once the bodywork is sanded and polished I will finish up by adding the exterior fittings, and bringing the two halves together. 

Chris
http://www.wardsmodelbuilder.com
[email protected]

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...

Here are a few photos of the finished model. 

IMG-20191023-134622.jpg

Everything went together quite easily but I did have some issue with the windows that, to be truthful just aren't very good in this kit. 

IMG-20191023-134631.jpg

IMG-20191023-134732.jpg

Other than the windows, all the other parts fitted together very well, and the additional detail pieces such as the side number lights and windscreen clips are a nice touch (included in the kit).

IMG-20191023-134718.jpg

IMG-20191023-134638.jpg

Turned out pretty well, for a stock build, which is all the customer wanted for this one. 

Thanks
Chris

 

www.wardsmodelbuilder.com

[email protected]

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...