nimrod54 Posted July 3, 2019 Share Posted July 3, 2019 This FROG Trail Blazers boxing of Charles Lindberg's Spirit of St. Louis is going to be my second entry to the group build and here are the photos of the box and its contents. by John L, on Flickr by John L, on Flickr by John L, on Flickr and a final shot of the parts that have broken away from the sprues and the decals. by John L, on Flickr With no plans for any extras, other than maybe some scratch building, this will be a quick out of box build. 6 Link to comment Share on other sites More sharing options...
Hockeyboy76 Posted July 3, 2019 Share Posted July 3, 2019 @nimrod54 said “With no plans for any extras, other than maybe some scratch building, this will be a quick out of box build.” 1 6 Link to comment Share on other sites More sharing options...
stevej60 Posted July 3, 2019 Share Posted July 3, 2019 Great to see this one in the mix too John,looks a nicely molded kit despite it being an early Frog kit. 1 Link to comment Share on other sites More sharing options...
Richard Humm Posted July 3, 2019 Share Posted July 3, 2019 My local branch of The Works was selling the Haynes Manual for the Spirit of St Louis for £4 in their current sale - it might be worth looking for if you have a branch nearby. 1 Link to comment Share on other sites More sharing options...
Jeepboy Posted July 3, 2019 Share Posted July 3, 2019 I recall in 1978ish it made a great little model. As a kid I couldn't understand why there was no windscreen. I thought I was doing it wrong so had to go to the library to get books. (Oh those pre-internet days of cycling to the library before they closed). 4 Link to comment Share on other sites More sharing options...
JOCKNEY Posted July 3, 2019 Share Posted July 3, 2019 I remember the film but never built the aircraft, James Stewart I believe ? Really looking forward to seeing you bring this one to life Cheers Pat 3 Link to comment Share on other sites More sharing options...
AdrianMF Posted July 4, 2019 Share Posted July 4, 2019 Strange that you don’t get a standing Lindbergh figure like you do in the other trail blazer kits. The plastic looks good though. Regards, Adrian 1 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted July 4, 2019 Share Posted July 4, 2019 Well done John, this is an excellent selection and those old parts do look nice and crisp in comparison to some Novo kit's I've come across. I'm sure you will do this kit the justice it so richly deserves. Cheers.. Dave 3 Link to comment Share on other sites More sharing options...
Jinxman Posted July 4, 2019 Share Posted July 4, 2019 Really looking forward to seeing this come together - I have a bagged one in the stash. It might have to be built soon as I picked up a Haynes manual on the type for £4 yesterday after seeing @Richard Humm 's post - some nice references in there. How will you treat the scalloped (?) pattern on the nose? 1 Link to comment Share on other sites More sharing options...
nimrod54 Posted July 4, 2019 Author Share Posted July 4, 2019 17 hours ago, AdrianMF said: Strange that you don’t get a standing Lindbergh figure like you do in the other trail blazer kits. The plastic looks good though. Regards, Adrian Your comment sent me off into a mild panic Adrian. I thought that I had seen a loose seated pilot in the box yesterday but it is not there in the last photo of the loose bits. Having checked I can report that the fly-boy is in the box, but there is no standing figure of Lindy. 13 hours ago, Rabbit Leader said: Well done John, this is an excellent selection and those old parts do look nice and crisp in comparison to some Novo kit's I've come across. I'm sure you will do this kit the justice it so richly deserves. Cheers.. Dave Thanks Dave, there is a small amount of flash on a few of the parts but the rest seem OK for a kit of this age. I am trying to figure out a way to represent a 1/72 engine turned finish on the cowling , I think that it will just be a shiny metal finish to contrast against the doped fabric. 10 hours ago, Jinxman said: Really looking forward to seeing this come together - I have a bagged one in the stash. It might have to be built soon as I picked up a Haynes manual on the type for £4 yesterday after seeing @Richard Humm 's post - some nice references in there. I hope to pick a copy up over the weekend, I should also say thanks to @Richard Humm for the heads-up too. 1 Link to comment Share on other sites More sharing options...
TonyW Posted July 4, 2019 Share Posted July 4, 2019 A classic FROG kit, if ever there was one. Good choice. 1 Link to comment Share on other sites More sharing options...
AdrianMF Posted July 4, 2019 Share Posted July 4, 2019 2 hours ago, nimrod54 said: our comment sent me off into a mild panic Adrian. Sorry! 1 Link to comment Share on other sites More sharing options...
nimrod54 Posted July 5, 2019 Author Share Posted July 5, 2019 16 hours ago, AdrianMF said: Sorry! It's OK Adrian, I just thought that I had given the carpet monster its dinner. 2 Link to comment Share on other sites More sharing options...
nimrod54 Posted July 20, 2019 Author Share Posted July 20, 2019 Having painted the seat and figure a couple of nights ago, I made a start a start on putting this one together today by assembling the fuselage and wings. The empennage was the next to receive some attention, after that I cleaned up the joins before making up the tubular frame for the instrument panel in an effort to fill the empty space in front of Charlie. by John L, on Flickr by John L, on Flickr by John L, on Flickr I don't plan to do much more in the cabin, because little will be seen once everything is buttoned up and adding the frame structure has caused a couple of small issues. When the frame is fixed in position it will sit across the slot for the stand, so that means that my plan to use it needed revising and I will now fill the slot, which will not be a great loss because I don't think that the stand in the box is the right one for this kit. As can be seen in the photo above I have had to rearrange the Lindberg legs to stop them fouling the new internal structure. by John L, on Flickr by John L, on Flickr 7 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted July 20, 2019 Share Posted July 20, 2019 As always John, this WIP is looking most lovely. I would have thought that next to nothing inside would be seen once the fuselage is cemented together which actually appeals to me as it’s one area I detest in 1/72 scale. I do like the original Frog silver plastic, looks to be nice to work with. Cheers.. Dave 2 Link to comment Share on other sites More sharing options...
dad's lad Posted July 20, 2019 Share Posted July 20, 2019 This aircraft never made any sense to me with the complete lack of a windscreen. Must've made take off and landing "interesting" with no direct forward vision. 3 Link to comment Share on other sites More sharing options...
Aardvark Posted July 20, 2019 Share Posted July 20, 2019 2 hours ago, nimrod54 said: Now, I know that FROG influenced the modern Internet sub-culture: Probably creator of this figure: https://en.m.wikipedia.org/wiki/Homunculus_loxodontus Dutch artist Margriet van Breevoort building FROG Spirit of St. Louis, too! 😁 1 hour ago, dad's lad said: This aircraft never made any sense to me with the complete lack of a windscreen. Must've made take off and landing "interesting" with no direct forward vision. Did not the "Spirit of St. Louis" Charles Lindberg have a periscope? B.R. Serge 1 6 Link to comment Share on other sites More sharing options...
nimrod54 Posted August 12, 2019 Author Share Posted August 12, 2019 Whilst trying to drum up some enthusiasm to push on with my Panzer VI build - not very successfully - I thought that I would crack on with this build. The wing is on and after priming then brushing some chrome silver on the nose, I decided that the fuselage joins would require further sanding. I did that remedial work this afternoon then primed again and the model is now ready for the topcoats. by John L, on Flickr by John L, on Flickr 7 Link to comment Share on other sites More sharing options...
John Posted August 12, 2019 Share Posted August 12, 2019 Until I read this thread it had completely slipped my mind that I built one of these when I was a kid. I don't remember seeing this kit at all during my teenage years in the 1970s. I've no idea what happened to mine, played with to destruction no doubt. John 1 Link to comment Share on other sites More sharing options...
nimrod54 Posted August 12, 2019 Author Share Posted August 12, 2019 32 minutes ago, John said: Until I read this thread it had completely slipped my mind that I built one of these when I was a kid. I don't remember seeing this kit at all during my teenage years in the 1970s. I've no idea what happened to mine, played with to destruction no doubt. John If you were anything like me in my early modeller years John, I would have finished a model and then it would be off out to fly it around the garden. 1 Link to comment Share on other sites More sharing options...
John Posted August 12, 2019 Share Posted August 12, 2019 Of course 😁 John 1 Link to comment Share on other sites More sharing options...
Rabbit Leader Posted August 12, 2019 Share Posted August 12, 2019 Nice update John and the kit is looking as pristine during the build stage as we all expect. Cheers... Dave 1 Link to comment Share on other sites More sharing options...
nimrod54 Posted August 12, 2019 Author Share Posted August 12, 2019 49 minutes ago, Rabbit Leader said: Nice update John and the kit is looking as pristine during the build stage as we all expect. Cheers... Dave Thanks Dave, I am still trying to come up with a way of representing the engine-turned finish seen on many aircraft at that time, but I figure that if I get the topcoats on I can have a tinker with some spare plastic as a paint mule to try a few techniques. Surprisingly, what I thought was just a rough surface finish on the nose, on closer inspection appears to have a regular pattern and I now feel that it may be FROG's attempt to represent the engine turning, so that may be a good starting point. 1 Link to comment Share on other sites More sharing options...
Rob G Posted August 13, 2019 Share Posted August 13, 2019 6 hours ago, nimrod54 said: I am still trying to come up with a way of representing the engine-turned finish All knowledge is found here on BM. 42. This is possibly a step too far for you, but it may help you work out an alternative. Gah, wrong post. Try this'un 2 Link to comment Share on other sites More sharing options...
nimrod54 Posted August 13, 2019 Author Share Posted August 13, 2019 Thanks for the link Rob, I have bookmarked it for reference, it is definitely another consideration. I think I may have to trade Molly in for a guide dog when I have finished this build. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now