Jump to content

Pocket Bone! 1/144 Academy B-1B Lancer

Habu12
 Share

Recommended Posts

Meatbox8 Completely Obsessed Member

Meatbox8

Posted
Posted

A beautiful rendition that brings out the sleek and menacing lines of the real thing.  I could quite easily have believed this was 1/72.

  • Thanks 1
Link to comment
Share on other sites
Habu12 Very Obsessed Member

Habu12

Posted
  • Author
Posted

 Academy 1/144 B-1B Lancer
Box
Packaging/Decals/Pubs: 8
Academy has greatly improved their boxart and configuration from its early days. Newer, better boxart, colorful sides and information is presented well. The decals are Cartograph, so no more poor registration issues. However, why Academy has switched to making the instructions in two booklets is beyond me. There is no reason for this. Or, if there is, I’d like to hear what excuse Academy gives. With one in color and one mostly monochrome.
Sprues: 8
Also greatly improved are the sprues, which had no flash. Also the whole MCP multicolored plastic method, similar to Bandai is nice for those of us which don’t plan on painting the kit. Which is about less than 1%, I guesstimate. This wasn’t an issue until later.
Shape: 9
As far as I can tell, there are no major shape issues. The only point taken away is for the scale, because some of the parts would have been far too small to recreate in 1/144.
Subject/Cool Factor: 8
While the B-1B is part of the bomber triad, modern bombers aren’t at the top of the popularity ladder. Sure, B-17s and Lancasters are very popular, but this isn’t one of them. Also, the scale is a good and bad thing about this kit. While it’s small enough to hold in one palm, and it fits inside Detolf cabinets, a lot of detail is lost.
Engineering: 9
Engineered to be a snap kit, it still maintains its lines, and the recessed panels aren’t too large. There were no major fit issues, except for those parts that don’t want to close up fully, which is common with snap kits. Since most of will glue them anyway, the issue resolves itself.
BOX SCORE: 42
BUILD
Fit: 9
No major issues here. The only spot that required extensive sanding were the engine nacelles. Not quite right up to par with the rest. And the snap fit issue discussed earlier. Detail: 8
Again, because of the scale, you don’t get all the detail you would with a 1/72 or 1/48 kit. But for what you do get, I had no problems with it.
Effort: 9
Since this was designed as a snap kit, the ease of build was paramount. It went together in one night, and was ready for paint. Easy peasy. However, the multicolored plastic meant that the wheels were molded in black, not white. I wouldn’t have done it in reverse. Now I had to paint the hubs and the tires. Which is something most do anyway, but....
Value: 8
For such a small kit, it’s a bit more expensive than I thought it should be. $35 retail... that’s a bit much. But we know that a licensing fee is a good portion of that, so I can’t blame Academy wholly.
Fun Factor: 9
Easy, fun, nice subject, what else? Easy to paint as well. I used Caracal decals for my build, since I wanted to build The Dark Knight.
BUILD SCORE: 43
Add it all up and the D score is...85 out of 100
A solid B kit. It’s only let down by its scale, and snap fit engineering. Fun build!

 

Link to comment
Share on other sites
RadMax8 Established Member

RadMax8

Posted
Posted (edited)

Is that a BONE in your pocket, or...

 

Yikes, that went off the rails. I’ve got a family connection with the B-1, both my grandfathers worked at Rockwell in Ohio where parts of the plane were built. Funnily enough, one was in charge of engine nacelle QC, so he may have something to say about this kit!

 

I just saw that this kit recently, and while I would love to build one, $35 is pretty steep for 1/144 scale. Especially considering I  paid $56 for the Revell 1/48 kit about 10 years ago!

 

I forgot to mention what a cracking job you did on the kit! Someone said it looks like it could be mistaken for a larger scale, and I totally agree. Despite the small issues, you managed to build quite a detailed kit with an excellent finish. Also, the write-up was very well executed. 

Edited by RadMax8
Forgot to talk about the actual build!
  • Thanks 1
Link to comment
Share on other sites
  • 5 weeks later...
Tyas Established Member

Tyas

Posted
Posted
On 6/18/2019 at 1:34 AM, Habu12 said:

 Academy 1/144 B-1B Lancer
Box
Packaging/Decals/Pubs: 8
Academy has greatly improved their boxart and configuration from its early days. Newer, better boxart, colorful sides and information is presented well. The decals are Cartograph, so no more poor registration issues. However, why Academy has switched to making the instructions in two booklets is beyond me. There is no reason for this. Or, if there is, I’d like to hear what excuse Academy gives. With one in color and one mostly monochrome.
Sprues: 8
Also greatly improved are the sprues, which had no flash. Also the whole MCP multicolored plastic method, similar to Bandai is nice for those of us which don’t plan on painting the kit. Which is about less than 1%, I guesstimate. This wasn’t an issue until later.
Shape: 9
As far as I can tell, there are no major shape issues. The only point taken away is for the scale, because some of the parts would have been far too small to recreate in 1/144.
Subject/Cool Factor: 8
While the B-1B is part of the bomber triad, modern bombers aren’t at the top of the popularity ladder. Sure, B-17s and Lancasters are very popular, but this isn’t one of them. Also, the scale is a good and bad thing about this kit. While it’s small enough to hold in one palm, and it fits inside Detolf cabinets, a lot of detail is lost.
Engineering: 9
Engineered to be a snap kit, it still maintains its lines, and the recessed panels aren’t too large. There were no major fit issues, except for those parts that don’t want to close up fully, which is common with snap kits. Since most of will glue them anyway, the issue resolves itself.
BOX SCORE: 42
BUILD
Fit: 9
No major issues here. The only spot that required extensive sanding were the engine nacelles. Not quite right up to par with the rest. And the snap fit issue discussed earlier. Detail: 8
Again, because of the scale, you don’t get all the detail you would with a 1/72 or 1/48 kit. But for what you do get, I had no problems with it.
Effort: 9
Since this was designed as a snap kit, the ease of build was paramount. It went together in one night, and was ready for paint. Easy peasy. However, the multicolored plastic meant that the wheels were molded in black, not white. I wouldn’t have done it in reverse. Now I had to paint the hubs and the tires. Which is something most do anyway, but....
Value: 8
For such a small kit, it’s a bit more expensive than I thought it should be. $35 retail... that’s a bit much. But we know that a licensing fee is a good portion of that, so I can’t blame Academy wholly.
Fun Factor: 9
Easy, fun, nice subject, what else? Easy to paint as well. I used Caracal decals for my build, since I wanted to build The Dark Knight.
BUILD SCORE: 43
Add it all up and the D score is...85 out of 100
A solid B kit. It’s only let down by its scale, and snap fit engineering. Fun build!

 

This sounds very DougScore to me.

Amazing build, nonetheless. But for a 1/144 scale that's... quite sizeable. About as long as my 1/72nd F-14B.

  • Thanks 1
Link to comment
Share on other sites
Habu12 Very Obsessed Member

Habu12

Posted
  • Author
Posted
On 7/19/2019 at 10:08 AM, Tyas said:

This sounds very DougScore to me.

Amazing build, nonetheless. But for a 1/144 scale that's... quite sizeable. About as long as my 1/72nd F-14B.

I’ve never denied that I adapted that directly from Dougie Demuro. 😉

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...