Head in the clouds. Posted May 17, 2019 Share Posted May 17, 2019 Something to do with Zepplins and the biscuit was first produced in Grantham, apparently, 2 hours ago, spaddad said: If you think Grantham is interesting in a large van you should try it in a fifteen foot high truck. We do have 2 of the most struck railway bridges in the country, it;s the traffic lights you see, they do not always work. 1 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 17, 2019 Share Posted May 17, 2019 ... no, but interesting biscuit fact. 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 21, 2019 Author Share Posted May 21, 2019 It's update time, Hover tank fans! I plated over that big hole on the top at the weekend so it should be dry by now. In the foreground are the axle plates from one of those tigers, and just behind them I've joined the front top parts of the tiger to a bit of a 1/35th tank. Not quite in focus but this should make things slightly more obvious. Apply TET and this is what you get. Figured out what I'm doing yet? (Besides saving money. Those Tigers cost a quid each!) TA Da! This should give a rough idea. I need to plate over the gap at the back to match up with the peak and apply Milliput here and there. The turret on top is from a box of stuff I bought from the bay. No idea what it was from, but it will end up on here, eventually. (Probably). I'll be back when I've got more done worth looking at. Thanks for looking, and your comments are always welcome. Cheers, Pete 9 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 21, 2019 Share Posted May 21, 2019 Nice! I’d add a little ladder/footholds somewhere. 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 21, 2019 Author Share Posted May 21, 2019 That is the plan, maybe involving staples? We shall see. 1 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 21, 2019 Share Posted May 21, 2019 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 23, 2019 Author Share Posted May 23, 2019 It's another update time. I've got the week off work so have been able to get on with it. It makes a nice change. A long distance shot which takes in the upper hull and turret. Getting closer. The rear upper hull is now faired in with Milliput, it's still wet in this picture. The turret has a hatch from something else. It does fit better than this but will be glued shut anyway. The hatch is one of those ones that lift & swivel on a rod, here under the round bit nearest you. Speaking of hatches, did you notice that I fitted the Tiger tank ones? And here is the deck minus turret to show the 26mm hole I had to make so the turret can swivel. Not quite sure what the bulgy thing on the front is for, perhaps some sort of sensor. It was in the spares box, it fits and it looks right, so it's staying there. As always with these things, I love how disparate parts just fit together with no more than a quick cut or application of the file. This lot should dry overnight so it will be back to the wet & dry again. I need to finish the turret, and figure out a weapon for it. Maybe a chain gun? Although it should really be a recoilless weapon as this thing will be hovering. Thanks for dropping by. More weirdness should follow shortly. Cheers, Pete 5 Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted May 23, 2019 Share Posted May 23, 2019 Hmmm Laser, Rockets with spring loaded release system, that or a Gauss Rifle any of those should work. 1 Link to comment Share on other sites More sharing options...
Head in the clouds. Posted May 24, 2019 Share Posted May 24, 2019 11 hours ago, Pete in Lincs said: I've got the week off work You can't Pete, I need beer for Bank Holiday Monday😓 Weapons, you must be spoilt for choice but how about a Railgun, very modern! 1 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 24, 2019 Author Share Posted May 24, 2019 55 minutes ago, Head in the clouds. said: how about a Railgun I thought they were on strike again? There's plenty of beer to be found out there. Your task, should you choose to accept it....... 2 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 24, 2019 Share Posted May 24, 2019 1 hour ago, Pete in Lincs said: I thought they were on strike again? *70s BR strikes intensifies* 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 24, 2019 Author Share Posted May 24, 2019 As management threaten to remove guards on waiting room fires. 1 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 24, 2019 Share Posted May 24, 2019 IRA BIOLOGICAL WEAPONS? OR BR SANDWICH? It could be either. 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 24, 2019 Author Share Posted May 24, 2019 The clue was, IRA sandwiches had the jam on the outside. 1 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 24, 2019 Share Posted May 24, 2019 JAM Link to comment Share on other sites More sharing options...
Hunter Rose Posted May 24, 2019 Share Posted May 24, 2019 Just keeps getting better and better Pete, its looking really good! 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 24, 2019 Author Share Posted May 24, 2019 Thanks. I've spent today rubbing down filler and sticking greeblies onto the body. It's starting to look pretty technical. I found the weapon parts for the turret I'm using too. It's a small single barrel cannon and I think I'll go with that. A rail gun etc would be nice but it is a very small turret so needs a small weapon. And yes, there is now a ladder on the side. I need to finish the turret and fit an extension to the skirt but hope to take a couple more pictures this weekend. Thanks for looking in. Pete P.S> Password for the day appears to be Jam. Pass it on. Link to comment Share on other sites More sharing options...
Gorby Posted May 24, 2019 Share Posted May 24, 2019 I'm just wondering when your admit that you've lost the box top for this jigsaw. If I didn't know better, I'd think you where making it up as you go along. Have you been making deliveries in Towcester? https://www.bbc.co.uk/news/uk-england-northamptonshire-48402451 1 1 Link to comment Share on other sites More sharing options...
Corsairfoxfouruncle Posted May 24, 2019 Share Posted May 24, 2019 30 minutes ago, Gorby said: Have you been making deliveries in Towcester? https://www.bbc.co.uk/news/uk-england-northamptonshire-48402451 Hang on gorby I'm catching the next flight... I can help clean up 😉 2 Link to comment Share on other sites More sharing options...
Head in the clouds. Posted May 24, 2019 Share Posted May 24, 2019 1 hour ago, Gorby said: I'm just wondering when your admit that you've lost the box top for this jigsaw. If I didn't know better, I'd think you where making it up as you go along. Have you been making deliveries in Towcester? https://www.bbc.co.uk/news/uk-england-northamptonshire-48402451 So that is my mission should I.......you bet 2 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 24, 2019 Author Share Posted May 24, 2019 Nothing to do with me, Guv. I've been off work all week. Jigsaw. Yes I suppose it is in a way. And no, there is no box top. It's all in my head. Shame really, it's probably not safe in there, the sooner I build this the better. And on that note, I managed to get some pictures of the greebly fit so far.... There's a safety bar over the fan housing/wheel on the Tiger decking and an inspection cover behind the turret, plus various stuff on the side. With the front end lit up by a sunbeam, there is a ladder here in the middle and a couple of small bits on the top deck. Now if that rectangular bit looks like a Matador roof with a German halftrack idler masquerading as a fan inside it, that's because it is. There's a grey jobbie just above it but hard to see in this light, and a stowage bin on the left side. More soon, thanks for looking, please wipe your boots before you leave. Pete 6 Link to comment Share on other sites More sharing options...
rockpopandchips Posted May 24, 2019 Share Posted May 24, 2019 Hell on a stick Pete this is looking like pro job, really looking very nice. 1 Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 24, 2019 Author Share Posted May 24, 2019 Why thank you, kind sir. I'm finding it to be very enjoyable. Though I probably need to search ebay for more greeblies! 1 Link to comment Share on other sites More sharing options...
DalekCheese Posted May 24, 2019 Share Posted May 24, 2019 MORE GREEBLIES Link to comment Share on other sites More sharing options...
Pete in Lincs Posted May 27, 2019 Author Share Posted May 27, 2019 I got a couple of hours yesterday and today so here are some more pictures. Another box on the side plus a small ladder, and a smoke grenade launcher each side. I really should have done a before photo for the underside but pressed on instead. Not that many people know what Slave 1's belly looks like anyway. So, take one belly panel and chaindrill until you're thoroughly fed up with doing so. The rectangular slot and five round holes got the treatment. In the rectangular slot I fitted four panzer wheels with plastic card dividers. At the front will be the two items on the left, plus I added the two green bits. See, told you that's what would happen. At far right an idler wheel has jumped into the hole. In the middle you see a green Trumpeter T-55 wheel and a Panzer idler. Together these cover the centre holes. Here's a close up of the front end. The sand coloured centres on the four wheels are from the Tiger kits. And here we are with the belly panel roughly in position. Because I cut the hull to make it taller, I need to narrow this panel. It will also need fairing in around the edges with card and Milliput. I'm not sure if the kreiger hovertanks are supposed to be anti gravity or hovercraft type. All I've done here is fit lots of tank wheels but however it's supposed to hover, I think this was a morning well spent and that it looks more 'tech'. As always, thank you for looking and I hope you're having as much fun as I am. Pete 9 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now