Courageous Posted May 1, 2019 Share Posted May 1, 2019 This kit somehow found its way into my car when I was at Modelkraft Model Show at the weekend. I had never heard of this type but looks rather interesting. First some 'fluff'. The Russian Shavrov SH-2 was an amphibian aircraft in a sesquiplane design that was developed in the 1930's for use as a trainer, fishery protection, patrol and an ambulance. The SH-2 was made primarily of wood and was powered by Shvetsov M-11L 5-cylinder air-cooled radial engine, driving a 2-bladed propeller that was capable of producing 100 hp. Being an amphibian, the SH-2 was fitted with wheels that could be lifted by a hand crank that was fitted on the cockpit dashboard. The cockpit had seats for the pilot plus one other and in the ambulance roll, had room for a stretcher patient behind the seats. Over 700 were built when production started in 1934 and proved very popular with pilots, staying in service until 1964. The kit. The boxart, looks rather cute. 1 plastic sprue. Second sprue. Third sprue. Clear bits. Decals. This will be the first time that I have encountered an Amodel kit and I have few illusions of the work that will be needed with a limited-run kit. A quick inspection of the main sprues show the usual flash and the detail is a little lacking. The glazing is a little thick with a number of options available. Decals look good but only time will tell how well they will go. If anybody knows anything about this puppy that could be useful, chip in. Stuart 20 Link to comment Share on other sites More sharing options...
Jonners Posted May 1, 2019 Share Posted May 1, 2019 That's a really esoteric looking machine; it will be a good talking point when finished. In service until 1964! It must have seemed quite archaic by then. Watching with interest. Jon Link to comment Share on other sites More sharing options...
Courageous Posted May 2, 2019 Author Share Posted May 2, 2019 7 hours ago, Jonners said: Watching with interest. Thanks for the interest. This build is running in parallel with my lunchtime tug build so don't expect a fast build. I use the term ' In service until 1964' rather loosely as we don't know the service is. Apparently, their is one that is still flying and attends air shows occasionally. Stuart Link to comment Share on other sites More sharing options...
Flankerman Posted May 2, 2019 Share Posted May 2, 2019 8 hours ago, Courageous said: Apparently, their is one that is still flying and attends air shows occasionally. It's a replica - I photographed it at MAKS 2005... No close-ups though....sorry! Ken 7 Link to comment Share on other sites More sharing options...
Silenoz Posted May 2, 2019 Share Posted May 2, 2019 Enjoy, seems like a model is hidden somewhere into these sprues.... 1 Link to comment Share on other sites More sharing options...
fjaweijfopi4j48 Posted May 2, 2019 Share Posted May 2, 2019 Hi Stuart I like this one. If you input the name in Cyrillic on a search engine you will get bucketloads of info and images: Шавров Ш-2 (copy an paste on the search engine of your preference) Your presentiments about the Amodel kit will prove to be accurate, no doubt, being a very old release, but Good will eventually triumph. May the Schwartz Be With You. 2 1 1 Link to comment Share on other sites More sharing options...
fjaweijfopi4j48 Posted May 2, 2019 Share Posted May 2, 2019 Two of dozens of Russian sites with info on it: http://www.hobbyport.ru/avia/sh_2.htm http://www.airwar.ru/enc/sww2/she2.html 1 Link to comment Share on other sites More sharing options...
RidgeRunner Posted May 2, 2019 Share Posted May 2, 2019 1 hour ago, Flankerman said: It's a replica - I photographed it at MAKS 2005... No close-ups though....sorry! Ken ah, ha! I was there too Martin 1 Link to comment Share on other sites More sharing options...
Martian Posted May 2, 2019 Share Posted May 2, 2019 Looks like you are in for some "fun", I shall watch with ghoulish delight. Martian 👽 2 Link to comment Share on other sites More sharing options...
Courageous Posted May 2, 2019 Author Share Posted May 2, 2019 (edited) @Moa, thanks for the links and the Cyrillic, much appreciated. Lots of very nice stuff and will give it a good look later. 5 hours ago, Silenoz said: Enjoy, seems like a model is hidden somewhere into these sprues.... 27 minutes ago, Martian Hale said: Looks like you are in for some "fun", I shall watch with ghoulish delight. Cheers guys, you're filling me with lots of confidence. Stuart Edited May 2, 2019 by Courageous 2 Link to comment Share on other sites More sharing options...
RidgeRunner Posted May 2, 2019 Share Posted May 2, 2019 (edited) Its a very attractive little amphibian Edited May 2, 2019 by RidgeRunner 2 Link to comment Share on other sites More sharing options...
Courageous Posted May 2, 2019 Author Share Posted May 2, 2019 Thought I'd take some snips and a scalpel to the parts today. Well, what can one say... limited run kit, warts and all. The parts are quite thick and those seats show that to good effect. Parts are generally quite chunky, the smaller parts will be replaced by scratch options and having recently been pointed to a PE set for this, may make an appearance too. A quick inspection of the major parts; the hull halves and the deck, I find strange 'dog-leg' arrangements on the edges and I can only put it down to part alignment. What ever it is, it isn't helping with part fitting, particularly with the deck/ hull join. Oh what fun. Stuart 7 Link to comment Share on other sites More sharing options...
AdrianMF Posted May 3, 2019 Share Posted May 3, 2019 Wow! Good luck - watching this one... Regards, Adrian 1 Link to comment Share on other sites More sharing options...
Courageous Posted May 16, 2019 Author Share Posted May 16, 2019 While I wait for the PE set to arrive, I thought I'd have a little tinker with some assemblies. Here we have the lower wing/ stabilization floats. Each wing stub was made from two parts where the mating surfaces were not very nice and required thinning and sanding before they sort of fitted. As can be seen, filler and sanding will be required, maybe a few times before we have something good enough. Stuart 9 Link to comment Share on other sites More sharing options...
Jonners Posted May 16, 2019 Share Posted May 16, 2019 Wow, those parts look rough! As you say, Stu, it looks like you're going to have quite a sanding job on your hands, but at least there seems to be plenty of plastic to work on. Not quite what you might expect from a modern kit! Jon 2 Link to comment Share on other sites More sharing options...
Courageous Posted May 16, 2019 Author Share Posted May 16, 2019 1 hour ago, Jonners said: plenty of plastic to work on. Indeed but subjects such as this are always going to be limited run and we are meant to be modellers and not just assemblers... Stuart 1 Link to comment Share on other sites More sharing options...
StephenCJ Posted May 16, 2019 Share Posted May 16, 2019 Very interesting little kit. Just think it to be a different sort of vac and it will come together without hassle, maybe. 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted May 17, 2019 Share Posted May 17, 2019 Bit late joining this one Stuart, but I'll slide in at the back here. A very interesting choice of subject I must say, although given the production run figures of 700 plus, there must have been quite a few around once! Watching this challenge with interest. Terry 1 Link to comment Share on other sites More sharing options...
Courageous Posted May 17, 2019 Author Share Posted May 17, 2019 (edited) 32 minutes ago, Terry1954 said: A very interesting choice of subject I must say You obviously didn't notice my growing interest in float planes when we met at Telford last year...and this is a recent acquisition. Stuart Edited May 17, 2019 by Courageous 2 Link to comment Share on other sites More sharing options...
StephenCJ Posted May 17, 2019 Share Posted May 17, 2019 Pin will probably drop by with some help and I will certainly watch. 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted May 17, 2019 Share Posted May 17, 2019 1 hour ago, Courageous said: You obviously didn't notice my growing interest in float planes when we met at Telford last year Ah yes, now you mention it I do recall you talking about that. Float planes do have a certain appeal I must admit. I don't think I have built one since my old Airfix Arado 196 back in the 70's! Terry 1 Link to comment Share on other sites More sharing options...
TheBaron Posted May 17, 2019 Share Posted May 17, 2019 Very much like these quixotic subjects. Good luck with this Stuart! Don't know if any of the material here is of use or you've already found it? https://www.secretprojects.co.uk/threads/detailed-photos-and-drawings-of-shavrov-sh-2.18079/ 1 Link to comment Share on other sites More sharing options...
Courageous Posted May 28, 2019 Author Share Posted May 28, 2019 (edited) On 5/17/2019 at 7:40 PM, TheBaron said: Very much like these quixotic subjects. Good luck with this Stuart! Don't know if any of the material here is of use or you've already found it? https://www.secretprojects.co.uk/threads/detailed-photos-and-drawings-of-shavrov-sh-2.18079/ Cheers for that. Some nice extra images to work with there, thanks. I have been away from the lunchtime workbench of the SH-2 and was greeted by a few purchases: the PE detail set that looks interesting and a resin replacement engine as I read somewhere that the kit engine is not the right size. I have also been working on the lower winglets; a little filler and sanding. Stuart Edited May 28, 2019 by Courageous 2 Link to comment Share on other sites More sharing options...
Courageous Posted May 29, 2019 Author Share Posted May 29, 2019 (edited) Although I'm itching to get in to the cockpit, I'll finish what I'm doing first. The winglets have had a bit of filler and sanding and just need a little rescribe along the fixing line. For some reason, instead of the wings being a top and bottom configuration, these had rectangular inserts. Due to overly thick inserts and/or the insert recess not being deep enough, parts had to be thinned before the inserts would sit flush. The resulting rectangle will need filling and blended in. The rib detail, isn't raised, it's two parallel lines and I'm yet to decide whether I will fill these too, which is likely, as photos don't show it very well. What I may well do is some subtle masking and painting to show the ribbing detail, we'll see. Centre wing section that also has the engine nacelle, more filling and sanding. Stuart Edited May 29, 2019 by Courageous 5 Link to comment Share on other sites More sharing options...
Courageous Posted June 7, 2019 Author Share Posted June 7, 2019 I have been doing a little bit and there on this little thing, so I thought a little update wouldn't go amiss. Fuselage (or would that be hull) halves eventually fitted but needed a good clean up before hand. Some PPP and sanding was needed inside and out along the keel. A restoration SH-2 showed internal ribbing in the cockpit area, so that's what I'm doing here. If you're wondering, the left cross-member will serve as the stretcher support and the main cross-member is the support for the seats. While we're talking of cockpit's, I thought I'd also crack on with the PE required for. The 'square' part in the centre is the floor-plate with rudder control and is made up from 4 parts. The PE seats look rather smart but had to be modified to make them less wide as the wouldn't fit side-by-side when fitted in cockpit. These are individual seats but I've decided to join them together for easy fitting. The seats have been primed, because i wanted to and will be painted a medium grey, as is most of the cockpit. No belts as far as I can tell were fitted until much later in the aircraft's life. Stuart 9 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now