Jump to content

MH-60S Knighthawk, 1/35 Academy


Recommended Posts

Hi, I'm just going to sneak this in before the site migration (I hope!)

 

This is the Academy/MRC MH-60S Knighthawk in 1/35 scale. It's a big old beast with loads of parts and I also included the Eduard interior and exterior sets. All the paints are Xtracrylix painted over a black base of Mr Surfacer 1500.

 

I used the kit decals throughout - I'd heard they were terrible but luckily mine were all excellent and behaved perfectly using MicroSet and MicroSol.

 

The photos were all taken with my Nokia phone using my newly-acquired lightbox studio!

04eb5cba-80bd-47b5-a236-3a703d609b7f.jpg

0bc03ef6-9c46-43cb-a7bf-ac6c8bbbc247.jpg

 

The kit is large, complex and the instructions were rubbish. That said, the only real trouble I had was with the clear parts. The front canopy and chin windows did not fit very well at all. Also, the naval variant of this well-known kit requires the doors to be replaced, and the replacements didn't fit the exact dimensions of the removed parts. I left the gaps rather than fight the windshield fitting nightmare again! It's no competition winner, but I really enjoyed doing the paintwork, markings and after-effects.

0f91e0cc-f29b-44be-bc7d-d79d4cb19901.jpg

e628736e-51f8-4910-84fa-1f811a573c55.jpg

6d3394c4-1e55-42ed-84d7-87ae21fb4005.jpg

bb726d87-a305-45e9-b22e-5765529a89e2.jpg

af539aaf-7461-4724-b07e-92399700dec6.jpg

2bde8dc1-3a8e-4e50-a9ed-0e0df1d201b7.jpg

To be honest, I was glad to finish this one :)

 

If you looked, thanks for looking!

 

Alan

  • Like 33
  • Thanks 2
Link to comment
Share on other sites

Hello Alan,

Very impressive and robust model. Your light studio and Nokia phone did the rest.

I would advise a (small) flight deck and chains. The model deserves it.

If you have time, take a look at the link.

http://reedoak.com/#!/1-35/c/13281305/offset=0&sort=normal

Regards, Orion / The Netherlands.

  • Like 1
Link to comment
Share on other sites

wow that must be a big beastie , she looks great, I have a mental image of her sitting on a flight deck with some mechanics fussing over her 

Edited by RJ-WobblyHands
  • Like 1
Link to comment
Share on other sites

7 hours ago, Orion said:

Hello Alan,

Very impressive and robust model. Your light studio and Nokia phone did the rest.

I would advise a (small) flight deck and chains. The model deserves it.

If you have time, take a look at the link.

http://reedoak.com/#!/1-35/c/13281305/offset=0&sort=normal

Regards, Orion / The Netherlands.

Thanks Orion, why haven't I heard about that site before? Bookmarked for future reference, it's a figurine goldmine! 

44 minutes ago, RJ-WobblyHands said:

wow that must be a big beastie , she looks great, I have a mental image of her sitting on a flight deck with some mechanics fussing over her 

Now I've bookmarked the Reedoak site that could be a possibility! Thanks very much 👍

 

Alan

Link to comment
Share on other sites

1 hour ago, russ c said:

Great looking `Chopper` there, really nicely done

 

1 hour ago, Vultures1 said:

Really nice work there - well done!

Thank you both very much 👍

Link to comment
Share on other sites

Hello Alan !

Real good first name indeed !!

I enjoy your SH-60 !! God, 1/35 ?? That must be a big beast !!

You did a great job, nice and delicate painting and weathering.

For the doors, let it open, it will be far less noticeable !

Congratulations !! :partytime:

Sincerely.

CC

  • Like 1
Link to comment
Share on other sites

12 hours ago, DaveyGair said:

Helicopter's aren't normally my thing but this looks superb. Great photo's as well, must look into this lightbox studio.

 

:goodjob:

 

Davey.

Thanks! The lightbox is relatively cheap (<£50) and surpassed my expectations! You can get them in various sizes from UK online sellers. I usually build 1/32 so I needed the biggest one I could fit (60x60cm).

11 hours ago, corsaircorp said:

Hello Alan !

Real good first name indeed !!

I enjoy your SH-60 !! God, 1/35 ?? That must be a big beast !!

You did a great job, nice and delicate painting and weathering.

For the doors, let it open, it will be far less noticeable !

Congratulations !! :partytime:

Sincerely.

CC

Thank you! I looked at posing the doors open but didn't fancy scratchbuilding the hinges near the fragile clear part windshield. It's a shame as I had put a lot of detail inside the cockpit.

10 hours ago, keefr22 said:

That is very cool! Top job Alan! :thumbsup:

 

Keith

Thanks very much Keith 👍

  • Like 1
Link to comment
Share on other sites

On 4/26/2019 at 1:58 PM, Mark Strasser said:

WOW! Fantastic build.

Mark

 

On 4/27/2019 at 5:33 AM, Sky Keg said:

Superb Alan!!!!!  Very nice!!!!!!!!! 👍

 

On 4/27/2019 at 1:24 PM, exdraken said:

Very nice!!

 

19 hours ago, Nikolay Polyakov said:

Perfect work, Alan! 👍 The decals went well and the chosen painting scheme looks superb.

 

Cheers! 😎

 

11 hours ago, redcap said:

Cracking job on a subject not often seen.

 

Gary

Thank you all very much. Gary you're right, we need more big scale helos!

 

Alan

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...