BlackAck Posted March 26, 2019 Share Posted March 26, 2019 I’ve managed to snag Trumpeter’s 1:32 P-40B (Tomahawk 2a) for a reasonable price including postage, but what details I would need to add to make a good model of that mark in RAF service? I know that’s a broad question, and it gets to the point of deminishing returns, but I’m open to suggestions. Link to comment Share on other sites More sharing options...
Jure Miljevic Posted March 26, 2019 Share Posted March 26, 2019 Hello BlackAck Off the top of my head ... IIRC Trumpeter 1/32 P-40 B has undersized cockpit so AM replacement might be in order. Otherwise, RAF radio mast and Pitot tube come to mind. Cheers Jure Link to comment Share on other sites More sharing options...
BlackAck Posted March 26, 2019 Author Share Posted March 26, 2019 Thanks for the tip Jure. Do you know if they would have used Sutton Harnesses or the American type? Link to comment Share on other sites More sharing options...
BS_w Posted March 26, 2019 Share Posted March 26, 2019 2 hours ago, Jure Miljevic said: IIRC Trumpeter 1/32 P-40 B has undersized Trumpeter size the cockpit for chinese pilots which had short legs..... 😉 2 hours ago, BlackAck said: Do you know if they would have used Sutton Harnesses or the American type? Sutton Link to comment Share on other sites More sharing options...
Jure Miljevic Posted March 26, 2019 Share Posted March 26, 2019 BS_w beat me to it ... yes, Sutton harness and squared back seat for Tomahawk Mk.IIa. Cheers Jure Link to comment Share on other sites More sharing options...
BlackAck Posted March 27, 2019 Author Share Posted March 27, 2019 Okay. I've done a quick interweb search and found that seats with square backs (described as being 'for Export') are non-existent in 1:32. Is it as simple a lopping off the curve on a 'standard' seat? Regarding Sutton harnesses, I had no idea that there were various types K, QL, QA, QP etc. Does it matter which I use? Link to comment Share on other sites More sharing options...
HBBates Posted March 27, 2019 Share Posted March 27, 2019 4 hours ago, BlackAck said: Okay. I've done a quick interweb search and found that seats with square backs (described as being 'for Export') are non-existent in 1:32. Is it as simple a lopping off the curve on a 'standard' seat? The Export squareback seat used in the Tomahawk was alse used in the early RAF Mk1 Mustang. ..While not the best, the 1/32 Hobbycraft Mustang has this seat. Link to comment Share on other sites More sharing options...
BS_w Posted March 27, 2019 Share Posted March 27, 2019 9 hours ago, BlackAck said: Okay. I've done a quick interweb search and found that seats with square backs (described as being 'for Export') are non-existent in 1:32. Is it as simple a lopping off the curve on a 'standard' seat? Regarding Sutton harnesses, I had no idea that there were various types K, QL, QA, QP etc. Does it matter which I use? Tomahawk could be fitted with two seat types. rounded, the mounting is slightly bent at the top just before the armour plate and the squared type, there was a cast part bolted on armour plate the harness was a Sutton K ( eyelets on lapbelt). Link to comment Share on other sites More sharing options...
Jure Miljevic Posted March 27, 2019 Share Posted March 27, 2019 I understand rounded seats were used mostly on early Tomahawks I and Mohawks, originally ordered by French. Tomahawks IIa had been equipped with squared seats, as HBBates said. Otherwise, thanks for information about Sutton harnesses subtype, BS_w. Cheers Jure Link to comment Share on other sites More sharing options...
BlackAck Posted March 27, 2019 Author Share Posted March 27, 2019 Thanks guys for helping me get to get to the *ahem* bottom of this. Link to comment Share on other sites More sharing options...
Ossington 2 Posted March 27, 2019 Share Posted March 27, 2019 Plate over the gap in the wing upper surface so it continues to meet at the centre-line in a shallow V. This was the true cockpit floor. Make two new side consoles deep enough to meet this new floor. Job done! Link to comment Share on other sites More sharing options...
HBBates Posted March 27, 2019 Share Posted March 27, 2019 (edited) 5 hours ago, Jure Miljevic said: I understand rounded seats were used mostly on early Tomahawks I and Mohawks, originally ordered by French. Tomahawks IIa had been equipped with squared seats, as HBBates said. Otherwise, thanks for information about Sutton harnesses subtype, BS_w. Cheers Jure To my knowledge the early Tomahawks I did not use the roundback seat..its possable but i would have to see a photo The point of the "square back seat" seem was to be genric seat that would accommodate Brit seatpack parachute and French backpack parachutes..(the flat square seatback fits a backpack parachute better then a round curved seat back..that the point of a flat square seatback...also note that the squareback seat ..seatpan is also unique with and indentation in the bottom and bump out on the left with leather lining to meet British requirements for their seat pack parachutes...) You see the square back seat used on Tomahawk, Mustang, Buffalo, Harvard and Yale ..its actually a very common seat..they are still around on today on warbirds today (Harvard and Yale trainers, the EAA XP51 Mustang ) Now before the square back seat... on Hawk 75's sold to France you do see the US type round back seats... modify a bit for the French..so I would not be really surprised to see it in early Tomahawks from the French order..but I can not recall seeing one I've always suspected the square back seat originated with the Anglo-French Purchasing Board Set up in North America in 39 for the British and French to coordinate common buying of war material in north america .. Hence a common aircraft seat that fit both British and French requirements Edited March 28, 2019 by HBBates Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now