Vultures1 Posted March 30, 2019 Share Posted March 30, 2019 20 hours ago, general melchett said: Personally, Modelsvit (and Amodel) are my favourite manufacturers by a country mile. They continue to release superb kits of exotic aircraft, subjects I never dreamt we'd see released as 'mainstream', albeit Limited Run kits...all power to them. The box art doesn't really bother me as much as the contents, but I agree you should have something that really grabs you and makes you want to buy the thing there and then. Hopefully, they'll release the early Su-15 and Tu-14 soon as I'm really looking forward to both of these...then how about a Tu-98 Backfin? Very much looking forward to this F-13 release as with all the others. Fully agreed! I'm looking forward to this F-13 and have mine on backorder with the Big H. I'm really enjoying Modelsvit's output and approach 1 Link to comment Share on other sites More sharing options...
Aardvark Posted May 16, 2019 Share Posted May 16, 2019 Issue # 5-2019 "M-Hobby" magazine published review about MiG-21F-13 from Modelsvit: ( resource photo official publishing house & dealer magazine: https://zeughaus.ru/zhurnal-m-khobbi-52019/ I read electronic version this article. What can I say? In article have compassion fuselage & canopy Modelsvit v.s. Revell. The Revell error in the fuselage section in the cockpit area, which automatically made the Revell canopy in error, is clearly shown in comparison. But we are not interested in Revell, right? 😁 In principle, the model has a new fuselage, an ejection seat, weapons and canopy. Unbuild ejection seat I don't see in article, , only the text and picture of this ejection seat from the technical manual. Intuition tells me that in order to detail the model of this ejection seat, I’ll have to use the photoetched Part or Eduard! 😉 Nothing is written in the article about the absence of compressed air balloons in the wing bays of the main wheel. Nothing is written about the very small gap between the annular nozzle and the nozzle combustion chamber. This is what I had to face in MiG-21F. At the same time, the article complains about the bad docking of the cockpit and fuselage MiG-21F-13. I haven’t reached this point yet, but the dry assembly cockpit & fuselage MiG-21F tells me that everything is fine. Among the shortcomings, the absence of two weather vane out of four per Pitot tube is noted, but for those who have photoetched Part or Eduard, this is generally not significant. In general, no big surprises in this article & this models. A more complete version of this article may appear on the Russian model site Scalemodels.ru , if this happens, of course I will give a link here. B.R. Serge 2 Link to comment Share on other sites More sharing options...
Jackman Posted May 22, 2019 Share Posted May 22, 2019 Forgive my ignorance but which of the 2 Modelsvit Mig-21 kits has 2 cannons? The earlier Mig-21F or the newer release Mig-21F-13? Also, just bouncing an idea in my head, which one will be suitable to convert to a Chengdu F-7 ( the later variants with double delta wings used by Pakistan and Bangladesh)? I can scratchbuild the outer double delta wings and might be able to vacuform the raised canopy and single piece windshield. I just need to know which base model might be better suited: Modelsvit's 'F' or 'F-13'? Thank you. Link to comment Share on other sites More sharing options...
Silverkite Posted May 22, 2019 Share Posted May 22, 2019 (edited) The Mig-21F kit comes with two cannons but you need the F13 kit to build the J-7 this if Chengdu didn't further modifiy the fuselage Luigi Edited May 22, 2019 by Silverkite 1 Link to comment Share on other sites More sharing options...
Aardvark Posted May 22, 2019 Share Posted May 22, 2019 6 hours ago, Jackman said: which of the 2 Modelsvit Mig-21 kits has 2 cannons? The earlier Mig-21F or the newer release Mig-21F-13? @Silverkite absolutely right, MiG-21F - 2 gun, early MiG-21F-13 with short fin and ejection seat as MiG-21F have 1 gun but with K-13 missiles and late MiG-21F-13 have large fin, new ejection seat, 1 gun, K-13 missiles. B.w. if You need more and more gun - MiG-21 without any letters which we know also as prototype E-5 ( in series 10 examples) http://www.airwar.ru/enc/xplane/e5.html carry 3 gun! 6 hours ago, Jackman said: Also, just bouncing an idea in my head, which one will be suitable to convert to a Chengdu F-7 ( the later variants with double delta wings used by Pakistan and Bangladesh)? I can scratchbuild the outer double delta wings and might be able to vacuform the raised canopy and single piece windshield. I just need to know which base model might be better suited: Modelsvit's 'F' or 'F-13'? Is there anywhere a good comparison between the MiG-21F-13 and Chengdu F-7 constructive differences? I saw some drawings of differences MiG-21F-13 vs Chengdu F-7 in Russian magazine , but I don’t really trust those drawings. Probably for conversion best MiG-21F-13, but if but if you bought a Revell and do not know where to put it now, maybe you should consider him as a candidate? Anyway, scribing. Although of course if in this conversion you want to bring the detailing of the Revell to the detailing of the Modelsvit you have a lot of work to do. B.R. Serge 1 Link to comment Share on other sites More sharing options...
AaCee26 Posted May 22, 2019 Share Posted May 22, 2019 10 hours ago, Silverkite said: The Mig-21F kit comes with two cannons but you need the F13 kit to build the J-7 this if Chengdu didn't further modifiy the fuselage Luigi Hi Luigi, I suppose that someone who is able to do a new canopy and outer wings both kits will do. The vanilla F needs wider fin and the F-13 second gun. For later J-7s also a brake shute is needed below the rudder and outer wing racks too. The higher canopy indicates a Chinese ejection seat instead of the SK-1. I recall that there is a J-7 converison for Revell promised by some manufacturer. Cheers, AaCee 1 Link to comment Share on other sites More sharing options...
Silverkite Posted May 22, 2019 Share Posted May 22, 2019 34 minutes ago, AaCee26 said: Hi Luigi, I suppose that someone who is able to do a new canopy and outer wings both kits will do. The vanilla F needs wider fin and the F-13 second gun. For later J-7s also a brake shute is needed below the rudder and outer wing racks too. The higher canopy indicates a Chinese ejection seat instead of the SK-1. I recall that there is a J-7 converison for Revell promised by some manufacturer. Cheers, AaCee I know AaCee, the problem with all of this for me is that as long none comes up, close and personal to the any real life sample of the major variants one can only speculate the differences between them.The spine, rudder and brake chute and also the canopy are the major distinctive traits of the J-7 then it's in the sticks for everything else. I do have a magazine with a J-7 article but outside some generic pics of three variants and a possible drawing of a Pakistani aircraft it doesn't say anything other than what's already written on Wikipedia. Gonna wait for "that" conversion Luigi Link to comment Share on other sites More sharing options...
Aardvark Posted May 22, 2019 Share Posted May 22, 2019 Resource: http://aviadejavu.ru/Site/Crafts/Craft20787-6.htm#pics But I don't know about quality this drawings. B.R. Serge Link to comment Share on other sites More sharing options...
Jackman Posted May 24, 2019 Share Posted May 24, 2019 Luigi, Serge and AaCee, Thanks very much for the info, especially the differences between the F vs F-13 fins. I did not know that. According to wikipedia, it appears that the J-7 was modified from F-13s. So J-7 got the wider fin from F-13. Somewhere along the way, J-7s got 2 x guns from the F but some still had only one gun like the F-13. Thanks again, gentlemen. 2 Link to comment Share on other sites More sharing options...
AaCee26 Posted May 24, 2019 Share Posted May 24, 2019 12 hours ago, Jackman said: Thanks very much for the info, especially the differences between the F vs F-13 fins. I did not know that. According to wikipedia, it appears that the J-7 was modified from F-13s. So J-7 got the wider fin from F-13. Somewhere along the way, J-7s got 2 x guns from the F but some still had only one gun like the F-13. Hi, I have seen description of the different J-7 versions and their modifications in several books about PLAAF and MiG-21s. Obviously none has had enought spare time to write about them into Wikipedia... Basically they started from the F-13 except J-7II and J-7IV (or J-7C and J-7D) which were based on MF sourced from Egypt. I'm waiting for the converswion set for later J-7. Until then I'm likely to utilize a Bilek F-13 with a detailing set from Revell for an early J-7 as I have those alredy in my stock but not yet the Modelsvit kit. Cheers AaCee 1 Link to comment Share on other sites More sharing options...
Troy Smith Posted May 24, 2019 Share Posted May 24, 2019 FWIW http://mig-21.de/english/technicaldataversions.htm reproduced for ease of reference. Quote First Generation Daylight interceptor without radar, armed with guns (one or two 30mm NR-30 respectively), guided or unguided missiles on two wing pylons. MiG-21F (Изделие = product 65) MiG-21F (72) MiG-21F-13 (74) MiG-21F-13 (S-106, built under licence in Czechoslovakia) Versions of the J-7 / F-7 The Chinese MiG-21 copies J-7 (home market) / F-7 (export) can be divided in three generations based on the MiG-21F-13 airframe, a separate development featuring the fuselage of the MiG-21MF as well as a number of twin-seated trainers. Today these types differ in many features from their Soviet predecessors: First Generation Daylight interceptor without radar or with radar range finder, armed with guns (one or two 30mm 30-I respectively), bombs, guided or unguided missiles on two or four wing pylons. J-7 J-7I F-7A J-7II F-7B F-7BS Second Generation All-weather interceptor with radar, armed with guns (two 30mm 30-I), bombs, guided or unguided missiles on four wing pylons. J-7M F-7M F-7P Third Generation All-weather interceptor with upgraded avionics and double-delta wing, armed with guns (one 30mm 30-I), bombs, guided or unguided missiles on four wing pylons. J-7E F-7MG J-7G F-7G J-7III All-weather interceptor with an airframe similar to the third MiG-21 generation, armed with guns (one 23mm-cannon), bombs, guided or unguided missiles on four wing pylons. J-7C / J-7III J-7D / J-7IIIA For small details, there are walkround of various J-7's and MiG-21 to compare. HTH 2 3 Link to comment Share on other sites More sharing options...
foxbot Posted October 18, 2019 Share Posted October 18, 2019 (edited) Special for faithful fan Aardvark Modelsvit decided to release MiG-21 F-13 of Iraq Air Force. Initially planned only Israeli variants. https://www.1999.co.jp/eng/image/10649915/10/1 Edited October 19, 2019 by foxbot 2 Link to comment Share on other sites More sharing options...
Homebee Posted October 19, 2019 Share Posted October 19, 2019 (edited) - ref. 72043 - Mikoyan MiG-21F-13 "007" "Fishbed-C" Also https://www.hannants.co.uk/product/MSVIT72043 V.P. Edited October 19, 2019 by Homebee 2 Link to comment Share on other sites More sharing options...
Homebee Posted November 23, 2019 Share Posted November 23, 2019 (edited) Released - ref. 72043 - Mikoyan MiG-21F-13 "007" "Fishbed-C" Sources: https://www.modelsvit-eshop.modelsvit-shop.com/en/c/aviation-1/mig-21-f-13-007-133 https://www.facebook.com/modelsvit/photos/a.1859368940998815/2497839907151712 https://www.aviationmegastore.com/mikoyan-mig21f-13-007soviet-supersonic-fighter-72043-modelsvit--msvit72043-aircraft-scale-modelling/product/?action=prodinfo&art=166615 V.P. Edited November 23, 2019 by Homebee 1 Link to comment Share on other sites More sharing options...
Milan Hercek Posted January 16, 2020 Share Posted January 16, 2020 New project 1/72 Air Intake & Cone MiG-21F, F13 - Modelsvit kit Main material Aluminium Alloy Link to comment Share on other sites More sharing options...
Ales P. Posted June 13, 2020 Share Posted June 13, 2020 (edited) On 2/7/2019 at 8:00 PM, ya-gabor said: Matchbox did do MiG-21's. But when was that??? Ages ago, based on few sketchy drawings and some b/w photos with questionable dimensions and details. Correct me if I am wrong but it is year 2019 now. A lot has changed since Matchbox, Airfix, Heller or even Revell did a MiG-21 in 72nd scale! Rivets or no rivets, it is far from compulsory to get this kit or any other which has rivets on it. The MiG-21F kit (72021) from Modelsvit did not have rivets. I would expect this new MiG-21F-13 kit to be based mostly on that 21F design. At the same time have to mention that most of their service life the MiG-21F-13 were in natural metal with just a clear varnish protection showing all rivets clearly just as those early Mirage III fighters. Best regards Gabor Hi, For me this Modelsvit kit is: Too expensive for 1/72 kit Level of details is for the 1/48 kit and not for 1/72 because it is too much to use all this medical stuff for build it. What is needed to be done is not done. (rivets on the wing are visible without telescope on the Revell kit). air brake is not open at front, main brake unther fuselage, flaps not as separate parts, etc. Revell kit get O.K. when Pavla set is used to correct it a little. Sometimes I think you get payed to showing all good things on new model. Why you do not show what is bad on it? Too thick canopy, surface details, price. Now I will say what I like on new kit: -one piece wing like on new Eduad kit, detailed engine to be build showing it`s engine and PE parts. My suggestion for you is to contact your colleague Andrey from Modelsvit and ask him to make new 1/48 kit that we are really need. Trumpeter kit is a toy not model. Best regards, Ales I can not post photo of the wing of a real aircraft to show how it looks like. But certainly not like Modelsvit kit has. Edited June 13, 2020 by Ales P. New info Link to comment Share on other sites More sharing options...
Aardvark Posted June 14, 2020 Share Posted June 14, 2020 (edited) 19 hours ago, Ales P. said: Level of details is for the 1/48 kit and not for 1/72 because it is too much to use all this medical stuff for build it. I do not agree. In some aspects, the level of detail is insufficient even for 1:72, as an example inside the wings wheel bay compartment there are no cylinders with compressed air, while the MiG-21 Eduard model has such cylinders at 1:72, moreover, such cylinders, though too small, are available in the Revell model! 19 hours ago, Ales P. said: What is needed to be done is not done. (rivets on the wing are visible without telescope on the Revell kit). air brake is not open at front, main brake unther fuselage, flaps not as separate parts, etc. - air brake is have in Part & Eduard photoetched, those who want to open them can always buy these photoetched sets, though will have to make complex detailing of the compartments yourself. - don't remember, but probably main brake unther fuselage for MiG-21 maked Quickboost. - flaps not as separate parts, for what? B.w. also for what open air brake & flaps, just because someone likes it, but for example I don’t like it, what should I do? It’s not possible to please everyone. In addition, You write that for 1:72 this model is too detailed and then You write that it lacks detailing yet ( "air brake is not open at front, main brake unther fuselage, flaps not as separate") .... is there any discrepancy here? 😉🤔😁 19 hours ago, Ales P. said: Revell kit get O.K. when Pavla set is used to correct it a little. Revell not O.K. because have uncorrect canopy, and you won’t fix it with any aftermarket canopy , because Revell’s fuselage location in the canopy area is also incorrect. 19 hours ago, Ales P. said: Sometimes I think you get payed to showing all good things on new model. Why you do not show what is bad on it? Too thick canopy, surface details, price. @ya-gabor is unlikely to answer you, because for some reason related to his own initiative, he stopped writing on BM. But what about too thick canopy You probably right. Because on Russian forums colleague when assembling the Ye-2A from Modelsvit , encountered the fact that he could not make the canopy in the closed position, and I encountered this on another model Modelsvit that has structural principles common with the MiG-21 family from Modelsvit. Most likely Modelsvit did not test the assembly of their models with a closed canopy. 🤗 Moreover, if You look at my topic of WIP, You will see that I have serious complaints about the accuracy of the tail, and specifically to its excessive area. Similar questions about the excess area of the tail are asked at Russian forums.The absence of a reasoned reaction from the manufacturer regarding the tail, suggests that there is probably a mistake in the model. Therefore, personally from my side there is no silence about manufacturer errors and problems that arise during the building of models of the MiG-21 family from Modelsvit. 19 hours ago, Ales P. said: I can not post photo of the wing of a real aircraft Why? 19 hours ago, Ales P. said: But certainly not like Modelsvit kit has. My, and not only my, interesting to know Your opinion about what You don’t like about the MiG-21 from Modelsvit, with arguments please! B.R. Serge Edited June 14, 2020 by Aardvark Link to comment Share on other sites More sharing options...
Ales P. Posted June 14, 2020 Share Posted June 14, 2020 1 hour ago, Aardvark said: I do not agree. In some aspects, the level of detail is insufficient even for 1:72, as an example inside the wings wheel bay compartment there are no cylinders with compressed air, while the MiG-21 Eduard model has such cylinders at 1:72, moreover, such cylinders, though too small, are available in the Revell model! - air brake is have in Part & Eduard photoetched, those who want to open them can always buy these photoetched sets, though will have to make complex detailing of the compartments yourself. - don't remember, but probably main brake unther fuselage for MiG-21 maked Quickboost. - flaps not as separate parts, for what? B.w. also for what open air brake & flaps, just because someone likes it, but for example I don’t like it, what should I do? It’s not possible to please everyone. In addition, You write that for 1:72 this model is too detailed and then You write that it lacks detailing yet ( "air brake is not open at front, main brake unther fuselage, flaps not as separate") .... is there any discrepancy here? 😉🤔😁 Revell not O.K. because have uncorrect canopy, and you won’t fix it with any aftermarket canopy , because Revell’s fuselage location in the canopy area is also incorrect. @ya-gabor is unlikely to answer you, because for some reason related to his own initiative, he stopped writing on BM. But what about too thick canopy You probably right. Because on Russian forums colleague when assembling the Ye-2A from Modelsvit , encountered the fact that he could not make the canopy in the closed position, and I encountered this on another model Modelsvit that has structural principles common with the MiG-21 family from Modelsvit. Most likely Modelsvit did not test the assembly of their models with a closed canopy. 🤗 Moreover, if You look at my topic of WIP, You will see that I have serious complaints about the accuracy of the tail, and specifically to its excessive area. Similar questions about the excess area of the tail are asked at Russian forums.The absence of a reasoned reaction from the manufacturer regarding the tail, suggests that there is probably a mistake in the model. Therefore, personally from my side there is no silence about manufacturer errors and problems that arise during the building of models of the MiG-21 family from Modelsvit. Why? My, and not only my, interesting to know Your opinion about what You don’t like about the MiG-21 from Modelsvit, with arguments please! B.R. Serge Hi, I think it s the best way to wait on other kit made by Eduard. 1.) Price will be lower than now 2.) Will have all the details we need inside and outside. Hire I think on the surface details on the wings and fuselage, tail, etc. When I write about too much engineering I thought about on the ejection seat and small details in the cockpit. 3.)Maybe we should convert this two models together and get one good model at the end. I know about problems with sink marks and wrong cockpit position but it is no chance to fix it. Best regards, Ales 1 Link to comment Share on other sites More sharing options...
Aardvark Posted June 14, 2020 Share Posted June 14, 2020 27 minutes ago, Ales P. said: I think it s the best way to wait on other kit made by Eduard. Hi, Ales, With Eduard, all difficult and uncertain, they will do the MiG-21F, then they will not do the MiG-21F, or maybe they will do the MiG-21F but only at 1:48, I myself got confused in their plans, if seriously ... 32 minutes ago, Ales P. said: When I write about too much engineering I thought about on the ejection seat and small details in the cockpit. I think that making such a detail Modelsvit just wanted to save the modelers from having to use the aftermarket in the cockpit, in my opinion they succeeded. However, unfortunately, technological capabilities do not allow making one part in plastic what is done by one part in resin. 38 minutes ago, Ales P. said: Maybe we should convert this two models together and get one good model at the end. Revell+Modelsvit? I don’t have a MiG-21F-13 from Modelsvit yet, but there is a MiG-21F from Modelsvit and a MiG-21F-13 from Revell, as it’s easier for me to modify each model separately using separate parts from Modelsvit for Revell, but this is my personal way the man who first bought and started Revell and then bought Modelsvit.🤗 B.R. Serge Link to comment Share on other sites More sharing options...
Ales P. Posted June 14, 2020 Share Posted June 14, 2020 42 minutes ago, Aardvark said: Hi, Ales, With Eduard, all difficult and uncertain, they will do the MiG-21F, then they will not do the MiG-21F, or maybe they will do the MiG-21F but only at 1:48, I myself got confused in their plans, if seriously ... I think that making such a detail Modelsvit just wanted to save the modelers from having to use the aftermarket in the cockpit, in my opinion they succeeded. However, unfortunately, technological capabilities do not allow making one part in plastic what is done by one part in resin. Revell+Modelsvit? I don’t have a MiG-21F-13 from Modelsvit yet, but there is a MiG-21F from Modelsvit and a MiG-21F-13 from Revell, as it’s easier for me to modify each model separately using separate parts from Modelsvit for Revell, but this is my personal way the man who first bought and started Revell and then bought Modelsvit.🤗 B.R. Serge Hi again, Regarding Eduard Mig-21F-13. I am sure they will do it soon, They do not need much to change a few details new fuselage and done. Wings are fine with PF version only smaller UC doors, tail is correct, horizontal stab. are fine also, They are just hard to convinced about. They have make troubles about decision working on 1/72 scale. Now is PF, PFM the best seller! I will try to cross Eduard with Modelsvit also. I will get over trees from PF and select what is good from each model. It is similar building for both kits. B.R. Ales Link to comment Share on other sites More sharing options...
Julien Posted June 14, 2020 Share Posted June 14, 2020 This thread is about the Modelsvit kit, not a discussion on Eduard., revell etc Link to comment Share on other sites More sharing options...
Ales P. Posted June 14, 2020 Share Posted June 14, 2020 1 hour ago, Julien said: This thread is about the Modelsvit kit, not a discussion on Eduard., revell etc With what you will compare this kit? Link to comment Share on other sites More sharing options...
Julien Posted June 14, 2020 Share Posted June 14, 2020 Comparing is OK, we just dont want thread creep into another discussion. Link to comment Share on other sites More sharing options...
Aardvark Posted June 14, 2020 Share Posted June 14, 2020 4 hours ago, Ales P. said: With what you will compare this kit? MiG-21F-13 maked only Modelsvit, Revell, Heller/Airfix, Hasegawa/Academy, Eduard don't maked MiG-21F-13, therefore compassion maybe only this four models, but no hypothetical, future, maybe release Eduard! 😉 I do not see any reason to make a new comparison of the existing MiG-21F-13 models from various manufacturers since it has already been made in the M-hobby magazine, which I wrote about in this posting: 🤗 What else to compare? Technology, designers? Technologies and designers are constantly changing and improving, so it also makes no sense to compare what is now with what will be sometime in the future! 🤗 1 hour ago, Julien said: Comparing is OK, we just dont want thread creep into another discussion. Really, don't understand, need maked new topic with compared differences models MiG-21F-13 or this topic already somewhere have on the BM? If such a topic is already on BM, then is it possible to just give a link to it in this discussion, so that similar discussions do not arise in this topic, in the future? B.R. Serge Link to comment Share on other sites More sharing options...
Ales P. Posted June 14, 2020 Share Posted June 14, 2020 4 minutes ago, Aardvark said: MiG-21F-13 maked only Modelsvit, Revell, Heller/Airfix, Hasegawa/Academy, Eduard don't maked MiG-21F-13, therefore compassion maybe only this four models, but no hypothetical, future, maybe release Eduard! 😉 I do not see any reason to make a new comparison of the existing MiG-21F-13 models from various manufacturers since it has already been made in the M-hobby magazine, which I wrote about in this posting: 🤗 What else to compare? Technology, designers? Technologies and designers are constantly changing and improving, so it also makes no sense to compare what is now with what will be sometime in the future! 🤗 Really, don't understand, need maked new topic with compared differences models MiG-21F-13 or this topic already somewhere have on the BM? If such a topic is already on BM, then is it possible to just give a link to it in this discussion, so that similar discussions do not arise in this topic, in the future? B.R. Serge Maybe we got a little lost with this topic or I think too much in advance. There is a lot of information in my head and various ideas about comparison arise. If you don't like it, I'll just say goodbye and continue in your style. I apologize. I don’t mention various old and bad models because I think this forum is an exchange of serious information and not some workshop for kids. Ales Link to comment Share on other sites More sharing options...
Recommended Posts