Jump to content

Scratch-built 1/72 Joy JX -1935


Recommended Posts

A build from 10 years ago:

 

I know, I know. So easy to call it names. But look at it from another perspective, more art-like: imagine you see it in the MoMA, MoCA, or SFMoMA.

I don’t know what intentions brothers Ervin and Lyle Joy had, but I know what they achieved: A remarkable, out-of-the-ordinary design, considering that the year was 1935.

Regarding the flying abilities, one could say that it hoped and it hopped. Eventually, a wire fence prevented what could have been a record number of UFO sighting reports.

With five rudders, two engines and what can be considered as a lifting body lodging a no doubt pensive pilot, this apparatus deserves our admiration just for the mere fact of being.

The Joy JX quite precisely falls –in this case the use of the verb depicts more than it intends- in the category of lifting fuselage designs. Usually you have in “normal” planes different parts accomplishing specific functions:  The fuselage lodges the payload, the wings are in charge of the lift and the tail performs the control and gives stability to the whole. In the case of lifting bodies or flying wings, those functions are accomplished blending, eliminating or fusing some of the above-mentioned elements together, thus reducing drag, weight and cost, and hopefully improving the overall efficiency of the system.

The search for information on this one was arduous and rendered just enough to go ahead and concoct a three view.

Since this was bigger than what my Super-Mattel Psychedelic Machine can handle in its little vacuforming plate, two styrene shells were cut and formed, trying to convey the underlying tubular structure of the original. An interior was produced as well as the other, many, flying surfaces –one fin/rudder, one stab/elevator, two auxiliary rudders under the stab, two more following the engines nacelles, one fin under the fuselage and last but no least a small wing between the engines.

Bombs from the spares bin were transformed into more useful engine nacelles (I always like that part). The abundance of struts was dealt with using metal Strutz, and Aeroclub aftermarket Salmsons and wheels. Decals of course were home made.

It wasn’t that difficult: just get a stork, an umbrella, a pancake, two blenders and a fish. Mix everything well and Presto!

I can’t feel but admiration for the boldness, creativity and gills of the remarkable bunch of designers, mechanics and pilots -some times one and the same person- that contributed so much to aviation and, in the process, to general amusement.

A real Joy.

01.jpg

 

02.jpg

 

07.jpg

 

07a.jpg

 

08.jpg

 

09.jpg

 

11.jpg

 

 

12.jpg

 

14.jpg

 

15.jpg

 

16.jpg

 

18.jpg

 

 

 

 

 

  • Like 29
Link to comment
Share on other sites

Beautiful model of a, well, remarkable design.

 

For some reason, I was reminded of Mrs Florence Foster Jenkins' well-published line: "People may say I can't sing, but no one can ever say I didn't sing."

 

Perhaps the Joy brothers' effort could be paraphrased in a similar vein. They certainly deserve a monument, even if it is in 1/72nd scale, for their proven ability to 'think different' (to paraphrase another well known personality).

 

Kind regards,

 

Joachim

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

11 hours ago, Spitfire31 said:

For some reason, I was reminded of Mrs Florence Foster Jenkins' well-published line: "People may say I can't sing, but no one can ever say I didn't sing."

Brilliant!

 

 

11 hours ago, invidia said:

how did the pilot get on board?

They built the plane around the pilot.

 

 

11 hours ago, 06/24 said:

(strange, but beautiful)

One girlfriend I had used to say the same.

 

 

9 hours ago, John R said:

Moa, your models make me believe in a parallel aviation universe.

That's exactly where I live, a little bit to the left of it.

  • Like 1
  • Haha 1
Link to comment
Share on other sites

As others have commented, this is cetainly a bizzare looking machine. They look relatively straightforward to build - except when you show us your photos of the construction - the all the alignment problems become very clear. Wonderful modelling.

 

P

  • Thanks 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...