invidia Posted January 7, 2019 Share Posted January 7, 2019 1/48 tiger moth, getting a few of those, release bulldog and demon, yep a few of them and the lunar module set...Getting that 1 Link to comment Share on other sites More sharing options...
Graham T Posted January 7, 2019 Share Posted January 7, 2019 Bit underwhelmed if I'm honest. LOTS of re-releases - some of which I remember fondly from my childhood which is nice. Re-release of the Sea Vixen is welcome but really wondering why they went for the F4 rather than a full FGA9 with the Hunter (will still buy it though but WHERE is the F6 I've had on offer since the summer?) Apart from that not much for me to get excited about but I'm sure 1/72, armour & maritime modellers will beg to differ & I have no problem with that! Link to comment Share on other sites More sharing options...
dfqweofekwpeweiop4 Posted January 7, 2019 Share Posted January 7, 2019 3 minutes ago, Graham T said: Bit underwhelmed if I'm honest. LOTS of re-releases - some of which I remember fondly from my childhood which is nice. Re-release of the Sea Vixen is welcome but really wondering why they went for the F4 rather than a full FGA9 with the Hunter (will still buy it though but WHERE is the F6 I've had on offer since the summer?) Apart from that not much for me to get excited about but I'm sure 1/72, armour & maritime modellers will beg to differ & I have no problem with that! The 1/48 Hunter F.6 is out now. thanks Mike Link to comment Share on other sites More sharing options...
71chally Posted January 7, 2019 Share Posted January 7, 2019 Loving the re-release of HMS Victorious, especially with that boxart! 1 Link to comment Share on other sites More sharing options...
Trenton guy Posted January 7, 2019 Share Posted January 7, 2019 Whose molds are all those 1/35 armor from? Based on the selection, and willingness to share molds, my money is on Academy. Link to comment Share on other sites More sharing options...
Paul J Posted January 7, 2019 Share Posted January 7, 2019 Quite pleased with a fair few of new and re -releases. Heron; but would have loved a new tooling though, Fiesler Storch , nice I have a decals for a civvy one for it waiting....Definite for the Tiger Moth and a very good price too!!! Not upset this time... makes up for the big Hellcat that doesn't appeal to me. There again I don't do 24th anyway. Link to comment Share on other sites More sharing options...
Biggles81 Posted January 7, 2019 Share Posted January 7, 2019 US Army Tractor? I recall this kit previously https://www.luckymodel.com/scale.aspx?item_no=TND-35001 They also do a range of Hetzers. Link to comment Share on other sites More sharing options...
Meatbox8 Posted January 7, 2019 Share Posted January 7, 2019 2 hours ago, Dave Fleming said: Basically the 'If Only' C10 USAF scheme (again!) There was a conversion set that supplied a new T2 nose and new engines, but it was still a lot of work. Perhaps they'll modify the tool to accommodate an RAF of RN version. Link to comment Share on other sites More sharing options...
Meatbox8 Posted January 7, 2019 Share Posted January 7, 2019 3 hours ago, AMB said: How many Buccaneer kits do we need? Surely there are enough decent kits around for any serious modeller to make a good job of?? Is this joining the never-ending release of Spitfire and F-16 kits...and at £24.99!!! Not sure there are any decent kits of the Buccaneer out there, other than the CMR kit at over £60. This was in my top five 'wants' so I'm not complaining (well, apart from that there is no new tool 1/72 Mosquito with two stage Merlin kit). Link to comment Share on other sites More sharing options...
Meatbox8 Posted January 7, 2019 Share Posted January 7, 2019 1 hour ago, 71chally said: Loving the re-release of HMS Victorious, especially with that boxart! Not that I build ships but I would be very tempted by that one. I could photoshop it in to the background of my new Buccaneer kit 'in flight'. The buccaneer that is, not the ship. 1 Link to comment Share on other sites More sharing options...
Eric Mc Posted January 7, 2019 Share Posted January 7, 2019 3 hours ago, Charlie Hugo said: To be pedantic (or pain in the a) there are 4, two from Airfix (S1 and S2) Frog and Matchbox To be even more pedantic, the original Airfix kit was closer to the NA39 prototypes than an S1. Link to comment Share on other sites More sharing options...
VMA131Marine Posted January 7, 2019 Share Posted January 7, 2019 27 minutes ago, Meatbox8 said: Perhaps they'll modify the tool to accommodate an RAF of RN version. It's being released in the Vintage Classics line so don't get your hopes up. Your best bet if you want to model a Jetstream that actually saw service is the AModel kit. Link to comment Share on other sites More sharing options...
Meatbox8 Posted January 7, 2019 Share Posted January 7, 2019 7 minutes ago, VMA131Marine said: It's being released in the Vintage Classics line so don't get your hopes up. Your best bet if you want to model a Jetstream that actually saw service is the AModel kit. Mmm. You're probably right. Pity really. However, I have the kit from the Airfix club members release and managed to source the M&E Models conversion set, all waiting patiently in the stash. I wonder how the Airfix kit will sell, given that it is of a mark that never went in to service. Link to comment Share on other sites More sharing options...
Paul821 Posted January 7, 2019 Share Posted January 7, 2019 9 minutes ago, Eric Mc said: To be even more pedantic, the original Airfix kit was closer to the NA39 prototypes than an S1. Not a pendant by any means. First issued in 1960 Airfix always boxed it as a NA39 until a rebox in 1979. Source scalemates Link to comment Share on other sites More sharing options...
Wez Posted January 7, 2019 Share Posted January 7, 2019 (edited) 3 hours ago, Basuroy said: In an age where Eduard can deliver near scale accurate rivets I haven't had a good look at Eduard's 1/48th Tempest yet which I believe has some raised rivets but if you mean the holes they put in the skin that need plugging with rivets? Measure the depth of those divots and then scale them up, don't be surprised if they're deeper than the thickness of the skin gauge on the real aircraft. You might think they look like rivets but to any aeronautical engineer they look like pulled or overstressed skin. Please don't tell me they're accurate because they're not Edited January 7, 2019 by Wez 4 Link to comment Share on other sites More sharing options...
Nocoolname Posted January 7, 2019 Share Posted January 7, 2019 3 hours ago, AMB said: How many Buccaneer kits do we need? Surely there are enough decent kits around for any serious modeller to make a good job of?? Is this joining the never-ending release of Spitfire and F-16 kits...and at £24.99!!! Ideally as many as the F-14 kits that have been released recently, of the same level of quality and in multiple scales if possible. Then I’ll be satisfied. Otherwise there’s nowt from Airfix that really floats my boat this year. 1 Link to comment Share on other sites More sharing options...
Nocoolname Posted January 7, 2019 Share Posted January 7, 2019 5 minutes ago, Wez said: I haven't had a good look at Eduard's 1/48th Tempest yet which I believe has some raised rivets but if you mean the holes they put in the skin that need plugging with rivets? Measure the depth of those divots and then scale them up, don't be surprised if they're deeper than the thickness of the skin gauge on the real aircraft. You might think they look like rivets but to any aeronautical engineer they look like pulled or overstressed skin. Please don't tell me they're accurate because they're not I’ve done just that. In fact I just couldn’t sleep until I’d checked each and every one and lo, they are a number of microns out. Then again, the thickness of the plastic itself is ‘way’ off (it would be like battleship armour to a plane!) while the ‘stressed’ look just isn’t there and the panel lines are way too symmetric. I’m glad I checked and saved the money 🤪 2 Link to comment Share on other sites More sharing options...
Phas3e Posted January 7, 2019 Share Posted January 7, 2019 The new scheme on the 1:72 Typhoon looks nice, and what looks like a Jg5 scheme for the 190A-8. LouIV...again, wonder what the other scheme is. Great news about the MiG 17, I will be grabbing that for sure. The 1/35 Armour I wouldn't expect in a million years, though I'm not sure the pricing will make much difference over Academys (here in NZ anyway) Overall I think its a pretty good list. Link to comment Share on other sites More sharing options...
Max Headroom Posted January 7, 2019 Share Posted January 7, 2019 The Heron is back. Should I? Trevor 2 Link to comment Share on other sites More sharing options...
Nocoolname Posted January 7, 2019 Share Posted January 7, 2019 11 minutes ago, Max Headroom said: The Heron is back. Should I? Trevor What, one of these? https://en.m.wikipedia.org/wiki/Heron Go for it! Link to comment Share on other sites More sharing options...
Work In Progress Posted January 7, 2019 Share Posted January 7, 2019 11 minutes ago, Max Headroom said: The Heron is back. Should I? Trevor It's not the most accurate thing, nor the most modern, but it's the only game in town and will go nicely with the A-Model Dove / Devon Link to comment Share on other sites More sharing options...
Meatbox8 Posted January 7, 2019 Share Posted January 7, 2019 Glad to see the return of the Bulldog. A nice little kit of which I could do with a new rendition, having built it (un-rigged) about 25 years ago. Hopefully it will be released with those nice 19 Sqn bars as my edition had the rather colourless 17 sqn markings. Still, more interesting than the scheme on 17's current mount! As for the Demon though, that is a veeeeeery old tool so think I'll give it a miss. Link to comment Share on other sites More sharing options...
Giorgio N Posted January 7, 2019 Share Posted January 7, 2019 2 hours ago, DannyB said: Reissue F-15A, F-16A and F/A-18A from Airfix? A55311 - F-15A A55312 - F-16A A55313 - F/A-18A Pretty well priced too, could be good for the returns as long as the tooling can hold up against the much stronger/newer toolings out there. I quite liked the F-15, raised panel lines but very delicate, looked fine shapewise and detail was pretty good for the time. Today it's sure not up there with the best but at a low price could still be of interest. Main competitor would be the Academy kit, that is also cheap at least in the standard boxing. The F-16 and the F-18 going by memory were not as nice, the decal schemes proposed for the Hornet though are quite interesting, with a potential problem... the coiver scheme is something for which I've seen no photographic evidence. I hope that Airfix have and the scheme is real, as the only reference I've seen is an Aeromaster sheet. 1 Link to comment Share on other sites More sharing options...
Max Headroom Posted January 7, 2019 Share Posted January 7, 2019 7 minutes ago, Nocoolname said: What, one of these? https://en.m.wikipedia.org/wiki/Heron Go for it! No. This one http://montypython.wikia.com/wiki/The_Spanish_Inquisition Trevor Link to comment Share on other sites More sharing options...
Nocoolname Posted January 7, 2019 Share Posted January 7, 2019 2 minutes ago, Max Headroom said: No. This one https://goo.gl/images/GWg4sx Trevor Err... I see you have added ‘scope’ to the definition of ‘Heron’. Link to comment Share on other sites More sharing options...
Recommended Posts