keith in the uk Posted January 13, 2019 Share Posted January 13, 2019 Looking good so far , Just a pointer , wheel bays should be finished in Natural metal not Interior green. 1 Link to comment Share on other sites More sharing options...
Troy Smith Posted January 13, 2019 Share Posted January 13, 2019 (edited) On 26/12/2018 at 13:35, Troy Smith said: Note, this shot of KZ295 by this stage interiors parts are all Grey-green, and that the inside of the gear doors and what is visible of the wheel well are the underside colour. 30 minutes ago, keith in the uk said: Looking good so far , Just a pointer , wheel bays should be finished in Natural metal not Interior green. They were Aluminium paint, not natural metal, up to a point (sometime in 1942 it seems) , and then as the photo above shows, the underside colour, as can just be seen. There are B/w shots where it can be seen they UC wels are the same tone as the underside as well HTH PS HW189 still had aluminuim painted wells/gear legs see here https://www.britmodeller.com/forums/index.php?/topic/235049405-hurricane-footage-on-youtube-desert-scheme-repaints-in-colour Edited January 13, 2019 by Troy Smith add pic 1 Link to comment Share on other sites More sharing options...
Kallisti Posted January 13, 2019 Author Share Posted January 13, 2019 (edited) The wheel wells WERE interior green until I forgot to mask them when spraying the primer, and I was intending to repaint in Aluminium once the rest of the painting is done, however the photos above from Troy make me think that I should continue with the Azure blue - at the very least on the inside of the gear doors (which are still currently interior green ) Thanks for the feedback, always good to get useful information! I've just finished masking the underside ready to start on the camo upper surfaces... dark earth first, after lunch now... Edited January 13, 2019 by Kallisti Link to comment Share on other sites More sharing options...
Kallisti Posted January 13, 2019 Author Share Posted January 13, 2019 Just noticed an error in the kit - the port wing still has a cut out for the landing lights which were blocked off on the IId. Having to take off some of the masking and fill the hole in The kit instructions imply that there should be both lights but the starboard wing has the hole closed but the port wing still has it open. Link to comment Share on other sites More sharing options...
Kallisti Posted January 21, 2019 Author Share Posted January 21, 2019 Not a huge amount of progress in the last week or so as I've come down with a cold and been feeling grotty to say the least. I have made some progress however, namely fixing the gap in the port wing and finishing off the top surfaces camo This is after its been given a Klear coat ready for decals. More later in the week when I'm back to what is laughably called "normal"... Link to comment Share on other sites More sharing options...
Kallisti Posted February 3, 2019 Author Share Posted February 3, 2019 A couple of weeks have gone by and I can announce that finally it is complete. To be honest I got a bit fed up with it towards the end so was really glad to get it over the finish line! I've been having issues for a while with the varnishing stage of my builds so for this one I was being VERY careful not to mess it all up at the last stage! I scratch built some wooden chocksout of some scrap balsa and wire for the handles and finally assembled all the extra bits on the base. So without further ado here are the photos: The tool box is of course non-regulation for WWII RAF, its actually modelled on the toolbox my Dad had when I was a kid One of the last things I did is add a pouch for the First Aid Kit on the back of the port fuselage panel - there are markings on the outside highlighting its location. These last shots are trying to capture some of the cockpit detail - tricky with the lighting... There it is - another of the builds I've been wanting to do for a couple of years since the Fly kits started appearing. This fits well in the sequence between the Spitfire IX in Tunisia diorama from mid 1943 (You can see that build here:) and the "Clang" diorama which would have been in mid 1944 (which you can see here:) My next build will be something rather different... 2 Link to comment Share on other sites More sharing options...
clive_t Posted February 3, 2019 Share Posted February 3, 2019 Wonderful work! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now