Serkan Sen Posted March 14, 2019 Author Share Posted March 14, 2019 (edited) On 3/14/2019 at 10:13 AM, Neffan said: Nice work, but I think the Nose of the T-10M is a little more pointed ...What do you think ? Thanks Neffan. Regarding to nose here is the reference picture I have used to shape the cone: It seems to me that the nose cone is in correct shape, isn't it? 🤔 Serkan Edited March 29, 2019 by Serkan Sen 5 Link to comment Share on other sites More sharing options...
Neffan Posted March 15, 2019 Share Posted March 15, 2019 Yes, now with these 2 views, it's clearer ...👍 Thank you 1 Link to comment Share on other sites More sharing options...
Neffan Posted March 27, 2019 Share Posted March 27, 2019 (edited) 1 minute ago, Neffan said: I d'ont understand why we cannot find an accurate SU-35/37 (T-10M) 1/72 on the market ...? This aircraft is verry nice ... Edited March 27, 2019 by Neffan Link to comment Share on other sites More sharing options...
Neffan Posted April 9, 2019 Share Posted April 9, 2019 Any news about T-10M ? Link to comment Share on other sites More sharing options...
Serkan Sen Posted April 28, 2019 Author Share Posted April 28, 2019 I have made some progress in my project. All three aircrafts have been assembled and now ready to fill the joints with putty before applying primer coat (left to right M9, M11 and M1): I use Oramask foil to mask filler area: And after applying putty and removing masks: The next step will be coating all the parts with primer... Serkan 7 Link to comment Share on other sites More sharing options...
Neffan Posted April 29, 2019 Share Posted April 29, 2019 23 hours ago, Serkan Sen said: I have made some progress in my project. All three aircrafts have been assembled and now ready to fill the joints with putty before applying primer coat (left to right M9, M11 and M1): I use Oramask foil to mask filler area: And after applying putty and removing masks: The next step will be coating all the parts with primer... Serkan Super ! Looking forward the last step ... 1 Link to comment Share on other sites More sharing options...
Nikolay Polyakov Posted May 10, 2019 Share Posted May 10, 2019 On 07/03/2019 at 13:31, Serkan Sen said: I love all planes as I am aeronautical engineer 🙂 Now we’re understand what’s going on here! 🙂 Great engineering, @Serkan Sen! 2 1 Link to comment Share on other sites More sharing options...
su27rules Posted April 21, 2020 Share Posted April 21, 2020 Fantastic work and ideas. 1 1 Link to comment Share on other sites More sharing options...
Serkan Sen Posted January 26, 2021 Author Share Posted January 26, 2021 (edited) I had nothing to report since long time after having a bleeding/sweating resin disaster on my both Flankerstein and T-10M projects. I have replaced all resin parts in my Flankerstein project and almost completed that build. The only missing part is the payload that can be added later. Here are some pictures of my hopeless recovery attempts from sweating resin problem. All kits were placed in oven and the temperature was set to 60°C for 4 hours: ous After 4 hours baking in the oven what I got was the distorted wings and air intakes: But this disaster did not stop me (but maybe a bit slowed me down 🙂 ). As I did in Flankerstein build I have rescued the kit parts as much as possible and started to rebuild: From now on I will launch dedicated topics for each T-10M builds: T-10M3 (703): The other builds will follow... Serkan Edited January 26, 2021 by Serkan Sen 3 1 3 Link to comment Share on other sites More sharing options...
Zorglub Posted January 29, 2021 Share Posted January 29, 2021 Hang in there The reaction of the resin is strange. I hope your solutions will overcome these problems. In 2017 I had started a transformation (on stand-by for the moment) of a Zvezda kit to make a T10M ( 703 ), but with the only zvezda kit, and I had to find different solutions. But your subject teaches me a lot, really, it's a mine of information and tricks. Thank you very much. I haven't expressed myself on your subject yet, I'm still a bit new, but I'm very assiduously following this transformation. Hang in there, I'm sure you'll make it, and these T10Ms, I think they're really beautiful, it's worth building them. Translated with www.DeepL.com/Translator (free version) 1 1 Link to comment Share on other sites More sharing options...
Serkan Sen Posted January 29, 2021 Author Share Posted January 29, 2021 10 hours ago, Zorglub said: I hope your solutions will overcome these problems. Yes I have fixed all the problems especially caused by aged resin. 10 hours ago, Zorglub said: But your subject teaches me a lot, really, it's a mine of information and tricks. I have also learned a lot during this project and improved my manufacturing skills. Now I can build the T-10M family easily as I have all parts in my stock. Serkan 3 Link to comment Share on other sites More sharing options...
Sgt.Squarehead Posted January 31, 2021 Share Posted January 31, 2021 Gutted about that resin! However it seems clear a 'little' thing like that ain't going to stop you.....Kudos! 2 Link to comment Share on other sites More sharing options...
Serkan Sen Posted January 31, 2021 Author Share Posted January 31, 2021 9 hours ago, Sgt.Squarehead said: Gutted about that resin! However it seems clear a 'little' thing like that ain't going to stop you.....Kudos! No pain no gain!.. It was my fault to use old resin without checking its shelf life end date... I learned in hard (painful) way not to use aged resin for casting. Serkan 4 Link to comment Share on other sites More sharing options...
Nikolay Polyakov Posted March 19, 2021 Share Posted March 19, 2021 On 26/01/2021 at 12:36, Serkan Sen said: After 4 hours baking in the oven what I got was the distorted wings and air intakes: It looks like you’re forgot to add the cinnamon... 😬 On 26/01/2021 at 12:36, Serkan Sen said: But this disaster did not stop me (but maybe a bit slowed me down 🙂 ). Your nerves are made of steel, Serkan! On 31/01/2021 at 15:18, Serkan Sen said: It was my fault to use old resin without checking its shelf life end date... I learned in hard (painful) way not to use aged resin for casting. Any chance to find our kits (with some resin parts) distorted after many years? 2 1 Link to comment Share on other sites More sharing options...
Serkan Sen Posted March 20, 2021 Author Share Posted March 20, 2021 13 hours ago, Nikolay Polyakov said: Your nerves are made of steel, Serkan! Or maybe I have no nerves at all therefore I feel no pain... 4 1 Link to comment Share on other sites More sharing options...
Serkan Sen Posted October 13, 2021 Author Share Posted October 13, 2021 Here I started a new topic for T-10M1 build: Serkan 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now