Brandy Posted July 3, 2019 Share Posted July 3, 2019 Morning Martian! Sleep well? 4 Link to comment Share on other sites More sharing options...
Brandy Posted July 3, 2019 Share Posted July 3, 2019 (edited) Duplicate Edited July 3, 2019 by limeypilot 1 Link to comment Share on other sites More sharing options...
perdu Posted July 3, 2019 Author Share Posted July 3, 2019 How YOU can sleep... 2 Link to comment Share on other sites More sharing options...
The Spadgent Posted July 3, 2019 Share Posted July 3, 2019 Nice one Mr Sheen! 💍 Link to comment Share on other sites More sharing options...
perdu Posted July 4, 2019 Author Share Posted July 4, 2019 Small morning update, no building info attached Telford accommodation booked, yeehah. 👍 3 Link to comment Share on other sites More sharing options...
Terry1954 Posted July 4, 2019 Share Posted July 4, 2019 1 hour ago, perdu said: Telford accommodation booked, yeehah. Booked mine a while back, see you there!!! 1 Link to comment Share on other sites More sharing options...
Brandy Posted July 4, 2019 Share Posted July 4, 2019 Likewise! Surprised you found anywhere with vacancies this close to the date. Ian 1 Link to comment Share on other sites More sharing options...
perdu Posted July 4, 2019 Author Share Posted July 4, 2019 I found a single room (£38) about a five minute drive away, last room in the place luckily Taxis are available so dinner is on if Ced can, yes let us allow Ced to find a pub Always let an organiser organise 3 Link to comment Share on other sites More sharing options...
hendie Posted July 4, 2019 Share Posted July 4, 2019 Bill, since you included it in the title, I just had to link it here.... 2 Link to comment Share on other sites More sharing options...
CedB Posted July 5, 2019 Share Posted July 5, 2019 On 04/07/2019 at 16:15, perdu said: Taxis are available so dinner is on if Ced can, yes let us allow Ced to find a pub Gah! In Telford? I'm not even a local, let alone a regular attender… I shall ponder… Link to comment Share on other sites More sharing options...
Brandy Posted July 6, 2019 Share Posted July 6, 2019 How about this one, just outside Telford? https://www.yelp.co.uk/biz/the-seven-stars-shifnal It looks like it's only 7 miles so a cab should be reasonable! Ian 1 Link to comment Share on other sites More sharing options...
CedB Posted July 6, 2019 Share Posted July 6, 2019 Thanks Ian, looks like a nice place, if a bit far. Purely selfishly, I'm staying at the Park House Hotel with @06/24 and our three American Friends so maybe we should meet there? If there's a big party we can probably arrange a separate room, dancing girls etc etc… 1 4 Link to comment Share on other sites More sharing options...
Fritag Posted July 6, 2019 Share Posted July 6, 2019 On 7/2/2019 at 2:24 PM, perdu said: And then pull moulding will give me some plastic shapes Can you pull - mould over the plastic master without the master getting deformed by the heat Bill? Can’t use a plastic master with a dental vac machine cos the PETG gets too hot and/or the vacuum holds the hot PETG too tightly/long against the master and deforms it. Hence all the faffing with resin or plaster or milliput masters..... 1 Link to comment Share on other sites More sharing options...
perdu Posted July 6, 2019 Author Share Posted July 6, 2019 3 hours ago, limeypilot said: How about this one, just outside Telford? https://www.yelp.co.uk/biz/the-seven-stars-shifnal It looks like it's only 7 miles so a cab should be reasonable! Ian 2 minutes ago, Fritag said: Can you pull - mould over the plastic master without the master getting deformed by the heat Bill? Can’t use a plastic master with a dental vac machine cos the PETG gets too hot and/or the vacuum holds the hot PETG too tightly/long against the master and deforms it. Hence all the faffing with resin or plaster or milliput masters..... Steve with pull moulding you get to decide how much pressure is required for how long, a few mouldings can be done before the donor dies, especially as I prefer thin acetate to PETg these days Ian as long as we don't go to Tong, to the Bell which has dropped down the OK pubs to eat at list I keep in my head If Ced wants to lure us in with the wicked wiles of dancing girls in private salons who am I to demur? 🍻 1 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted July 6, 2019 Share Posted July 6, 2019 7 minutes ago, perdu said: Ian as long as we don't go to Tong, to the Bell which has dropped down the OK pubs to eat at list I keep in my head If Ced wants to lure us in with the wicked wiles of dancing girls in private salons who am I to demur? I'm staying in the hotel right next to the Telford Centre, with one or two others. There is a bar there and quite a few food choices within walking distance, so anyone and everyone is welcome to gather at that bar! Terry 2 Link to comment Share on other sites More sharing options...
Brandy Posted July 6, 2019 Share Posted July 6, 2019 I'm in the Park Inn, in Telford. There looks to be a pretty good real ale pub not far so I'll definitely be checking that one out. But an evening out of the area would be fun. There's also a real ale pub in Shifnall. where Ced will be - the Plough is a previous CAMRA town pub of the year winner! Meeting up at your hotel would work Ced, but if we're all at the International centre we can always fine tune the planning at some stage during the day! Ian 2 Link to comment Share on other sites More sharing options...
Courageous Posted July 6, 2019 Share Posted July 6, 2019 (edited) 5 hours ago, Fritag said: Can’t use a plastic master with a dental vac machine cos the PETG gets too hot and/or the vacuum holds the hot PETG too tightly/long against the master and deforms it. Hence all the faffing with resin or plaster or milliput masters..... Au contraire mon ami, on my Seafox build I packed the kit glazing with milliput, sanded the frames and used that as the master. I then used the master a second time for the second Seafox and the master is still as it was in the beginning...worked for me anyway. Oh, seeing that we're talking of Telford, can anybody point me to the BM badge template? Stuart Edited July 6, 2019 by Courageous 2 1 Link to comment Share on other sites More sharing options...
perdu Posted July 6, 2019 Author Share Posted July 6, 2019 Good to see some proper research going on here I will flow with the go 1 Link to comment Share on other sites More sharing options...
Terry1954 Posted July 6, 2019 Share Posted July 6, 2019 4 hours ago, limeypilot said: but if we're all at the International centre we can always fine tune the planning at some stage during the day! There is a good logical mind in action! A plan is forming, and remember a good plan is always a basis for fine tuning and change! 2 hours ago, Courageous said: Oh, seeing that we're talking of Telford, can anybody point me to the BM badge template? I'd recognise you anywhere Stuart .................... but if you want to be famous........ Terry 1 Link to comment Share on other sites More sharing options...
Ex-FAAWAFU Posted July 6, 2019 Share Posted July 6, 2019 (edited) I’m starting to feel rather inadequate, because I am only going to Telford for - gasp - one day... No dancing girls for Crisp, no siree Edited July 6, 2019 by Ex-FAAWAFU 1 3 3 Link to comment Share on other sites More sharing options...
Brandy Posted July 6, 2019 Share Posted July 6, 2019 Hope to see you there Crisp! Looks as though it's going to be busy! Ian Link to comment Share on other sites More sharing options...
Fritag Posted July 11, 2019 Share Posted July 11, 2019 On 7/6/2019 at 10:34 AM, perdu said: Steve with pull moulding you get to decide how much pressure is required for how long, a few mouldings can be done before the donor dies, especially as I prefer thin acetate to PETg these days Ah Yes. You remind me. That's wot I did way back with my chippie canopy. Very possibly because that's wot you told me to do..... On 7/6/2019 at 3:36 PM, Courageous said: Au contraire mon ami, on my Seafox build I packed the kit glazing with milliput, sanded the frames and used that as the master. I then used the master a second time for the second Seafox and the master is still as it was in the beginning...worked for me anyway. Yes. And it would probably work for me too. If I'd remembered that I'd done the same (filled the kit glazing with milliput that is) with my chippie build Bit late now......... 2 Link to comment Share on other sites More sharing options...
perdu Posted July 11, 2019 Author Share Posted July 11, 2019 21 minutes ago, Fritag said: Ah Yes. You remind me. That's wot I did way back with my chippie canopy. Very possibly because that's wot you told me to do..... Yes. And it would probably work for me too. If I'd remembered that I'd done the same (filled the kit glazing with milliput that is) with my chippie build Bit late now......... Never fear, this is only short term embarrassment and all will be well once you are back here swinging with us again You will never know you went away... 1 Link to comment Share on other sites More sharing options...
corsaircorp Posted July 11, 2019 Share Posted July 11, 2019 On 7/6/2019 at 7:23 PM, Ex-FAAWAFU said: I’m starting to feel rather inadequate, because I am only going to Telford for - gasp - one day... No dancing girls for Crisp, no siree But maybe a few minute for sharing a rocket fuel bottle with FAA enthusiast ?? CC 1 1 Link to comment Share on other sites More sharing options...
Ex-FAAWAFU Posted July 11, 2019 Share Posted July 11, 2019 6 minutes ago, corsaircorp said: But maybe a few minute for sharing a rocket fuel bottle with FAA enthusiast ?? CC Avec plaisir 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now