Jump to content
This site uses cookies! Learn More

This site uses cookies!

You can find a list of those cookies here: mysite.com/cookies

By continuing to use this site, you agree to allow us to store cookies on your computer. :)

GMK

Plamax 1/20 VF-1 Valkyrie Gerwalk

Recommended Posts

Picked up the Plamax 1/20 VF-1 Valkyrie - the star of the anime classic Super Dinensional Fortress Macross (more widely known in the west by another name, use of which is considered bad form by purists) - billed as the largest Macross model kit ever. Though intended to be built as either a Super or Strike variant from the movie, I’m likely to build as a conventional ‘cannon fodder’ VF-1A. 

 

The parts (that’s a full-size bottle of beer tucked away in the bottom right to give a hint of the size):

 

1JOjR7R.jpg

 

and the intended finish:

 

eaWAXai.jpg

 

I’m also considering a technique known as ‘cel shading’, in which a model is painted to look like an coloured anime cel, complete with artificial shadows & highlights. The best I’ve seen is this 1/72 scale model:

 

ViDbfBp.jpg

 

Difficult to believe that’s a three dimensional model!

Share this post


Link to post
Share on other sites

Thank you @Hunter Rose & @JamesP

 

Like a lot of renditions of sci-fi/anime subjects from Japanese producers, this kit comes molded in various colours of styrene. 

 

BcpjdXK.jpg

 

Couldn’t resist trying the new (& very expensive!) Meng side cutters...

 

05CMOz0.jpg

 

Duly impressed with the cutting ability of the Meng cutters! Then the parts were press-fitted them together..

 

LNhLSw9.jpg

 

Looks like the classic Valkyrie nose!

Share this post


Link to post
Share on other sites

Ooh, you were quick off the mark with this one! It looks look a cool kit, especially with a one piece nose :)

 

Cheers,

 

Will

Share this post


Link to post
Share on other sites

Huge! Will you need planning permission from the council?

Share this post


Link to post
Share on other sites

@Pete in Lincs I hope not - I already build at the pace of a startled glacier!

 

Dry fitting & cleaning up sink holes in some of the not-so-little parts....

 

Forward fuselage:

 

5JUUdST.jpg

 

Press fit with the nose.

 

HdAMKkP.jpg

 

Like a lot of anime, with giant robots piloted by angst-ridden teens being the solution to most problems, this kit has a head (the ‘A’ head seen here) - stowed in this mode.

 

z3KbDGl.jpg

 

The head would look like this in ‘Battroid’ (i.e. giant robot) mode:

 

GdKRA1U.jpg

 

 

In a broader context, under the fuselage, between the intakes.

 

JQadHlU.jpg

 

The kit also comes with the ‘J’ head (right), and the ever-popular ‘S’ head (left). 

 

jaZSgyV.jpg

 

As I’m building the ‘cannon fodder’ VF-1A, these heads are surplus to requirements. 

 

Thanks for looking. 

Share this post


Link to post
Share on other sites

Wow very impressive you win the lottery then. Just for folks who don't realise how big this bad boy is.

 

macross.png

 

 

Share this post


Link to post
Share on other sites

Thanks @Pilgrim_UK for adding context. The box is enormous!

 

fADXHKz.jpg 

 

Pulled the cockpit off the sprues/runners to see what’s what. 

 

ruzr25I.jpg

 

I’ll likely modify the kit cockpit from the movie-style (DYRL?) cockpit back to the TV-style (SDFM), but I’m not 100% on that yet. 

 

This is the movie type:

 

XCB24bL.jpg

This is the TV-style:

 

7j84xBZ.jpg 

 

Then added it to the nose section. 

 

Y9VSYFU.jpg

 

Pretty happy so far. It’s big, detailed, & easy - the challenge will be the painting. 

 

ETA: hmm, pics are a little too high contrast will improve in later posts. 

Share this post


Link to post
Share on other sites

With sprues/runners being about 10mm in diameter, cleanup of this behemoth is somewhat time consuming. I’ve also being filling sink holes & experimenting with some of the panel lines to confirm what they’ll look like, as the white plastic makes details difficult to see. 

 

eBMZThu.jpg

 

Most of what you see here is press fit together, so that I can understand what molded in defects I can safely ignore & what must be filled. 

Share this post


Link to post
Share on other sites

Man, that's a big beast to tackle! Like the idea of backdating the cockpit, and at that size it should make the job easier. And a cell-shading paint job would be spectacular!

Edited by Thom216

Share this post


Link to post
Share on other sites

There’s been some discussion regarding how true-to-anime the backpack of this kit it. In-universe, the backpack is what is formed by the vertical stabilisers folding, before the eppenage itself folds. 

 

Using the proportions of the Hasegawa 1/72 kit as a guide, I mocked up the following (left):

 

ocWb3zG.jpg

 

It’s not correct (yet) but the lengths & height work. 

 

Kit:

 

ndof9x8.jpg

 

Mock up:

 

GDmC4JC.jpg

 

Anime:

 

nAWCa7K.jpg 

 

Not there yet, but a lot closer. 

Share this post


Link to post
Share on other sites

Work continues in the backpack. I’ve cut off the forward ‘diving board’ and temporarily removed the ECM bulges to work on the ejector pin marks, which are (inconveniently) on the upper surface. Also took the opportunity to narrow the end by 4mm, thereby making the taper more anime-accurate. 

 

GyIFfqB.jpg

 

The ejector pins on the folded vertical stabilisers were addressed next. 

 

rQ0rErn.jpg

 

I’ve also started on the backpack in styrene, commencing with a 6mm thick hardback that will anchor the remaining structure. 

 

Thanks for looking. 

Share this post


Link to post
Share on other sites
3 minutes ago, Thom216 said:

Boy, someone loves their ejector pin marks!

And they’re not shy about them! Smallest I’ve found is 6mm across. These are ~10mm. 

Share this post


Link to post
Share on other sites

More work on the (potential) replacement backpack. Kit on the left, WIP on the right. 

 

32oCpiM.jpg

 

Lots still to do.

 

IO7TVlg.jpg

 

Tested both on the fuselage/nose assembly. Kit:

 

g6qyGCc.jpg

 

Anime:

 

HxvQje6.jpg

 

Not yet in a position to make a call, so I’ll continue on the potential replacement. 

Share this post


Link to post
Share on other sites

Train smashed some pics together to compare the pieces...

 

3lNtBwx.jpg

 

As I see it, the back half of my version (top) is closer to the anime (middle), than the kit. That said, the opening of the kit piece is closer in height. Some thinking to do. 

Share this post


Link to post
Share on other sites

Built a new backpack that’s 10% smaller overall - not there yet, but definitely an improvement over the first version. Also took the opportunity to add the legs, just to get a better view overall. 

 

PAflGgx.jpg

 

Compared to the kit backpack. 

 

SvlZWOH.jpg

 

This kit isn’t getting any smaller!

Share this post


Link to post
Share on other sites

Merry Christmas, all!

 

Used Boxing Day to make some progress...

 

Firstly, I needed to build the small ‘dome’ on the backpack. After some attempts using a ping pong ball, some epoxy putty, and a disc of styrene, I got there (bottom, left). 

 

6L0f2PN.jpg

 

I lined the three candidates up (kit, version 1, version 2) to see what was what. 

 

NP8nRTM.jpg

 

I think making v.2 was a good idea (dome dry fit).

 

LFgcyXs.jpg

 

With intake grill added...

 

PoyqR49.jpg

 

Almost done on this freaken backpack!

Share this post


Link to post
Share on other sites

Getting closer to paint - and gathering ‘references’ for colours. So, on to YouTube to watch Super Dimensional Fortress Macross to screencap as many Brownie/Cannon Fodder VF-1A:

 

CGd3myT.jpg

 

19ioZRF.jpg

 

UjpwrMh.jpg

 

2Vc1bVe.jpg

 

Plus some colour tips for the CF pilot:

 

OlOyijY.jpg

 

 

Share this post


Link to post
Share on other sites

Have made some more progress over the last few weeks, including paint tests using SMS paints. I’ve settled on Pilbara for the tan & CARC Brown for the hinges & ‘feet’. 

 

9UodPF3.jpg

 

Very happy with proportions of the scratchbuilt backpack. 

 

H25h4yW.jpg

 

Still lots of work to go. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...