Homebee Posted November 20, 2018 Share Posted November 20, 2018 (edited) Special Hobby is to re-release the MPM 1/72nd Douglas Boston Mk.III Intruder kit - ref. 72398 Source: http://www.specialhobby.info/2018/11/sh72398-boston-mkiii-intruder-boxart.html Box art V.P. Edited September 13, 2019 by Homebee 3 Link to comment Share on other sites More sharing options...
Truro Model Builder Posted November 20, 2018 Share Posted November 20, 2018 Nice art. How good/easy is the MPM Boston? Link to comment Share on other sites More sharing options...
Giorgio N Posted November 20, 2018 Share Posted November 20, 2018 1 hour ago, Truro Model Builder said: Nice art. How good/easy is the MPM Boston? I'm building the A-20G variant in the Pacific at War GB, it's not the easiest of builds as the fit of several parts require a lot of fettling to get it right. At the same time it's a nice kit, looks good in terms of shapes, it's not extremely detailed but what's there is good and can be a nice canvas to add even more detail. Overall I'd rate this as the best Boston available in this scale but it's not for those who only accept tamigawa style engineering and fit. Personally I like it quite a lot 4 1 Link to comment Share on other sites More sharing options...
Trenton guy Posted November 20, 2018 Share Posted November 20, 2018 Looks as good as a Hasegawa kit in the box but not an easy fit. Biggest problems were that the nose glazing was wider than the corresponding fuselage front and the wing roots were not as deep as the wing root fairing on the fuselage pieces. Both easily resolved with a little careful shimming if you know about it before you have the fuselage and the wings firmly assembled. Guess who didn’t. Sorted in the end but I had to resort to sanding down the sides of the nose glazing, polishing it back to clarity and re-scribing the framing. Not for the faint hearted but the glazing was thick enough to permit it. Fixed the wing root problem by matching the top and creating a putty fairing on the bottom. Just don’t turn it over. Seems like fuselage/glazing mismatch is a common issue with MPM/Special Hobby kits, especially older ones. Always a good idea to check before committing to glue. 4 1 Link to comment Share on other sites More sharing options...
dalea Posted November 25, 2018 Share Posted November 25, 2018 Checked my Ducimus reference for the MSG/DG over Smooth Night finish and found the following ( edited) " Some of the Boston III (Intruders)… and night fighters were reported as being re-painted in the new scheme but, unfortunately, no photographs exist which could provide confirmation of this. Squadron records are equally bare..." I realize that those words would have been written nigh on 50 years ago now but I would appreciate it if anybody can provide photographic confirmation of the above scheme. What are the other schemes for this latest boxing? Link to comment Share on other sites More sharing options...
Homebee Posted March 26, 2019 Author Share Posted March 26, 2019 (edited) Released - SH72398 - Douglas Boston Mk.III Intruder - https://www.specialhobby.eu/en/our-own-production/special-hobby/boston-mk-iii-intruder.html Schemes & decals Source: http://www.specialhobby.net/2019/03/sh72398-boston-mkiii-intruder-kamuflaze.html V.P. Edited July 16, 2019 by Homebee 1 Link to comment Share on other sites More sharing options...
MigModeller Posted April 3, 2019 Share Posted April 3, 2019 As a fan of this type, I had hoped to read that it is an easy assembly. Annoyed that it's not The Airfix had misshapen front engine cowlings. Another source of annoyance. Hope to do an 88 Sqn D-Day machine Link to comment Share on other sites More sharing options...
Albeback52 Posted April 5, 2019 Share Posted April 5, 2019 Was it not the MPM kit(s) that were repackaged by Revell as the Boston III & Boston V? I had the latter, Definitely not an easy build but, with care and patience it turned out fine! Allan Link to comment Share on other sites More sharing options...
JWM Posted April 5, 2019 Share Posted April 5, 2019 21 minutes ago, Albeback52 said: Was it not the MPM kit(s) that were repackaged by Revell as the Boston III & Boston V? I had the latter, Definitely not an easy build but, with care and patience it turned out fine! Allan Exactly, and the Revell kit had all MPM variants plastic included, so not only that which was nominally in the box (I mean those supported by decals ). I have couple of MPM Boston in stash but not done any yet. I confirm - in box plastic looks great! Cheers j-W Link to comment Share on other sites More sharing options...
rickshaw Posted April 5, 2019 Share Posted April 5, 2019 As an alternative, try the High Planes Boston. It looks rough but with a little care assembles well and makes an accurate model. Link to comment Share on other sites More sharing options...
Kevin Callahan Posted April 6, 2019 Share Posted April 6, 2019 (edited) If one would complain about the MPM version, one would be appalled at the High Planes version. "Looks rough" doesn't even cover it! Most High Planes models I've seen/built are extremely difficult builds. Basically a bar of soap and a photo of the plane. The Me-262 V1 prototype and a couple of their air racers are the ones I've made it through. We're not talking Merlin level unbuildable, but they are a struggle nonetheless. Edited April 6, 2019 by Kevin Callahan Link to comment Share on other sites More sharing options...
Sydhuey Posted April 7, 2019 Share Posted April 7, 2019 I believe the schemes and markings for this re release are the same as on DK decals sheets for Havoc night fighters 72065 and night intruders 72068, DK has another sheet of UK based Boston's 72062 with D-day Boston IIIA . I have all the Boston kits available and the MPM kits (Later Revell) are the best by far but not the easiest to make . 1 Link to comment Share on other sites More sharing options...
rickshaw Posted April 8, 2019 Share Posted April 8, 2019 On 4/6/2019 at 2:47 PM, Kevin Callahan said: If one would complain about the MPM version, one would be appalled at the High Planes version. "Looks rough" doesn't even cover it! Most High Planes models I've seen/built are extremely difficult builds. Basically a bar of soap and a photo of the plane. The Me-262 V1 prototype and a couple of their air racers are the ones I've made it through. We're not talking Merlin level unbuildable, but they are a struggle nonetheless. All depends, I expect on your perspective. I have never had a real problem with High Planes kits. I am not suggesting they are at Tamigawa level of fit but if care is used, they can and will fit together well and will look good. Please, don't be put off by disparaging comments like this. High Planes are short run kits but they are accurate, unlike some of the big names'. 2 Link to comment Share on other sites More sharing options...
Kevin Callahan Posted April 9, 2019 Share Posted April 9, 2019 Yes, it is all a matter of perspective (isn't most everything?). If you value detail accuracy over buildability, then HPM are custom made for you. I do not; therefore I couldn't recommend an older HPM kit (not sure about the new owners) for those who prize buildability. Link to comment Share on other sites More sharing options...
rickshaw Posted April 12, 2019 Share Posted April 12, 2019 On 4/9/2019 at 10:55 AM, Kevin Callahan said: Yes, it is all a matter of perspective (isn't most everything?). If you value detail accuracy over buildability, then HPM are custom made for you. I do not; therefore I couldn't recommend an older HPM kit (not sure about the new owners) for those who prize buildability. That is your choice. Let us agree to disagree. We both enjoy modelling, just to different standards. High Planes make IMO quite good kits. Your disparaging remarks aside, that is my opinion. Link to comment Share on other sites More sharing options...
Kevin Callahan Posted April 13, 2019 Share Posted April 13, 2019 And I fully respect that. So we're good. 👍 Link to comment Share on other sites More sharing options...
Homebee Posted July 16, 2019 Author Share Posted July 16, 2019 (edited) New boxing/variant expected in september 2019 - ref. SH72413 - Douglas Boston Mk.IV/V Source: http://www.specialhobby.info/2019/07/news-from-special-hobby-082019.html Box art V.P. Edited August 21, 2019 by Homebee 1 Link to comment Share on other sites More sharing options...
Tempestwulf Posted July 25, 2019 Share Posted July 25, 2019 Hoping our lord & savior Mr Airfix will develop one in the coming years. Theirs was a classic and I trust Airfix to do a good job 1 Link to comment Share on other sites More sharing options...
Homebee Posted August 9, 2019 Author Share Posted August 9, 2019 Schemes - ref. SH72413 - Douglas Boston Mk.IV/V : https://www.facebook.com/specialhobby/posts/711458812627815 V.P. Link to comment Share on other sites More sharing options...
Homebee Posted August 21, 2019 Author Share Posted August 21, 2019 Soon - ref. SH72413 - Douglas Boston Mk.IV/V https://www.specialhobby.eu/en/our-own-production/special-hobby/boston-mk-iv-v-the-last-version-in-raf-and-free-french-service.html V.P. 1 Link to comment Share on other sites More sharing options...
Homebee Posted September 13, 2019 Author Share Posted September 13, 2019 Released - ref. SH72413 - Douglas Boston Mk.IV/V https://www.specialhobby.eu/en/our-own-production/special-hobby/boston-mk-iv-v-the-last-version-in-raf-and-free-french-service.html?cur=1 V.P. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now