Jump to content
This site uses cookies! Learn More

This site uses cookies!

You can find a list of those cookies here: mysite.com/cookies

By continuing to use this site, you agree to allow us to store cookies on your computer. :)

The Spadgent

Fun and Folded The Airfix Grumman F4F-4 Wildcat 1/72

Recommended Posts

Hello and welcome to my latest build.

After a few weeks of indecision I literally grabbed a box and went with it. I’ve wanted to build this little gem since I bought it a while back and the folded wing option sold it. :eat:

I’m not sure what or where this is going but as long as I have fun that’s all that counts. I do hope you’ll join me with this one.  I think I’m going to go for the stripy tail option but who knows.:innocent:

Here’s the obligatory box with some lovely art.

45403029362_42dc8086af_b.jpg

The sprues or trees? Are lovely, the parts are really well detailed I love these new tool Airfix kits. 

44540551255_32a0b77b5e_b.jpg

Check out them bumps :lol:

45455212701_cf869bd1bc_b.jpg

The office is first up. All but one of the parts are brilliant, just a few pin marks here that I filled with PPP.

45455212301_4eeea6d2c6_b.jpg

I glued some of the base bits in place and dry fitted the other bits and bobs.

44540550525_52c0d1d66c_b.jpg

and the other side.

45403029132_4a1f54c76f_b.jpg

I think I have some PE belts kicking around I can re-purpose.

just before I finished I cleaned up the main fuselage and did a dry fit.

44540550585_1a179d3b09_b.jpg

Oooh she’s lovely.  I’ll try and get a bit more done this weekend.

Take care fellow Britmodellers and as alway. Happy Modelling.

 

Johnny wildcat. 😺

Share this post


Link to post
Share on other sites

..cockpit looks spoodly, what colour scheme will she end up in?

Share this post


Link to post
Share on other sites

I'd like to see the extended wings with retracted gear option, that way you can simulate dogfights.

Share this post


Link to post
Share on other sites
37 minutes ago, Timmas said:

Ooh a seat  at the front. I'm in for this one...

Cool. Glad to have you on board. 😺

31 minutes ago, Jinxman said:

..cockpit looks spoodly, what colour scheme will she end up in?

It’s great isn’t it. If you look at the box shot it’ll be the bottom option of the two. Probably. :innocent: I think. 

7 minutes ago, Sturmovik said:

I'd like to see the extended wings with retracted gear option, that way you can simulate dogfights.

That would be too easy. The landing gear on this one is ace!!!! 

Share this post


Link to post
Share on other sites

I'm in, Johnny Wildcat! :Tasty:

 

This looks like a little gem 👏

 

Ciao

Share this post


Link to post
Share on other sites
17 minutes ago, giemme said:

I'm in, Johnny Wildcat! :Tasty:

 

This looks like a little gem 👏

 

Ciao

Thanks G. I’ll try to keep it as OOB but I’m not promising at this stage. 😆

Share this post


Link to post
Share on other sites

Looking good so far. I’ll keep watching and get some tips for mine. Cheers Allan 

Share this post


Link to post
Share on other sites

Another new tool Airfix Wildcat/Martlet build on BM, I don’t think I’ll be able to resist adding one (more likely more!) to the stash.

 

Watching with interest.

 

AW

Share this post


Link to post
Share on other sites

I am sitting here with pop corn Johnny.

The U/C is fun but it should not be too much of a problem for you sir.

 

Simon.

Share this post


Link to post
Share on other sites
7 hours ago, almac said:

Looking good so far. I’ll keep watching and get some tips for mine. Cheers Allan 

I’m going to have a mooch around and look for tips too. Great to have you aboard sir. :lol:

7 hours ago, Andwil said:

Another new tool Airfix Wildcat/Martlet build on BM, I don’t think I’ll be able to resist adding one (more likely more!) to the stash.

 

Watching with interest.

 

AW

Awww gawd!!! I didn’t know there was a GB going on. 😮 I’ll try and keep the noise down. 😺

9 minutes ago, Spookytooth said:

I am sitting here with pop corn Johnny.

The U/C is fun but it should not be too much of a problem for you sir.

 

Simon.

Thanks!!! I’ll try and make it a fun un. 

Share this post


Link to post
Share on other sites

Before I continue I was going to use Xf-19 for the full grey and xf-71 xf-1 9:1  for the interior green. Does that sound like a plan? I can’t seem to find any definitive answers. Thanks for any help guys.🖌️

 

Johnny

Share this post


Link to post
Share on other sites

Good news, Johnny with wings again. I'm in :popcorn:

Share this post


Link to post
Share on other sites

I don`t know if this is any good for you Johnny.

 

www.cybermodeler.com/color/cockpit.shtml

 

Simon.

Share this post


Link to post
Share on other sites
34 minutes ago, CedB said:

Good news, Johnny with wings again. I'm in :popcorn:

Indeed! 😄 

22 minutes ago, Spookytooth said:

I don`t know if this is any good for you Johnny.

 

www.cybermodeler.com/color/cockpit.shtml

 

Simon.

Thanks it was. 😎

Share this post


Link to post
Share on other sites

Well you couldn't have much more of a size contrast with the Lanc Johnny!

 

Good start, looking forward to more!

 

Keith

Share this post


Link to post
Share on other sites
5 hours ago, Bigdave22014 said:

Sigh. It's not the helicopter I was hoping for, but it's a good 'un! 

I had the box on the bench for a week then changed my mind at the last minute.

next time. 🤔 I love the emerald internals. 

2 hours ago, keefr22 said:

Well you couldn't have much more of a size contrast with the Lanc Johnny!

 

Good start, looking forward to more!

 

Keith

True! Glad you guys are on board. 🤗

Share this post


Link to post
Share on other sites

A little more done this morning. Mixed up the paint ant went at it. The pin marks won’t be seen when buttoned up.

31602669878_9bae514432_b.jpg44562948785_4eeabe8154_b.jpg

:banghead:in my haste I’d forgotten to pre shade. So I post shaded instead.

Subtle but I like the look.

44562946585_a0eb724c3b_b.jpg30537028557_fe574cec88_b.jpg

I love 1/72 less than 40 drops of paint per air brush top up.

44562946675_a8326b4297_b.jpg

The decals will need to conform over all those bumps, shouldn’t be too bad. I’ll make a few adjustments too.

I masked for the front grey blast.

45477117811_7b10528ac3_b.jpg

Went on well. I’ll let that dry for a bit. Hmmmmmm :pilot:wings.

44562947785_711dc7b660_b.jpg

You get two sets with this kit. I’m using the folded ones.

45477117931_633fc08be8_b.jpg

its nice to get to use clips again.

masking off. Odd but it’s what it says to do.

31602669558_6c7a88c9c3_b.jpg

The office got a bit more paint and decals. I cut up some old PE belts and popped ‘em on.

44562947385_c88a995f44_b.jpg

the decals went on nicely with micro sol.

dry fitting as I go I noticed this hole is too small.

31602669868_3d200c5b9f_b.jpg

A little widening with a swan Morton and BOSH!

45477117831_c501650590_b.jpg

In it went. I did the same on the other side. The decal went on well on the ip with micro sol.

43659781220_5fc5e7ed6b_b.jpg

im not that happy with the cartoonish white lines so I’m going to paint them out.

gloss coat next so I can begin weathering.

Thanks for dropping in. I’m off to pop another slog on the fire. Maybe a spot of wine.

hope you’re all having a wonderful weekend. 

 

Johnny. 🐱

Share this post


Link to post
Share on other sites

Some very nice progress already, Johnny :clap:

Looks like you're going full speed with this one :thumbsup:

 

Ciao

Share this post


Link to post
Share on other sites

Nice work Johnny, looking smart :) 

Share this post


Link to post
Share on other sites

An almost Ced-like rapidity here Johnny: good luck with this little feller, it's looking cracking so far!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...