Miroslav Posted October 20, 2018 Share Posted October 20, 2018 F-4S from Zoukei-Mura is really great model So, I will made model OOB and he will part of my very first special (code name „Trio Bourbon) about Zoukei-Mura Phantoms (F-4C, D and this S). For colloring, I used ModelMission paints... This is F-4S and Heller Gazella, side by side... For cockpit I used FS36231 Dark Gull Grey, MMP-064 and Black for main panels and for some switchers and „clocks" (:-)) MMP-003 Red, MMP-005 Orange i MMP-048 Blue... Glass on radars scope I finished with MMA-006 Gloss Clear Coat. P.S.- Gents, English is not my native language so, please, sorry for any mistakes. Cheers! 7 Link to comment Share on other sites More sharing options...
phildagreek Posted October 20, 2018 Share Posted October 20, 2018 Looks good, can't really go far wrong with a Phantom. 1 Link to comment Share on other sites More sharing options...
whiskey Posted October 21, 2018 Share Posted October 21, 2018 Looking forward to seeing more! 1 Link to comment Share on other sites More sharing options...
Miroslav Posted October 31, 2018 Author Share Posted October 31, 2018 Thank you very much for comments gents! So, this is few steps in building... Cheers! 5 Link to comment Share on other sites More sharing options...
dov Posted November 1, 2018 Share Posted November 1, 2018 Wonderful job. Look, I am now finishing the C version. As you may have seen it. Some important remarks for your job ahead: · Carefully check the air intake parts. Because at the visible face you see the pushing area of the mold! Clean it. Do not oversee it as I did. · Strengthen the air intake with engine. It is all much too flexible, and you may loosen the gluing at the tail end, because of bending the wing when sanding! · Strengthen the fuselage laterally. It is too flexible and you may loosen the gluing area of wing to fuselage! · Take care when you insert the stabilizer. The tolerances my cause the stabilizer to point too far upward at the leading edge! · Care for the wheels as I mentioned in my report! Happy modelling 1 Link to comment Share on other sites More sharing options...
Miroslav Posted November 2, 2018 Author Share Posted November 2, 2018 Hi dov! Thank you very much for your comments, it's very useful! Yes, I see your F-4C build and I follow that, very nice work, indeed. After this S-iera I will start with ZM F-4D... we will be in touch. Link to comment Share on other sites More sharing options...
dov Posted November 4, 2018 Share Posted November 4, 2018 Hi Miroslav Wellcome. My D I will start tomorrow. I finish right now my C version. It will be posted at afternoon! So I will make my D version from Texas, Austin with a grey sheme. Just different. Anyway, an a/c never saw battle! Happy modelling Link to comment Share on other sites More sharing options...
Miroslav Posted November 4, 2018 Author Share Posted November 4, 2018 Hi dov, it's great! I have plan with my D for Januar or February... I will follow your work on D! So, engine parts have a very fine details and I must play with colloring... For paint I used MMP primer (MMS-001 Black Primer) and metallics (MMM-001 Metalic Burnt Iron, MMM-002 Cold Rolled Steel i MMM-003 Aluminium) Cheers! 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now