PLC1966 Posted November 2, 2018 Share Posted November 2, 2018 3 hours ago, fightersweep said: Aye! That's a good drop of beer. Haven't tried the Lancaster beer yet. Must give it a go. Steve I may have a couple of bottles of Lancaster Bomber in the cupboard as we write, it really is a nice beer. 2 Link to comment Share on other sites More sharing options...
fightersweep Posted November 2, 2018 Share Posted November 2, 2018 9 minutes ago, PLC1966 said: I may have a couple of bottles of Lancaster Bomber in the cupboard as we write, it really is a nice beer. Thanks for the heads up. My local Sainsbury's stock it. I may buy a bottle or two...or a whole squadron! 1 Link to comment Share on other sites More sharing options...
fightersweep Posted November 2, 2018 Share Posted November 2, 2018 (edited) 37 minutes ago, Enzo Matrix said: The ugly French ones are the best. https://en.wikipedia.org/wiki/Breguet_Deux-Ponts See! That's lush. Actually, it's quite pretty really. I had things like this is mind; https://en.wikipedia.org/wiki/SAB_AB-20 I mean, "Ewwwww!"....but strangely "Mmmmmm" at the same time 🤣 Edited November 2, 2018 by fightersweep 2 Link to comment Share on other sites More sharing options...
ho590hm Posted November 2, 2018 Share Posted November 2, 2018 If one was looking for an accurate Concorde, the Airfix/Heller 1/72 monstrosity would be in the other direction, Dick Ward had to redesign the decals to fit as he made the error of basing his original work on accurate plans. BAE Systems has just recovered the original prototype drawings to its archive at Farnborough - approximately 8 tons of Mylar representing 200,000+ drawings which has been catalogued by a team of volunteers from Brooklands, Duxford, Yeovilton and Le Bourget. We also have a production drawing set on microfiche. I would therefore dispute the contention that there is a lack of line drawings of this iconic airframe..... There is nothing I would like better than to have an accurate representation in plastic - at either scale. Howard Mason, Heritage Manager, BAE Systems 11 Link to comment Share on other sites More sharing options...
Muddyf Posted November 3, 2018 Share Posted November 3, 2018 I never understood why manufacturers could get model kits of Concorde SO wrong. What other treasures lurk in the archives of BAE and other organisations around the globe waiting to be found? 1 Link to comment Share on other sites More sharing options...
At Sea Posted November 3, 2018 Share Posted November 3, 2018 1 hour ago, ho590hm said: If one was looking for an accurate Concorde, the Airfix/Heller 1/72 monstrosity would be in the other direction, Dick Ward had to redesign the decals to fit as he made the error of basing his original work on accurate plans. BAE Systems has just recovered the original prototype drawings to its archive at Farnborough - approximately 8 tons of Mylar representing 200,000+ drawings which has been catalogued by a team of volunteers from Brooklands, Duxford, Yeovilton and Le Bourget. We also have a production drawing set on microfiche. I would therefore dispute the contention that there is a lack of line drawings of this iconic airframe..... There is nothing I would like better than to have an accurate representation in plastic - at either scale. Howard Mason, Heritage Manager, BAE Systems Thanks for sharing. Glad that BAe have a Heritage manager. This means it isn't a Concorde btw, as logically Mr Mason would have been sworn to secrecy. Link to comment Share on other sites More sharing options...
Albeback52 Posted November 3, 2018 Share Posted November 3, 2018 7 hours ago, fightersweep said: Aye! That's a good drop of beer. Haven't tried the Lancaster beer yet. Must give it a go. Steve It's a fine ale Steve! Try it. You won't be disappointed!😂 Allan! Link to comment Share on other sites More sharing options...
Albeback52 Posted November 3, 2018 Share Posted November 3, 2018 7 hours ago, Plasto said: Ah middle aged blokes and their plastic habits.... By gad sir! I'd object strenuously to the term "middle aged" !! I'm 60 so, surely that's me well past it? - middle age that is! 😂😂 Allan 2 Link to comment Share on other sites More sharing options...
Truro Model Builder Posted November 3, 2018 Share Posted November 3, 2018 7 hours ago, fightersweep said: See! That's lush. Actually, it's quite pretty really. I had things like this is mind; https://en.wikipedia.org/wiki/SAB_AB-20 I mean, "Ewwwww!"....but strangely "Mmmmmm" at the same time 🤣 You aren't like most people, are you? 7 Link to comment Share on other sites More sharing options...
fightersweep Posted November 3, 2018 Share Posted November 3, 2018 22 minutes ago, Truro Model Builder said: You aren't like most people, are you? Proudly unconventional and a bit fruit loop.....which is why my psychiatrist recommended that I come here for my daily therapy. 1 3 Link to comment Share on other sites More sharing options...
Mr T Posted November 3, 2018 Share Posted November 3, 2018 One week and two and two and a half hours to go before some of us are: a) ecstatic to the point of near orgasm over the wonderful new release from Airfix. b) bitterly disappointed that Airfix are producing a new kit in the wrong scale, of the wrong subject and the Fairey Fruitbat would have been best selling kit of all time. c) relief that the new kit is not tempting enough to go into the ever increasingly large stash. I am still hoping that they will announce that the Airfix Vintage range will have the SRN1, that would go to the top of my to build pile when released. I would be happy and it would not cost an arm or leg (I have gone through life with low expectations and see no reasons to change now.) 5 3 Link to comment Share on other sites More sharing options...
tony.t Posted November 3, 2018 Share Posted November 3, 2018 or d) the big new tooling announcement is a refreshed Airfix logo box and instruction book design Tony 1 2 Link to comment Share on other sites More sharing options...
depressed lemur Posted November 3, 2018 Share Posted November 3, 2018 5 hours ago, Albeback52 said: By gad sir! I'd object strenuously to the term "middle aged" !! I'm 60 so, surely that's me well past it? - middle age that is! 😂😂 Allan That depends on how long you intend to live, Sir. I am past 50 myself but see no reason why I can't carry on upsetting people for another 50 at least. I am imortal (so far) 4 6 Link to comment Share on other sites More sharing options...
Albeback52 Posted November 3, 2018 Share Posted November 3, 2018 17 minutes ago, depressed lemur said: That depends on how long you intend to live, Sir. I am past 50 myself but see no reason why I can't carry on upsetting people for another 50 at least. I am imortal (so far) . How long I intend and, how long I actually get are unfortunately two entirely different things! All I can say with certainty is that I intend to grow old(er) (dis)gracefully!! Much more fun that way! Allan 3 Link to comment Share on other sites More sharing options...
Albeback52 Posted November 3, 2018 Share Posted November 3, 2018 (edited) 10 hours ago, fightersweep said: See! That's lush. Actually, it's quite pretty really. I had things like this is mind; https://en.wikipedia.org/wiki/SAB_AB-20 I mean, "Ewwwww!"....but strangely "Mmmmmm" at the same time 🤣 Well, there's ugly and, there's UGLEEEEEEE!! Yuk! Where can I get one!? Allan Edited November 3, 2018 by Albeback52 1 Link to comment Share on other sites More sharing options...
Col. Posted November 3, 2018 Share Posted November 3, 2018 11 hours ago, Enzo Matrix said: The ugly French ones are the best. https://en.wikipedia.org/wiki/Breguet_Deux-Ponts That really is fugly! Although it does prove the 747 was nothing new with it's upper deck seating. Wonder if the cool kids sat in the back seats upstairs... 1 Link to comment Share on other sites More sharing options...
fightersweep Posted November 3, 2018 Share Posted November 3, 2018 7 minutes ago, Albeback52 said: Well, there's ugly and, there's UGLEEEEEEE!! Yuk! Where can I get one!? Allan Telford. When it turns out that this will be the big Airfix announcement! 🤣 3 Link to comment Share on other sites More sharing options...
occa Posted November 3, 2018 Share Posted November 3, 2018 4 hours ago, Mr T said: One week and two and two and a half hours to go before some of us are: a) ecstatic to the point of near orgasm over the wonderful new release from Airfix. b) bitterly disappointed that Airfix are producing a new kit in the wrong scale, of the wrong subject and the Fairey Fruitbat would have been best selling kit of all time. c) relief that the new kit is not tempting enough to go into the ever increasingly large stash. I am still hoping that they will announce that the Airfix Vintage range will have the SRN1, that would go to the top of my to build pile when released. I would be happy and it would not cost an arm or leg (I have gone through life with low expectations and see no reasons to change now.) d) take it as it is and live their life as always :) 1 Link to comment Share on other sites More sharing options...
daneel Posted November 3, 2018 Share Posted November 3, 2018 New tool Avro Vulcan in 1/72 scale, to complete their V-bomber series... 1 Link to comment Share on other sites More sharing options...
Denford Posted November 3, 2018 Share Posted November 3, 2018 (edited) On 11/3/2018 at 8:37 AM, Mr T said: One week and two and two and a half hours to go before some of us are: a) ecstatic to the point of near orgasm over the wonderful new release from Airfix. b) bitterly disappointed that Airfix are producing a new kit in the wrong scale, of the wrong subject and the Fairey Fruitbat would have been best selling kit of all time. c) relief that the new kit is not tempting enough to go into the ever increasingly large stash. I am still hoping that they will announce that the Airfix Vintage range will have the SRN1, that would go to the top of my to build pile when released. I would be happy and it would not cost an arm or leg (I have gone through life with low expectations and see no reasons to change now.) You are all too right about the Fairy Fruitbat. - It's Iconic - No line up of British Planes is complete without it. - Modellers are crying out for it - I know it would sell Worse still, 1st April was its 72nd anniversary: by not releasing a 1/72 kit then, Airfix certainly missed a trick. Edited November 4, 2018 by Denford 2 3 Link to comment Share on other sites More sharing options...
Aeronut Posted November 3, 2018 Share Posted November 3, 2018 14 hours ago, Mr T said: One week and two and two and a half hours to go before some of us are: a) ecstatic to the point of near orgasm over the wonderful new release from Airfix. b) bitterly disappointed that Airfix are producing a new kit in the wrong scale, of the wrong subject and the Fairey Fruitbat would have been best selling kit of all time. c) relief that the new kit is not tempting enough to go into the ever increasingly large stash. I am still hoping that they will announce that the Airfix Vintage range will have the SRN1, that would go to the top of my to build pile when released. I would be happy and it would not cost an arm or leg (I have gone through life with low expectations and see no reasons to change now.) I’m hoping it’s ‘c’ unless of course the announcement is a Beverley in which case it will be ‘a’ with knobs on. 2 Link to comment Share on other sites More sharing options...
Nocoolname Posted November 4, 2018 Share Posted November 4, 2018 Or... d) 'Meh!' 2 Link to comment Share on other sites More sharing options...
falcon Posted November 4, 2018 Share Posted November 4, 2018 1/72 Canberra B.Mk.2 7 Link to comment Share on other sites More sharing options...
Caerbannog Posted November 5, 2018 Share Posted November 5, 2018 On 03/11/2018 at 00:50, ho590hm said: If one was looking for an accurate Concorde, the Airfix/Heller 1/72 monstrosity would be in the other direction, Dick Ward had to redesign the decals to fit as he made the error of basing his original work on accurate plans. BAE Systems has just recovered the original prototype drawings to its archive at Farnborough - approximately 8 tons of Mylar representing 200,000+ drawings which has been catalogued by a team of volunteers from Brooklands, Duxford, Yeovilton and Le Bourget. We also have a production drawing set on microfiche. I would therefore dispute the contention that there is a lack of line drawings of this iconic airframe..... There is nothing I would like better than to have an accurate representation in plastic - at either scale. Howard Mason, Heritage Manager, BAE Systems Well - I could not find any line drawing when I searched for one two years ago. Sure there will be drawings somewhere - but they are not easy to be found. At least not for me 🙂 (in books, the internet, asking around). I suppose you could make many people happy with a nice coffe table size Concorde book with line drawings and such. No need for long text on the subject - just the technical drawings. Link to comment Share on other sites More sharing options...
Folkbox1 Posted November 5, 2018 Share Posted November 5, 2018 Mark IV tank in 24th scale or a Camel in the same scale Link to comment Share on other sites More sharing options...
Recommended Posts