Jump to content

Wright Bellanca WB-2 Columbia New York - modified Khee-Kha vacuformed 1/72nd kit


Recommended Posts

A model from 6 years ago:

 

As some of you may know, Charles Lindbergh wanted to purchase a Wright-Bellanca WB-2 for his epic Atlantic crossing flight. The plane had widely demonstrated its capabilities and potential several times, one of them with an endurance record in closed circuit that had miles to spare to cross the Atlantic. But Wright (company of engine fame) had sold to Bellanca and Levine the rights of the plane, now owned by their recently-formed company, “Columbia”. Levine tried to manipulate Lindbergh into a not very good deal, so Charles left and went to buy the soon-to-be universally famous Ryan NYP. Too bad for Levine. Nevertheless Levine was committed to demonstrate the plane’s worth, and since Lindbergh had accomplished the famous feat, he planed for a flight to beat Lindbergh’s record, that will reach Berlin. Chamberlin was its pilot, and Levine jumped in at the last second before departure. They actually flew to Germany, but had to unintentionally land twice in two little German towns before actually reaching Berlin. 

This plane, as many others, went through some minor modifications during its life. You may notice in photos a temporary annular exhaust ring between the engine and the front of the cockpit, a “pointed” spinner, or a visible propeller boss, many changes in the livery of the plane, too many to be described here, even a different propeller that was lend to the crew when they broke theirs in a nose over on route to Berlin.
A sort of Townend ring can be seen in a few photos too.
Bear especially in mind that the “replica” Columbia in an American museum is not at all a WB-2, but a Bellanca Skyrocket with some cosmetic treatment and it is as far removed from the real thing as a merry-go-around wood horse from the animal galloping on the prairies.

Some times the Columbia is represented with yellow wings, that’s not accurate, since the wings were covered in clear-doped fabric, which has a yellowish tinge to it, but it is not at all like yellow paint.

The lettering over the plane, once the record attempt started to be prepared, said “New York / Paris”; “Paris” was later changed to a hastily-written “Berlin”, then a more properly “Berlin” although in a different font than the rest, then other cities were added as the plane made its way around Europe.
The base for this adaptation is the vacuformed 1/72 scale Bellanca CH-300 issued by Khee-Kha Art Products of Alaska.
The Bellanca kit includes resin detail parts cast to a very high standard, vacuformed windshield and material to make the side windows.

Some of these items could not be used given the differences between the CH-300 and the WB-2. A new Wright J-5 engine was located, together with adapted white metal prop and wheels from Aeroclub. The resin nose of the kit was modified to represent the WB-2 one, adjusting minimally its shape, erasing most of the louvers, and adding a couple of other details. A left-over spinner was modified to adapt it to this particular plane.

First the wings have to be modified by erasing the “baleens” under the wing tanks and puttying, sanding and re-scribing the wing tanks and ailerons, which had a slightly different position. Then a new vertical stabilizer was built.

I have built many vacuformed kits. The more I build them, the more I like them.

List of changes (as a general guide, some areas of course involve further detail changes, like cockpit and cabin, etc)

1) Wing tanks

2) Ailerons

3) Engine / carburetor intake

4) Nose cowling

5) Prop/spinner

6) Vertical stabilizer

7) Wing struts (no “break” on the front strut geometry)

8 ) Landing gear

9) Windshield / side windows

10) Erase baleens under the wing tanks

11) Under fuselage fuel jettison fairing

12) Stitching visible on the fuselage sides

13) Stitching (some times taped-over-) over the cabin/aft fuselage joint

14) Interior

15) Deletion of right-side fuselage door

16) Deletion of aft access panel on left-side fuselage
17) Anemometer
18) Pitot

 

01.jpg

 

02.jpg

 

60.jpg

 

61.jpg

 

62.jpg

 

36.jpg

 

40.jpg

 

44.jpg

 

59.jpg

 

63.jpg

 

64.jpg

 

65.jpg

 

66.jpg

 

68.jpg

 

70.jpg

 

87.jpg

 

81.jpg

Edited by Moa
By default when you write eight follow by a parenthesis it renders a smiley. Bugger!
  • Like 26
  • Thanks 1
Link to comment
Share on other sites

Your vacform models are every bit as good as your scratch builds! Thanks again for the background and details of the differences in the types. This is not as graceful as the Albatros but it is certainly a model to catch the eye. With all that fuel in the fuselage this must have been a flying bowser!

 

P

  • Haha 1
Link to comment
Share on other sites

That is scrum-diddly-umptious Mr Moa  - what  lovely little plane with such an interesting story-line. I also enjoyed your attempt at macrame in the tail-feather shot. Thanks again for a break-down image to show just what you work with - great stuff!

  • Haha 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...